伺服机

  • 网络server;servo
伺服机伺服机
  1. 不接电脑,插接电变的BEC,及数位伺服机,离线使用程式卡。

    Plug BEC from ESC , then digital servo into this card for offline use .

  2. 气动伺服机间输送机的研制

    Development of Shuttle Conveyer by Pneumatic Servo System

  3. 而对转台伺服机采用脉冲串结合RS232串行通讯的大闭环控制。

    Pulse clusters generator and the RS232 communication are used simultaneously to accomplish the closed control of the rotate table .

  4. 针对目前辊压线剪切系统存在的问题,提出了一种采用直流伺服机驱动、PLC控制的飞剪控制系统,并给出了伺服同步控制器的设计方法和控制流程图。

    Aiming at the existing problems of cutting system in profile rolling production line , a shear control system with DC servomotor and PLC is presented . The design method of servo synchronization controller for shear control system and the control flow chart are described .

  5. 稀土永磁空心杯转子直流伺服机特点及工艺分析

    Analysis of Feature and Technology for the REHM DC Servomotors with Air-core Rotors

  6. 50%省电效率与自动伺服机。

    Economize electricity of attrition is50 % efficiently that is serving control automatically .

  7. 双伺服机分层旋转货架拣选路径优化的两级遗传算法

    Two-level Genetic Algorithm in Order-picking Optimization for a Multi-carousel System with Two Servers

  8. 利用伺服机对大理岩进行高围压及高围压高水压岩石的卸荷力学试验。

    Using the RMT-150B servo-controlling testing machine , unloading mechanical tests of marble under high confining pressure and high water pressure conditions were carried out .

  9. 就可用性而言,这个计算系统是一个冗余设计,有两组处理器和总线,能够在主机无应答的情况下在主机和伺服机之间进行切换。

    For availability , this computing system was a redundant design , with two sets of processors and buses and the ability to switch between a master and a slave if the master was found to be unresponsive .

  10. 10T型电液力伺服试验机系统的分析建模及其实验修正

    The analytical modelling and experimental modification for 10t electro-hydraulic force servo testing machine system

  11. 在MTS伺服疲劳机上对混凝土进行动态受拉试验,分析试验结果,发现混凝土的抗拉强度与应变率的对数近似成线性关系;

    Dynamic experiment of concrete in tension subjected to various strain rates is carried out on the servo fatigue machine and the experiment results are analyzed .

  12. 应用INSTRON刚性伺服试验机对不同灰砂比的充填体进行了劈拉试验,测得荷载-位移和应力-应变全曲线。

    A series of splitting tensile tests were conducted by using an INSTRON testing system to investigate the effect of cement-tailings ratio on the properties of backfill .

  13. 利用MTS815电液伺服试验机测出了碳化混凝土的受压全应力-应变曲线。

    In the paper , the stress-strain relationship of carbonation concrete was obtained by MTS815 servo-control tester .

  14. 应用Instron液压伺服试验机和分离式Hopkinson压杆对经锻造和热处理的钽材在不同温度不同应变率下的性能进行了试验。

    The thermomechanical responses of forged and annealed Ta were investigated at different temperatures and different strain rates , using Instron servohydraulic testing machine and the split Hopkinson compression bar .

  15. 在MTS815岩石伺服试验机上进行了煤岩全应力-应变过程中的渗透性试验,揭示了煤岩在变形破坏过程中的渗透率变化规律。

    The permeability test of coal in the complete stress-strain process is carried on the MTS815 Servo-controlled Rock Mechanical Test System .

  16. 注塑厂全部采用日本JSW电动伺服注塑机及配套日本进口的周边设备。

    High precision , stability and efficiency of our full electric-driven servo injection molding machines from JSW , and its accessory equipments import from Japan .

  17. 利用RMT-150B岩石刚性伺服试验机完成了不同含水率状态的膨胀岩单轴抗压强度试验,分析研究了膨胀岩力学参数随含水率状态的改变规律。

    By using the RMT-150B servo rock testing system , we have performed uniaxial compression test and analysed mechanical parameter of swelling pressure at different water contents .

  18. 采用RMT,MTS刚性伺服试验机,研究了三峡工程中隔墩花岗岩在三点弯曲断裂、劈裂拉伸、三轴压缩及单轴抗压等4种加载方式下的能耗特征。

    In order to get the energy dissipation characters of Three Gorges granite under different loading modes , the complete procedure experiments of 3-point binding , Brazilian tension , uniaxial compression and triaxial compression are conducted with servo-controlled testing machines MTS and RMT .

  19. 电伺服折弯机的同步控制及仿真研究

    Research on Synchronous Control and Simulation of Electric Power Press Brakes

  20. 节能型高效伺服注塑机设计

    Design of Energy-saving and High Efficient Servo Injection Moulding Machine

  21. 静态电液伺服试验机测控软件控制命令系统的探讨

    Discussion on Control Command System of Measurement and Control Software for Testing Machine

  22. 基于干扰观测器的高精密伺服注塑机的计量控制

    Metering Control of Accurate Servo Injection Molding Machine Based on a Disturbance Observer

  23. 直线永磁伺服电机机电子系统解耦的速度跟踪控制

    Mechanical and electrical subsystem decoupled control of speed tracking for AC linear permanent magent synchronous servo motor

  24. 基于PC机的高速伺服注塑机转速控制的实现

    The realization of rotate speed control based on the PC for a high speed servo injection molding machine

  25. 采用岩石力学伺服试验机,对非贯通预制裂纹大理岩进行了单轴压缩试验;

    Uniaxial compression tests were carried out for marble with intermittent pre-existing cracks by using the rock mechanics servo-controlled testing system .

  26. 介绍了PC机下高速伺服注塑机转速控制的实现方法,具体分析了转速控制的硬件设计和软件实现,用内存驻留获得高精度定时信号。

    In the paper , the realization of rotate speed control for an high precision servo injection molding machine is introduced .

  27. 基于在伺服试验机对煤样的常规三轴压缩和三轴卸围压试验,分析了煤样在不同应力条件下的强度和变形特征。

    The pseudo-triaxial compression tests and confining pressure reduction tests were carried out for coal specimen strengths in different stress on servo-controlled testing machine .

  28. 本文以长春试验机研究所300KN电液伺服试验机为基础,具体说明了系统改进升级的必要性和系统辨识过程。

    Based on the servo piston system of Changchun experimentation machine academe , the paper narrates the necessity and the process of system identification .

  29. 利用伺服试验机对岩样进行常规三轴的加载、卸载试验,研究岩样变形特性与应力状态的关系。

    The stress path of failure of rock mass is very complicated , which is different to the loading path of specimen in laboratory .

  30. 利用伺服试验机和文献上的试验结果得到了不同岩石的平均模量与围压的关系。

    Experimental results from servo-controlled testing machine and public references are used to study the relation between confining pressure and Young 's modulus for various rocks .