全模

  • 网络syntype;All mode
全模全模
  1. 2.4m跨声速风洞全模颤振变速压的控制策略

    Control Tactics of Complete Model Flutter Testing by Adjusting Dynamical Pressure in 2.4m Transonic Wind Tunnel

  2. 本文简要介绍了CARDC全模颤振试验技术的研究情况。

    The research of full model flutter test technique in CARDC is briefly presented in this paper .

  3. 跨声速风洞全模颤振试验悬浮支撑系统

    Floating suspension system for full model flutter test in transonic wind tunnel

  4. 夯扩桩桩端夯扩效果全模试验研究

    Full pile model tests of end bearing capacity of rammed pedestal piles

  5. 文中简单介绍了半模和全模两期抖振试验的主要结果,提及了研究中存在的不足和将来研究应改进或加强的工作。

    Test results of a half-model and a complete model , deficiency of the research , and the follow-on improvements are also introduced .

  6. 基于相似理论,提出了一种新的夯扩桩全模试验研究方法及试验装置。

    Based on similar theory , a new method of full pile model test and a new type of experimental equipment are proposed .

  7. 全模颤振试验技术研究包括从国外引进了悬浮支撑系统,研制了颤振试验数据采集与系统和安全系统,开发了数据处理软件,改造了风洞控制系统和颤振模型等。

    The full model flutter test technique include the introduction of the floating suspension system , the development of safety system and flutter test data acquiring & processing system , and the reconstruction of wind tunnel control system and flutter model , etc.

  8. 因此对传统的全FRP模壳进行了改进。

    Hence , the traditional FRP shuttering was improved .

  9. 然而用全么模阵的性质还不能得到解的表达式。

    However we still don ′ t know the expression of its solution from properties of totally unimodular matrixes .

  10. 到自身的共变函子,同时在全序模及其保序同态的范畴上得到了类似的结果。

    Meanwhile , the author gets the similar results on the category of totally ordered modules and ordered preserving homomorphisms .

  11. 这名考生用的是我们的教材,做了我们的全套模测题,最后取得了让人羡慕的好成绩。

    After using our textbooks and taking our complete simulated test , the above mentioned student achieved good score in the real test .

  12. 应用作者发展的基于全腔模模型的快速算法,本文研究过孔互连多层供电系构造的阻抗特性。

    A fast algorithm , based on the cavity-mode model , was employed for estimating the impedance of multilayer power bus stacks interconnected by vias .

  13. 刻画了2,3,5为可逆元的交换幂等可对角化环上对称矩阵模到全矩阵模的保幂等的线性映射的形式。

    We characterized maps preserving idempotent matrix from symmetric matrix modules to matrix modules over a commutative idempotence-diagonalizable ring and 2 , 3 , 5 are units .

  14. 本文的主要结果如下:1.刻画了特征不为3且2为可逆元的主理想整环上对称矩阵模到全矩阵模的保逆线性映射的形式。

    The main results obtained in this thesis are as follows : 1 . We characterized linear maps preserving inverses of matrices from symmetric matrix modules onto matrix modules over a principal ideal domain of characteristic not 3 and suppose 2 is a unit . 2 .

  15. 激光系统采用LD泵浦全固态锁模调Q的Nd:YAG激光器为种子源,后接掺镱双包层光纤放大器进行功率放大。

    LD-pumped mode-locked and Q-switched Nd : YAG laser was employed as seed source and Yb-doped double-clad optical fiber was employed as pulse power amplifier .

  16. 从一维缺陷光子晶体的缺陷模的本征方程入手,得到了含左手材料一维缺陷光子晶体TE波的全方向缺陷模。

    Firstly , we get the omnidirectional defect mode for TE wave from the one-dimensional defective PC containing left-hand materials by the use of the eigenfrequency equation of the defect mode .

  17. 以VLF传播全波波导模理论为基础,导出了VLF传播相速日变化模式函数和相位预测函数的回归方程。

    Base on the wave-guide model theory of VLF propagation , the timing pattern of VLF phase velocity and the regression function of VLF phase prediction are established .

  18. IMD技术推广部:专门从事IMD/IML模内装饰镶嵌注塑技术的研究,提供全套IMD/IML模内装饰镶嵌注塑技术;

    IMD Technology Promotion Office : specializing in the IMD / IML injection mold decorative inlay technology research and provide a full range of IMD / IML injection mold decorative inlay technique ;

  19. 首次在国内系统报道了以腔内LBO倍频Nd∶YVO4激光器为泵浦源的全固化自锁模飞秒钛宝石激光器的实验结果。

    All solid state self mode locked fs Ti ∶ Sapphire oscillator pumped by Nd ∶ YVO 4 laser with intracavity LBO frequency doubling is reported systematically . To our knowledge , it is first time inside our country .

  20. 关于全不变子模的两个定理的推广

    On Generalizations of Two Theorms Concerning Fully Invariant Submodules

  21. 对单线铁路隧道全环整体模筑衬砌台车和施工工艺进行了研究。

    The platform and the construction technology for full-circular monolithic lining are studied .

  22. 全主动锁模激光器&预激光锁模激光器

    An actively mode-locked laser & prelasing mode-loked laser

  23. 全自动换模在大型冲压自动化线上的研究与应用

    Research and Application of the fully automatic die-changing system in Press Automation Production Lines

  24. 全等于0模除11

    is congruent to zero mod eleven

  25. 全固化自锁模飞秒激光器实验研究

    All-solid-state Self-mode-locking Femtosecond Lasers

  26. 通过将电介质材料一维缺陷光子晶体与磁介质材料一维缺陷光子晶体组合形成的光子晶体异质结构,得到了与偏振无关的全方向缺陷模。

    By combining dielectric one-dimensional defective PC and magnetic one-dimensional defective PC , we get the polarization-independent and omnidirectional defect mode .

  27. 调制器工作于金属包覆波导的衰减全反射导模吸收峰,利用电光材料的折射率对导模吸收的影响来实现电光调制。

    This modulator works based on the guided-wave absorbent peak , whose depth is influenced by the dielectric coefficient of polarized polymer .

  28. 研究了一种基于左手材料光子晶体异质结构的全方向缺陷模。

    A type of photonic heterostructure containing left-hand materials is studied , from which the polarization-independent and omnidirectional defect mode can be obtained .

  29. 该方法与全波傅里叶模值检测方法相比,不仅可将短路故障与电动机起动、过载正确区分开,而且还可超高速地检测出短路故障。

    Compared with the Full-wave Fourier Module method , this approach can distinguish the different types of fault and detect the fault quickly .

  30. 描述一种全主动锁模激光器,它采用预激光锁模技术,脉冲宽度从300ps到1500ps连续可调,脉宽稳定性为±5%。

    An actively mode-locked laser adopting prelasing technology is described . Its pulsewidth stability is + 5 % and can be adjusted from 300 ps to 1500 ps.