涡轮增压器

采用可变几何涡轮增压器（VGT）是改善增压柴油机低工况的有效方法。

The variable geometry turbocharger ( VGT ) is used to improve the performance of high pressure-ratio diesel engine , particularly at low load .

双舌形挡板变截面涡轮增压器与柴油机的匹配试验

Match Test between Double Tongue - Boards Turbocharger and Diesel Engine

基于PWM方式的变几何涡轮增压器可调喷嘴气动执行机构

Pneumatic Actuating Mechanism for Variable Nozzle of VGT Based on PWM

涡轮增压器CAD研究

CAD study on Turbocharger

涡轮增压器主要零部件的模态计算及压气机CFD分析

The Mode Analysis of Turbo-charger ' Blades and CFD Analysis of Compresser

涡轮增压器监控系统与PIC单片机的串行通讯

Serial Communication for Turbocharger Monitor System to PIC Electronic Control Unit

本文用A、B、C、D四种涡轮增压器和X、Y两种喷油泵与480QZ型柴油机进行了匹配试验研究。

The experimental investigation on matching four kinds of turbocharger and two types of fuel injection pump to a turbocharged diesel engine has been carried out .

基于FTA方法降低涡轮增压器失效风险

Eliminating the risk of turbocharger 's failure based on FTA

阐述了TiAl基合金在汽车排气门和涡轮增压器上的应用情况。

Application of TiAl-base alloy in exhaust valves and turbochargers are dictated .

基于PIC单片机的变喷嘴涡轮增压器电控系统设计

Development of New Variable Nozzle Turbocharger Electronic Control System Based on PIC Microprocessor

应用有限元分析软件ANSYS，对涡轮增压器轴摩擦焊区域进行了强度分析。

An intensity analysis was carried out to the friction weld area of turbocharger shaft with ANSYS finite element analysis software .

KY公司是一家专营涡轮增压器的民营企业。

KY Corporation is one civilian-run enterprise which monopolizes turbochargers .

VTR废气涡轮增压器涡壳漏水的原因及其对策分析

Causes of Shell Leakage in VTR Exhaust-driven Turbocharger and Countermeasures

然后探讨了利用AVLboost软件对涡轮增压器进行计算和选型的方法，并通过初步的计算选出了合适的压气机。

Then discussed the method of computation and choice to turbocharger by AVL BOOST , and had selected the appropriate compressor for this engine .

这是霍尔塞特公司和无锡动力工程有限公司的一个合资企业。霍尔塞特无锡公司的MR涡轮增压器在中国市场占有领先地位，有很大的客户群，其中包括了中国主要的卡车制造商。

This is a joint venture between HOlset Turbochargers and Wuxi Power Engineering Co. Ltd. Wuxi Holset enjoys a leading position in MR turbos in the Chinese turbocharger market and serve an extensive customer base including leading Chinese truck manufacturers .

如果XCache和XDebug是涡轮增压器，那么memcached就是喷气发动机。

If XCache and XDebug are turbochargers , memcached is a jet engine .

可变几何废气涡轮增压器（VGT）的控制系统研究

Study on Control System for Variable Geometry Turbocharger

提出了高压共轨柴油机增压调节（PCR）系统控制策略的开发，采用先进的可变截面涡轮增压器作为系统开发的执行器。

The pressure charging regulation ( PCR ) system of high-pressure common-rail diesel engine was used as object for control strategy , advanced variable geometry turbocharger ( VGT ) was selected as actuator of system development .

实验结果表明，以现有涡轮增压器产品充当涡轮制冷器时，在货车发动机常用工况下，空调装置可提供低于环境温度6℃的冷气；Air（初三适用）

The test results indicate that , when now available turbine superchargers are used as turbine refrigerators , the new air-conditioning device can provide conditioned air with the temperature being 6 ℃ less than the environmental temperature as the truck engine operates in normal condition .

本文简要介绍美国热力学系统（TMS）公司开发的三级涡轮增压器系统的设计、高空模拟试验和飞行试验等。

The paper presents briefly the designing , high altitude simulating test and flying test of three-level turbocompressor system developed by America TMS company .

可变截面涡轮增压器（VGT）从根本上改变了传统涡轮增压器的性能，是迄今为止最为理想的涡轮增压器。

The variable geometry turbo-compressor ( VGT ) changes performance of the traditional types turbo-compressor radically . It is the best turbo-compressor so far .

H1C型涡轮增压器存在着严重的转子碰磨故障。

There is serious fault from rotor rubbing in H1C turbocharger .

261P涡轮增压器叶片枞树形榫齿深磨试验研究

Creep-Feed Grinding Experiment in Propeller Blade Fir-Shape Tenon of 261P Turbosupercharger

可变喷嘴涡轮增压器（VNT）作为VGT的一种主要型式是通过改变喷嘴环流通截面积的大小而实现增压器与柴油机的匹配。

Variable Nozzle Turbocharger ( VNT ) is the chief type of VGT and it can match with the diesel engine by rotating its nozzle pivots .

介绍了涡轮增压器与L360空对空增压中冷柴油机的优化匹配研究过程。

This paper describes optimized matching research of turbocharger & L360 engine with air-to-air aftercooler .

经测试，TiAl基合金排气门及涡轮增压器转子的各项性能优良，表明TiAl基合金可成为未来高性能汽车发动机排气门和涡轮增压器转子的首选材料。

It is shown by tests that all performances of TiAl-base alloy exhaust valves and turbocharger rotators are fine , which indicates that TiAl-base alloy will be the preferred material for exhaust valves and turbocharger rotators of the future high performance automotives .

VNT通过调节废气涡轮增压器涡前压气后的压差，可将EGR率提高2%~12%。

The EGR rate could be increased by 2 % ~ 12 % through regulating the difference between the gas pressure before the VNT and the air pressure after the VNT by means of VNT adjustment .

进行了可变喷嘴涡轮增压器与WD615柴油机的匹配试验，并将匹配结果与原机进行了试验比较；

The matching experiment for WD615 diesel engine with VNT was also carried out , and the results were compared with those with constant geometry turbocharger .

利用Pro/E软件建立GJ-90型可变几何涡轮增压器（VGT）可调叶片和支撑盘的几何模型，并借助有限元分析软件ANSYS对其进行温度场分析及热变形计算。

The geometrical models of the GJ-90 style variable geometry turbocharger ( VGT ) 's regulating vane and supporting plate were built with Pro / E. The temperature fields and the transfigurations of the parts were calculated with ANSYS .

介绍了氮化硅陶瓷以及碳纤维强化树脂在涡轮增压器上的应用，并且叙述了陶瓷材料的成形技术、烧结技术、与金属的结合技术以及新开发的碳纤维强化树脂PKU的特性等。

The application of silicon-nitride ceramic and carbon fibre reinforced resin to turbo-charger is introduced . The forming technology , sintering technology and binding metal technology of ceramic materials and the characteristics of new developed carbon reinforced resin PKU , etc. are described .