回油管

  • 网络return pipe;Oil Return Pipe;Oil Return Line;return tube
回油管回油管
  1. 拆下机油滤清器控制壳上的机油回油管。

    Release the oil return line on the oil-filter console .

  2. 拆卸和安装机油回油管。

    Removing and installing oil return line .

  3. 回油管,吹气[清理]管一根试管插入了病人的气管。

    Scavenge pipe A tube was introduced into the patient 's windpipe .

  4. 将回油管插入连接件并对齐。

    Insert the lines into the connections and align them .

  5. 从车身上的管路保持架上松开燃油回油管。

    Unclip fuel return line from the line holder on the body .

  6. 汽车发动机增压器回油管失效分析及工艺改进

    Failure Analysis and Technical Improvement of Engine Turbocharger Oil Drain Bellows Pipe

  7. 更换燃油回油管连接的o形环。

    Replace the O-ring for the fuel return connection .

  8. 然后让另一人安装回油管的密封圈。

    Then get the other person to fit the grommet for the return line .

  9. 将机油回油管的联管螺母放置在燃油箱上并将其拧紧。

    Position union nut for oil return line on the fuel tank and tighten it .

  10. 清洗管子和管道用刷回油管,吹气[清理]管

    Brush for cleaning tubes and piping

  11. 所述装配箱底部通过回油管与涂料箱连通。

    The bottom of the gear box is communicated with the painting box via a paining pipe .

  12. 底座上设置与回油管另一端相连接的回油口;

    An oil returning hole connected with the other end of the oil returning pipe is arranged on the base .

  13. 小心将机油回油管上部连接到机油回油管下部。

    Carefully attach the upper part of the oil return line to the lower part of the oil return line .

  14. 检查召回车辆,更换经技术改进的燃油回油管和燃油管路,以作为一项预防措施。

    As a precaution , the fuel return hose and fuel line of the affected vehicles will be exchanged with a technically modified version .

  15. 该总成结构简单,装配方便,泄漏点少,回油管的可靠性高,而且制造成本低。

    The assembly has the advantages of simple structure , easy installation , little leakage , high reliability of the returning oil pipe and low manufacturing cost .

  16. 通过对GK1G系列调车内燃机车机油稀释原因的分析,发现主要是由于机车怠速时间长、喷油器雾化质量差及回油管漏油、输油泵密封不良等因素造成。

    The main reasons of GK 1G Series diesel shunting locomotive lubricating oil dilution were found to be long locomotive idling time , return pipe leakage , poor injector atomization quality and delivery pump seal .

  17. 第三,分析研究了管路对液压系统品质的影响,对高、低压力油管以及回油管进行了优化设计,得到了一组优化后的管路设计结果。

    Thirdly , analyzed and researched how the pipelines influent the qualities of the hydraulic system , and optimized the high and low pressure pipelines and the return pipelines , got a group of optimization pipelines size .