热塑性聚氨酯

分别采用醚型和酯型热塑性聚氨酯（TPU）对聚对苯二甲酸丁二醇酯（PBT）进行增韧改性，并对共混物的性能、形态结构及流变性能进行了研究。

PBT was toughening modified with the different types of TPU , and the mechanical properties , morphology and rheological properties of the modified PBT were studied .

受阻胺/热塑性聚氨酯复合材料的结构与性能研究

Study on structure and properties of hindered amine / TPU composites

热塑性聚氨酯弹性体主要由含OH的低聚物多元醇、小分子扩链剂和异氰酸酯等原料聚合而成。

Thermoplastic polyurethane elastomers are prepared with polyol ester containing OH , isocyanate and a chain extender .

我国热塑性聚氨酯弹性体（TPU）应用及市场

Application and Market of Thermoplastic Polyurethane Elastomers in China

短Kevlar纤维增强的热塑性聚氨酯弹性体

Thermoplastic polyurethane elastomers reinforcing with short Kevlar fibre

采用机械共混法制备了热塑性聚氨酯（TPU）与聚氯乙烯（PVC）共混物。

Blends of thermoplastic polyurethane ( TPU ) and poly ( vinyl chloride ) ( PVC ) were prepared via mechanical blending .

研究了热塑性聚氨酯（TPU）与丙烯腈-丁二烯-苯乙烯共聚物（ABS）共混对ABS结构和性能的影响。

This paper studied the influence of blending ABS with thermoplastic polyurethane ( TPU ) on the structure and properties of ABS resins .

本文对聚丙烯（PP）与热塑性聚氨酯（PU）共混体系的相容性、分散相的形态、熔体的流变性质、共混物的热性质及初生纤维的染色性等作了初步的研究。

In this paper a preliminary work in respect to the compatibility , dispersed phase morphology , rheological property , thermal property and dyeing ability has been performed .

着重讨论了合成方法、反应温度、软段和硬段的组成结构、弹性树脂R值及熟化条件等因素对热塑性聚氨酯弹性树脂性能的影响。

The influences of synthetic method , reaction temperature , soft and hard segment composite structure , elastomer R value and curing condition etc. on the property of thermoplastic elastic urethane resin were emphatically discussed .

采用物理共混的方法，制备了廉价的BR和贵的热塑性聚氨酯（TPU）共混物。

By physical blending , the blends of cheap cis polybutadiene rubber and expensive thermoplastic polyurethane ( TPU ) are prepared .

本文研究了改性热塑性聚氨酯（TPU）的制备、表征以及在胶黏剂中的应用。

In this study , the preparation , characterization and adhesive application of modified thermoplastic polyurethane ( TPU ) were researched .

用一步法在密炼机中合成了热塑性聚氨酯（TPU），并对其热处理前后的性能作了比较。

The thermoplastic polyurethane ( TPU ) is prepared with mixer by one step , and it 's properties is compared after heating .

在系统中，以一步法和预聚法为对照，研究了半预聚法对医用热塑性聚氨酯（TPU）结构和性能影响。

Medical thermoplastic polyether urethanes ( TPU ) based on MDI / PTMG / BDO system were prepared by one-shot , prepolymer and semi-prepolymer processes with equivalent stoichiometries respectively .

热塑性聚氨酯（TPU）薄膜是塑料薄膜中的新产品。

Thermoplastic polyurethane ( TPU ) membrane is a new type of the plastic films , and it is available to meet specific application that unavailable in other thermoplastics .

用低熔点聚酯对热塑性聚氨酯进行改性，并对所制备的复合薄膜进行热粘合强度、DSC、透湿性、耐静水压以及力学等各项性能测试。

Films for lamination were prepared via a melt blending of thermoplastic polyurethane ( TPU ) and polyester with low melt point , and their moisture permeability , thermal bonding properties , resistance to hydrostatic pressure and mechanical properties were tested .

利用共挤出流延机组制备热塑性聚氨酯/尼龙6/热塑性聚氨酯（PUR-T/PA6/PUR-T）复合膜，采用原子力显微镜用多层膜方法研究PUR-T与PA6的相容性。

The PUR-T / PA6 / PUR-T multilayer films were prepared by co-extrusion casting machine . The compatibility between PUR-T and PA6 was studied by means of AFM and DSC methods .

热塑性聚氨酯（TPU）具有优良的综合性能，如高强度、高弹性、高耐磨、减震能力强以及可回收利用等，是一种理想的运动防护材料。

Thermoplastic polyurethane ( TPU ) has excellent properties , such as high strength , comprehensive strength , elasticity , wear resistance , vibration damping ability and easy to recycle , these properties make it ideal for sportsmen protection material .

热塑性聚氨酯（TPU）是一类用途广泛的弹性嵌段共聚物，由软段和硬段组成，具有较高的延展性和易加工性，但是其耐热性较差，强度不高。

Thermoplastic polyurethane ( TPU ), an elastomeric block copolymer , is composed of hard segments and soft segments that combine to give the TPU moderate stiffness , high rubber-like extensibility and easy processability . However , the weak heat resistance and relative low modulus of TPU limits its application .

将2种乙烯-醋酸乙烯酯共聚物（EVM400，EVM700）和2种热塑性聚氨酯弹性体（聚酯型TPU385E和聚醚型TPU8685）按不同并用比进行交叉共混，考察了共混体系的耐油性能。

The oil resistance of the blend was investigated by cross-blending two kinds of EVM ( ethylene-vinyl acetate copolymer with different VA content ) and two kinds of thermoplastic PU elastomer ( TPU )( polyester and polyether type ) in different rates .

IPDI/PPG型热塑性聚氨酯的合成及红外光谱研究

Synthesis and FTIR study of IPDI / PPG Type Thermoplastic Polyurethane

橡塑低压输水管的研制热塑性聚氨酯的合成塑料管材的分级问题

Manufacture of Thermoplastic Elastomers / Plastics Low Pressure Water Transportation Pipes

异佛尔酮二异氰酸酯基热塑性聚氨酯氢键体系的研究

Study of hydrogen bonding in thermoplastic polyurethane based on isophorone diisocyanate

添加剂对热塑性聚氨酯熔体加工与流变性能的影响

Effects of Additives on the Rheological Property of Thermoplastic Polyurethane Melts

玻璃短纤维-热塑性聚氨酯复合材料的性能研究

Study on Properties of Glass Short Fibre / Thermoplastic PU Composite

聚酯型热塑性聚氨酯弹性体的制备及阻尼性能

The Synthesis and the Damping Property of Polyester-Based Thermoplastic Polyurethanes Elastomer

热塑性聚氨酯对尼龙6结晶行为的影响

Effect of TPU on the Crystallization Behavior of polyster-TPU / PA6

热塑性聚氨酯与聚氯乙烯共混研究

Study on the Modification of Thermoplastic Polyurethane and Polyvinyl Chloride Blends

弹性聚四氟乙烯/热塑性聚氨酯多微孔薄膜的研制

Preparation of PTFE / TPU Microporous Membranes with Rebound Elasticity

聚甲醛/热塑性聚氨酯弹性体共混增韧的研究

Study on Toughening Polyoxymethylene by Blending with Thermoplastic Polyurethane Elastomers

合成方法对医用热塑性聚氨酯结构和性能影响的研究

Effect of Polymerization Method on Structure Property of Medical Thermoplastic Polyether Urethane