软盘驱动器

ruǎn pán qū dònɡ qì
  • floppy disc drive;floppy disk;drive
软盘驱动器软盘驱动器
  1. 它最初是为小于500K的软盘驱动器设计的简单文件系统。

    It was originally developed as a simple file system suitable for floppy disk drives less than500K in size .

  2. 大多数装有BIOS的电脑先开始检测软盘驱动器中是否存在操作系统,然后再检测主硬盘驱动器。

    Most of the computer with BIOS set to check for the presence of an operating system in the floppy disk drive fist ( A : ), and then testing the main hard drive .

  3. 标准功能,如第2,串行接口,一个并行接口,软盘驱动器和CDROM驱动器提供。

    Standard features such as2 serial ports , one parallel port , a diskette drive and a CD ROM drive are provided .

  4. 引导驱动器通常是第一个软盘驱动器(在DOS下指定为A:,而Linux下指定为/dev/fd0)。

    The boot drive is usually the first floppy drive ( designated A : in DOS and / dev / fd0 in Linux ) .

  5. 可在其中安装Linux的移动设备的范围包括从软盘驱动器到USB闪存设备,再到USB/FireWire硬盘驱动器等等。

    The range of removable devices onto which Linux may be installed ranges from floppy drives , through USB-flash devices , on to USB / FireWire hard drives , and more .

  6. 智能启动管理器(豆饼),它可以启动了CD-ROM和软盘驱动器的电脑上错误的BIOS。

    Smart Boot Manager ( SBM ), which can boot off CD-ROM and floppy drives on computers with a faulty BIOS .

  7. 可以从支持的设备(如软盘驱动器、CD、USBkey或主驱动器上的微小分区)执行初始引导步骤,然后使用外置驱动器进行其他操作。

    You can perform the preliminary boot steps from a supported device such as a floppy drive , CD , USB key , or a tiny partition on the main drive , and then use the external drive for everything else .

  8. 现在所有的BIOS都允许将软盘驱动器在检测列表中向后移,从而可以将正常的启动时间减少几秒钟。

    Now all of the BIOS will allow detection of the floppy disk drive in the list of backward-shift , which can reduce the normal start-up time a few seconds .

  9. 软盘驱动器通常是(fd0)。

    A floppy drive is usually ( fd0 ) .

  10. IBM-PC/XT以模拟PerSci227型8吋软盘驱动器的方式为FX&90Q工作,只需在FX-90Q上用光笔发出命令,便可以实现两机之间的NMR数据和操作程序的并行传送。

    NMR data , as well as programs required for running the whole FX-90Q , could be transferred in parallel mode between the two instruments simply by issuing lightpen commands on FX-90Q 's screen .

  11. 系统具有各种必要的控制及数据线路,可以与CRT、标准键盘、针型行打、EPROM编程器、单面双密度软盘驱动器、盒式磁带录音机等相接。

    This system contains all necessary control and data circuitry to interface with CRT , standard ASCII keyboard , matrix line printer , EPROM programmer , dual single side double density floppy disk drive , cassette tape recorder , etc.

  12. 大容量软盘驱动器定位系统的研究

    The Research of Positioning System for High Capacity Flexible Disk Drive

  13. 微机软盘驱动器常见故障及维修

    Common Faults and Maintenance of the Driver for Microcomputer 's Diskette

  14. 请将格式化的磁盘插入选定的软盘驱动器。

    Insert a formatted disk into your selected floppy disk drive .

  15. 请从软盘驱动器中取出客户端安装盘。

    Please remove the client setup disk from your floppy drive now .

  16. 安装程序无法取得所选软盘驱动器的配置信息

    Setup is unable to get configuration information for the selected floppy disk drive

  17. 软盘驱动器信息互换性测试技术

    The Technology pf Floppy Disk Drive Information Interchange Test

  18. 家庭网络向导找不到计算机中的软盘驱动器。

    The Home Networking wizard did not find a floppy drive on your computer .

  19. 软盘驱动器磁头的调整

    The Adjustment of Magnetic Heads of Floppy Drivers

  20. 转向盘调节装置操纵件软盘驱动器控制装置

    Steering wheels adjustment control FDC Floppy Disk Controller

  21. 8098单片机与软盘驱动器接口技术

    8098 interface with IBM floppy disk driver

  22. 将文件复制到软盘驱动器时出现错误。

    Error copying files to floppy drive .

  23. 许多嵌入式系统不进行硬盘或软盘驱动器与他们。

    Many embedded systems do not carry hard disk or floppy disk drives with them .

  24. 没有检测到软盘驱动器。

    No floppy drive was detected .

  25. 您必须指定软盘驱动器和要创建的磁盘数。

    You must specify the floppy disk drive and the number of disks you want to create .

  26. 介绍了微机软盘驱动器的常见故障及排除方法。

    This paper introduces the common faults of the driver for microcomputer 's diskette and eliminating methods .

  27. 检查软盘驱动器,以确定驱动器门已经关闭且装有正确的磁盘。

    Check the floppy drive to make sure the door is closed and it contains the correct disk .

  28. 在网络图中添加5.25英寸软盘驱动器或其他类型的可移动介质。

    Adds a 5.25-inch floppy computer disk drive or other type of transportable media to your network diagram .

  29. 软盘驱动器控制装置

    FDC Floppy Disk Controller

  30. 若要完成安装,请清除计算机软盘驱动器中的所有磁盘并单击“立即重启”按钮。

    To complete the installation , remove all discs from your computer 's floppy drives and click the restart now button .