喷墨打印

  • 网络ink jet printing;Inkjet Printing;ink-jet printing;Inkjet;ink-jet
喷墨打印喷墨打印
  1. 喷墨打印PVC证卡涂层研究

    Research on the Coating of Ink Jet Printing PVC Card

  2. 彩色(涂布)喷墨打印纸及其质量影响因素

    Color Ink Jet Printing Paper and its Effect Factor on Quality

  3. RC高光泽喷墨打印照片纸吸墨涂层的研究

    A Study on the Ink-receptive Coating of RC High Glossy Inkjet Photographic Paper

  4. Sol-Gel法制备连续式喷墨打印用彩色陶瓷墨水的理化性能

    Physicochemical properties of coloured ceramic ink used for continuous ink-jet printing by sol-gel method

  5. 不同PVA对涂布彩色喷墨打印性能的影响

    Influence of Pigments and Binders on the Ink-jet Printing Performances of Coated Paper

  6. 文章概述了用于PCB蚀刻线路中数字喷墨打印技术的原理和优点。

    The paper describes that the principLe and advantage of Digital inkjet printing for etching circuits of PCB .

  7. 以纳米二氧化硅为颜料,PVA为胶粘剂,添加阳离子助剂,制备了数码彩色喷墨打印纸专用涂料。

    The coatings for digital color ink-jet printing paper were prepared using nanometer SiO_2 and PVA as pigment and binder .

  8. 喷墨打印制备的SnO2薄膜的气敏特性

    Gas sensing properties of SnO_2 films prepared by ink-jet printing technique

  9. 优质喷墨打印纸具有吸收墨水快速,染料固着良好,以及毛边羽化和Z向渗透少的特点。

    A high quality ink-jet printing paper shows rapid drying , good dye fixation , minimal wicking / feathering and little Z direction penetration .

  10. 喷墨打印次数对SnO2气敏薄膜性能的影响

    The properties of SnO_2 gas-sensing films prepared by different ink-jet printing times

  11. 陶瓷喷墨打印成型技术是一种把计算机辅助制造(CAM)应用于陶瓷成型中的新技术。

    The ceramic forming technology by ink jet printing is a new technology of which the computer aided manufacture ( CAM ) is used in ceramic forming .

  12. DMS公司从事于喷墨打印系统和补给品的设计、开发、制造与销售。

    DMS is engaged in the design , development , manufacture and sale of ink jet printing systems and supplies .

  13. 探讨了SiO2、PVA、固色剂、辅助胶黏剂和润滑剂等对彩色喷墨打印纸涂料流变性能的影响。

    The effect of SiO_2 , mordant , PVA ( polyvinyl alcohol ) and lubricant on rheological properties of the coating for color ink jet paper was discussed .

  14. 概述了综合运用薄膜线路技术、喷墨打印技术和激光钻孔技术以及采用常规技术制作LTCC基板的简要工艺。

    Technics of LTCC MLB processing using thin film circuit technology , ink-jet printing , laser drilling , and conventional manufacturing methods is introduced .

  15. 作者通过将扫描电镜(SEM)和能量扩散能谱(EDS)联合应用,对商品化的一种彩色喷墨打印纸的涂层结构和涂料组分进行了分析;

    In this study , the analysis of coating structure and coating components of a commercial ink jet paper was discussed through scanning electronic microscopy ( SEM ) combined with energy diffusion spectrum ( EDS );

  16. 喷墨打印法也已被尝试制备可与CMOS集成的FeRAM,具有低成本、低温的工艺优势,但打印法尚无法进行纳米尺度的加工。

    Ink jet printing is also applied to fabricate FeRAM integrated with CMOS under low temperature with low cost , but it is incapable of nanoscale process .

  17. 根据图像分析法认为:对于施胶纸,是否加填以及填料种类对喷墨打印质量有较大的影响,且添加AKD有利于提高喷墨打印的质量。

    The effect of the dosage of sizing agent AKD on the basic performance of ink jet printing paper and printing quality was analyzed with the image analysis method .

  18. 如同HP-35计算器彻底代替了手工计算尺,喷墨打印技术终结了吵闹的点阵列打印机。

    Just as the HP-35 calculator replaced the manual slide rule forever , inkjet technology spelled the end for the noisy dot-matrix printer .

  19. 通过实验和工厂案例说明STARCOTE分散体改善了纸张的抗水性、喷墨打印适性及色料附着性。

    And through the laboratory experiment and commercial use , the improvement of water-resistance , ink-jet printability and toner adhesion of paper by the STARCOTE ( r ) dispersion was introduced .

  20. 在该体系中制备出适合陶瓷装饰用彩色喷墨打印用的Fe2O3红色陶瓷墨水。

    The best composition was obtained with 20.7 % emulsion , 5.2 % hexanol , 63.7 % cyclohexane and 10.4 % FeCl 3 in mass . The system was applied to prepare Fe 2O 3 ceramic ink suitable for colorful ink jet-printing technology in the ceramics decoration .

  21. 通用型喷墨打印用墨水的研制

    A study of the development of jet ink for universal use

  22. 数码彩色喷墨打印纸用涂料的研究进展

    Progress in Study of Coatings for Digital Color Ink-jet Printing Paper

  23. 用于色谱数据处理机的喷墨打印/绘图仪

    A Jet Printer / Graph Plotter for the Chromatographic Data Processor

  24. 无光泽彩色喷墨打印纸性能的研究

    Study on the Performances of Matte Coated Paper for Ink-jet Printing

  25. 聚二烯丙基二甲基氯化铵的合成及其在喷墨打印纸中的应用

    Synthesis and Application in Ink-jet Paper of PolyDimethyl Diallyl Ammonium Chloride

  26. 用耐光档案墨喷墨打印耐久性强的单色照片

    Making High Durability Monochrome Inkjet Print with Light Resistant Archival Ink

  27. 纸张喷墨打印质量检测系统的建立和研究

    An Automatic Measuring System for the Printing Quality of Ink-Jet Paper

  28. 怎样延长喷墨打印数字照片的保存时间

    Method to Extend the Keeping Duration of Inkjet Printing Digital Photos

  29. 高光喷墨打印纸涂料的涂层结构与打印质量

    Structure of Coatings for Gloss Ink-Jet Printing Paper and Printing Quality

  30. 聚合物发光材料喷墨打印成膜技术研究进展

    Progress in Film Fabrication of Electroluminescent Polymers by Ink-Jet Printing Technology