嵌入式系统设计

用于Web计算的Java虚拟机嵌入式系统设计

The embedded system design of Java virtual machine used to Web computing

基于JET技术的嵌入式系统设计方法研究

Embedded System Design Method Based on JET

基于ARM的手持式OTDR嵌入式系统设计

Design of Embedded System of Hand-Held OTDR Based on ARM

可编程片上系统（SOPC）设计是一个崭新的、富有生机的嵌入式系统设计方向。嵌入式集成化设计己成为电子领域发展的一种趋势。

The system-on-a-programmable-chip ( SOPC ) design is a brand-new direction of embedded systems .

其次研究了嵌入式系统设计的总体方法，给出了设计要点，提出了AP的设计方案。

Secondly , the implementation scheme of AP is established on basis of the study of design points of embedded system .

ARM7强实时嵌入式系统设计

Design of Hard Real-time Embedded System Based on ARM 7

抽象化的双层变迁定时PETRINET可用于嵌入式系统设计过程的中间态模拟。

The abstracted double transitions timed Petri Net can be used to model the intermediate results ( as well as the final results ) of embedded system design .

随着信息技术发展步入后PC时代，嵌入式系统设计，尤其是以涉及Internet应用的设计，正成为当前科技发展的一大热点。

Embedded system design especial the application of Internet has become an emphasis with the fast development of information technology . It seems that a new age called post-PC era is incoming .

提出基于可编程片上系统（SOPC）的嵌入式系统设计流程及其所涉及的主要设计问题。

It puts forward the design flow and design issue of embedded systems based on system-on-a-programmable chip ( SOPC ) .

Codezero还专门针对嵌入式系统设计，支持多核处理器和基于ARM的设计。

Codezero was also designed specifically for embedded systems and supports multicore processors as well as ARM-based designs .

CMXRTOS在嵌入式系统设计中的应用

The application of the CMX RTOS based on the design of embedded system

文章采用一种基于UML的嵌入式系统设计方法，通过分阶段推进建模，最终运用各种UML图形可视化的描述清楚数据采集网关系统结构。

The paper used a UML-based embedded system design methodology . Through a phased modeling , the method finally described data acquisition gateway system structure clearly visually by utilizing various UML graph .

可编程片上系统（SOPC）的设计是一个崭新的富有生机的嵌入式系统设计研究方向。

The design of system on programmable chip ( SOPC ) is a new and vital aspect for the research of embedded system designing .

通过例子使用者可以快速掌握系统架构，并具有建立基于ARM9内核芯片嵌入式系统设计的能力。

The users can master the embedded system based on ARM 9 rapidly .

该框架的应用，缩短了CGI程序的开发周期，并且降低了开发难度。文章的最后对数字水印技术理论和应用研究的趋势进行了分析，并探讨了UML在嵌入式系统设计中的应用前景。

The last part of the paper analyzes the research trend of digital watermarking theory and applications , and discusses the usability of UML in the design of embedding system .

随着可编程逻辑门阵列FPGA器件成为嵌入式系统设计领域的研究热点，基于FPGA器件的新型动态局部重构技术受到学术界广泛的关注。

As Field Programmable Gate Arrays ( FPGAs ) are very popular in the field of embedded systems design , a novel technique Dynamic Partial Reconfiguration ( DPR ) based on FPGA is paid attention by the academia .

将UML用于μC/OS-Ⅱ的结构描述，进而用于以μC/OS-Ⅱ为实时操作平台的嵌入式系统设计。

In this paper , the UML is used to describe the structure of C / OS - ⅱ, and then is applied in the design of the embedded system based on C / OS - ⅱ .

目前，基于SOC技术的嵌入式系统设计主要有两种方法：基于专用集成电路的ASIC（applicationspecificintegratedcircuit），以及基于可编程逻辑器件的SOPC（SystemonaProgrammableChip）。

Currently , the design of embedded system according to SOC has two kinds of methods : According to ASIC ( the Application Specific Integrated Circuit ) and the SOPC ( the System On a Programmable Chip ) of the programmable logic component .

随着深亚微米技术的出现，现场可编程逻辑门阵列（FPGA）得到了迅猛发展，也使得可编程片上系统（SOPC）成为未来嵌入式系统设计技术发展的必然趋势。

With the emergence of submicron technology , FPGA chips have developed rapidly , thus making the SOPC ( system on a programmable chip ) design the mainstream technique in embedded system design field .

应用需求的牵引和IT技术的推动使得嵌入式系统设计方法不断演化，出现了三种不同层次的设计方法：①以PCBCAD软件和ICE为主要工具的设计方法；

The demand of IT technology makes design method of the embedded system evolve constantly , the design methods of three kinds of different levels have appeared : ① design method taking PCB CAD software and ICE as main tool ;

通过对当前存在的三种XML解析技术进行深入的分析比较后，面向嵌入式系统设计实现了一个采用XPP解析技术的非验证型XML解析器。

After analyzing and comparing the three XML parsing technologies emphatically , this paper designs and realizes a non-validate XML parser based on XPP parsing technology , which is aiming for embedded system .

最后从嵌入式系统设计的角度开发设计了电话数码录音机，将MTUCOS微内核进行实例化的应用。

Finally , designing and developing a telephone digital recorder ( Dictaphone ) from the view of embedded system design , and instantiating the application of MT_UCOS micro-kernel ;

同步数据流图（SynchronousDataflowGraph，SDF）是一个在嵌入式系统设计中应用很广泛的模型。

Synchronous Data flow Graph ( SDF ) is a model of computation that has been widely used in block diagram Digit Signal Processing ( DSP ) programming environment .

介绍了可编程片上系统SOPC导致嵌入式系统设计变革的原因及优势，分析了基于FPGA的可编程片上系统的设计方法，提出了嵌入IP核的SOPC系统的解决方案。

To introduce the cause and advantages of SOPC resulted from in the innovation of system-embedded design , analyze the design method of system on programmable chip based on FPGA , and present the solution of embedded IP core of SOPC system .

本文主要从硬件和软件设计方面阐述了基于ETX模块的嵌入式系统设计与实现。

In this paper , the embedded system based on ETX is elaborated from two aspects , namely , hardware system design and software program design .

传统的嵌入式系统设计开发方法无法满足SoC设计的特殊要求，这给系统设计人员带来了巨大的挑战和机遇，因此针对SoC的设计方法学已经成为当前研究的热点课题。

The traditional methods cannot meet the particularities of SoC designs , which brings chances and challenges to the system designers . Therefore , the design methodology for SoCs has become a hot topic . Firstly , the tendency to design embedded systems is analyzed .

本文分析了NIOS处理器的性能结构，提出了具有PCI接口电路的NIOS开发系统设计方案，并给出了基于该开发系统的软硬件设计流程，为基于FPGA的嵌入式系统设计提供了思路。

This paper analysed the performance and structure of NIOS processor and put forword the project of NOIS system with PCI interface circuit . Finally , the development flow of NIOS Processor-based design is given . Jt will put forward an approach for embedded system design based on FPGA .

是一种有效的嵌入式系统设计方法。

It is a very effective design method for embedded system .

基于双机热备结构的嵌入式系统设计

Design Of Embedded System based on Dual Module Hot Spare Architecture

因此，本研究课题对嵌入式系统设计有很大的实用价值。

Therefore , the study has much practicality value for embedded design .