塑化

D组：超声K型锉和氯仿去除根管内塑化物。

Group D : Chloroform with ultrasonic K file .

转矩流变仪在测定PVC树脂塑化性能方面的应用

Application of torque rheometer in plasticization property determination of PVC resin

塑化企业ERP系统的设计与研究

Design and Research on ERP Management System for Plastic Enterprise

硬质PVC挤出发泡材料的塑化性能研究

Study on the fusion properties of extruded foaming rigid PVC

与PVC异型材塑化质量相关的两个问题

Two problems concerning the plastification quality of PVC profiles

PVC塑化木粉及其吸水性

PVC plasticized wood powder and its water absorption

PVC异型材塑化质量的探讨

Approach to Plasticizing Quality of PVC Profiles

研究了丙三醇对淀粉塑化前后结构的影响，用X射线衍射仪对淀粉塑化前后的结晶性能进行了研究。

The effect of glycerol to the starch structure and the crystal property were studied by SEM and XRD .

高压CO2对聚丙烯具有塑化作用。

Compressed CO_2 has a plasticization effect on polymers such as polypropylene ( PP ) .

A组，采用干髓术；B组去髓后根管治疗结合塑化治疗。

Group A were cured by Mummification , Group B removed the pulp , root canal filling performed , Combined with phenol-formaldehyde liquid filling root canal .

从硬聚氯乙稀（PVC）塑料纱管的塑化度入手，介绍了制品塑化度与其抗冲强度、屈服强度的关系；

Starting with modelbility of hard PVC tubes , the paper presents the relationship between modelbility , impact and yield ability .

介绍了消光PVC树脂的应用及性能，研究了消光PVC树脂的凝胶含量、用量等因素对制品的消光性能及塑化性能的影响。

Influences of gel content and use level of dull PVC resin on the extinction property and plasticizing property of products were studied .

目的：对展神经、面神经、前庭蜗神经进行塑化切片与MRI对照研究，获得正常影像和断层解剖资料。

Objective : To obtain the normal image and sectional anatomical data of the abducent nerve , facial nerve , vestibulocochlear nerve with MRI and plastination .

主要用于PVC管、板、片、膜、型材、造粒等塑料制品的塑化和挤压成型。

It is mainly used in plasticizing , extruding and forming PVC pipe , plate , sheet , film , profile , and granulator etc.

通过扫描电镜（SEM）、差示量热扫描仪（DSC）等现代检测手段，对天然淀粉制备TPS的塑化机理进行了分析。

The starch plasticizing mechanism was studied by scanning electron microscope ( SEM ) and differential scanning calorimetry ( DSC ) .

在不影响塑化的情况下，增加PE蜡用量可提高型材表面光亮度；

In the case of no effect on the plastification , the surface gloss could be improved by the increase of the the content of PE wax ;

采用电磁动态注射成型机塑化聚丙烯（PP）与纳米CaCO3的共混料。

The mixture of polypropylene ( PP ) and nano-CaCO_3 raw materials were plasticated in an electromagnetic dynamic injection molding machine .

研究结果表明，超细空心微珠加入到硬质PVC管材中，可以明显改善PVC硬管的加工流动性能，显著缩短塑化时间，降低最大扭矩。

Results show that the processability of cenospheres / PVC U pipe system is improved obviously , plasticizing time is shortened and the maximum torsinal moment is decreased .

根据丙纶帆布的性能，采用PVC低温塑化法（120℃以下）防水整理工艺生产丙纶防水帆布。

According to the characteristics of polypropylene canvas , polypropylene water-proof canvas is produced by water-proof finishing process of PVC low temperature ( below 120 ℃) plasticized method .

通过X射线衍射和扫描电镜分析了甘油/尿素/乙醇胺复合增塑剂的增塑效果和结晶行为，结果表明复合增塑剂可以使淀粉塑化，能明显抑制红苕淀粉的重结晶。

Analyzed the plasticized effect and crystal behavior by XRD and SEM , it showed that com-plasticizer can make sweet potato starch plasticized and keep down the crystallinity of sweet potato starch .

研究了UHMWPE在挤出过程中物料输送及熔融塑化机理。

The mechanism of conveying , melting and plasticating of UHMWPE in the extruder were investigated with screw extraction experiment .

采用表面电阻测试和扫描电镜，分析研究了软质聚氯乙烯（PVC）树脂与炭黑（CB）复合体系的抗静电性与炭黑含量、分布形态、PVC树脂型号及混炼塑化工艺之间的关系。

Antistatic properties of carbon black ( CB ) filled plasticized poly ( vinyl chloride ) ( PVC ) were studied using surface resistivity tester and SEM .

本厂生产的全塑整芯阻燃输送带是以绵、涤和棉线纺织而成的整体带芯的骨架，浸渍PVC糊体，经高温塑化而成。

TPB with f & r , bone-like belt , is filled with cotton and other textile and has been sucked in PVC liquid , then molded with high temperature .

通用型螺杆与分离型螺杆对注射用PVC-U复合粉料塑化效果的比较

The plasticizing effect comparation of all-purpose screw with separation-type screw on the injection of PVC-U composite powder

应用差示扫描量热法（DSC）技术研究了RPVC管材的塑化度或凝胶化度，并辅以二氯甲烷浸渍试验。

Utilize DSC technology for studying on plasticizing or coagulating degree of RPVC-U , supplement dichloromethane resistance testing .

通过DSC技术与方法，定量了RPVC配料的塑化度或凝胶化度。

This paper lays stress on DSC technology and method for measurement plasticizing or coagulating degree of RPVC mixture .

改性PVA塑化温度的研究表明，醇解度为88%的PVA，随相对分子质量的增加塑化温度升高。

Melting temperature of the modified PVA indicated that the melting temperature of PVA with the alcoholysis of 88 % increased with the increasing of the molecular weight .

本工作利用进口Brabender塑化仪，对共混体进行混炼和动态硫化。

By use of Brabender Plasticator , the blends were mixed and dynamically vulcanized .

实验表明：ACR加工助剂能够促进PVC体系的塑化，提高熔体强度及均匀性，对PVC的力学性能没有明显的不良影响。

The experiments showed that ACR processing additive could promote the plasticization of PVC , increase the intensity and homogeneity of melt , and had no obvious bad effects .

简要介绍了γ－TiAl基合金性能与其显微组织的关系以及该合金的变形、断裂、韧化机制，由此归纳出了γ－TiAl基合金的塑化、初化途经。

He relation of properties with microstructure and the mechanisms of deformation , fracture and toughening have been briefly introduced for γ - TiAl based alloys .