热模拟试验机

HRM焊接热模拟试验机的程序控制系统

The Programed Control System of the Thermal Simulator HRM for Welding Research

利用Gleeble-1500热模拟试验机对试验钢进行了热模拟轧制。

The experimental steels were hot-rolled by Gleeble-1500 hot-simulated testing machine .

在Gleeble1500热模拟试验机上进行了不同加热温度对Nb的质量分数为0.015%的钢和不含Nb钢奥氏体晶粒尺寸的影响试验。

The effects of heating temperature on austenite grain size of 0.015 % Nb steel and Nb free steel were investigated by Gleeble 1500 thermomechanical simulator .

本文采用高硅4032铝合金材料，利用Gleeble-1500热模拟试验机，进行了高温压缩试验。

Isothermal compression tests of 4032 aluminum alloy were performed on Gleeble-1500 thermal simulator .

GLEEBLE材料热模拟试验机高温压缩试验的数据整理与修正

The collating and correcting of data in hot compressing test for Gleeble material hot modeling test machine

用Gleeble2000热模拟试验机对82B钢奥氏体再结晶进行了研究。

The austenite recrystallization behaviors of 82B high carbon steel were investigated by Gleeble 2000 thermal-mechanical simulator .

Gleeble-2000型热模拟试验机液压楔故障的诊断和处理

Trouble Diagnosis and Handling of Hydraulic Wedge for Gleeble-2000 Thermal Analogue

借助Gleeble2000热模拟试验机和TEM对Zr，Zr+Ti处理试验钢焊接粗晶区中针状铁素体的形核进行了观察。

This paper observes the acicular ferrite ( AF ) formation in the welded coarse grain heat affected zone of the Zr and Zr + Ti doped steels by Gleeble 2000 simulated machine and transmission electron microscopy .

在Gleeble1500热模拟试验机上进行SiCp/2024Al泡沫复合材料的准静态压缩试验，阐述孔的结构和SiC颗粒含量对材料准静态压缩性能的影响规律。

Quasi-static compression experiments of SiCp / 2024Al composite foams were tested on Gleeble 1500 thermal simulation testing machine , the situation that the quasi-static compression properties were influenced by the structure of pore and the volume fraction of SiC particles were analyzed .

在热模拟试验机试验的基础上建立了Nb-Ti微合金钢加热过程中组织变化的数学模型。

A mathematic model to predict the microstructure of Nb-Ti micro-alloyed slab in the heating process of hot rolling was developed based on thermo-mechanical simulation tests .

借助Gleeble-2000热模拟试验机对钢轨焊接挤压变形过程进行了模拟实验。

Tests of the upsetting deformation process for rail welding are done on the Gleeble-2000 simulation machine .

以Gleeble1500热模拟试验机得到的实验数据为基础，根据BP人工神经网络算法原理，建立了1420AlLi合金高温塑性变形稳态流变应力与应变速率和变形温度对应关系的预测模型。

On the basis of the data obtained on Gleeble-1500 Thermal Simulator , the predicting models for the relation between stable flow stress during high temperature plastic deformation and deformation strain , strain rate and temperature for 1420 Al-Li alloy have been developed with BP Artificial Neural Network method .

在热模拟试验机上采用膨胀法并结合金相组织观察，测定了含钼和不含钼的试验钢贝氏体转变CCT曲线。

The CCT curve of the bainite transformation of the Mo bearing and Mo free trial steel has been measured and the metallographic structure of the steels observed by expansion method in a thermo-simulation machine .

采用Gleeble-1500热模拟试验机，对Ni-Mo-Cr-Al电阻合金进行高温压缩实验。

Compressive deformation hot simulation test of Ni-based electric resistance alloy ( Ni-Mo-Cr-Al ) was performed by Gleeble-1500 hot simulator .

在Gleeble-2000动态热模拟试验机上采用凝固法研究了高碳钢的高温力学性能。

This paper studies the high temperature mechanical properties of high carbon steel by solidifying method on Gleeble-2000 experiment machine .

在Gleeble-1500热模拟试验机上采用圆柱试样压缩的方法，研究了微合金高强度低碳贝氏体钢在不同变形条件下变形抗力的变化规律。

By compressing cylinder samples in Gleeble-1500 thermal analog test machine , the change rules of the deformation resistance of micro-alloy low-carbon bainitic steel under different deformation conditions are studied .

采用热模拟试验机、拉伸试验机以及光学显微镜等设备，根据CCT曲线和拉伸实验的结果，研究了冷却速度对700MPa级超级钢组织和性能的影响。

With hot simulator , tensile tester and optical microscope , the influence of cooling rate on the microstructure and mechanical properties of 700 MPa HSLA steels was studied .

采用Gleeble-1500D热模拟试验机，利用电场作用直接激发Fe-V-C三元粉末共混体系，成功地实现了Fe/VC复合材料在低温下快速合成，并研究了该体系在电场作用下的燃烧行为。

Using Gleeble-1500D thermal simulation instruments , reactions were activated directly by electric field in Fe-V-C system and the combustion behavor of the system was studied .

采用Gleeble-2000热模拟试验机，对高速铁路轨道用U71Mn钢轨钢的对焊顶锻变形过程进行了热力模拟试验。

The upset formation process of rail ( U71Mn ) butt welding was test by thermal and mechanical simulation using Gleeble-2000 simulator .

采用Gleeble-1500热模拟试验机测量了高碳钢连铸板坯的高温力学性能，得到了第Ⅰ、第Ⅲ脆性温度区的温度范围。

High temperature properties of continuous casting high carbon steels were measured by tensile tests with a Gleeble 1500 system and two embrittlement temperature regions of region I and region III were found .

介绍了Gleeble-3800热模拟试验机运行一年来陆续出现的一些故障及对故障的排查过程和解决方法。

Gleeble-3800 thermal simulate machine runs since a year , and it appears some troubles in succession . This article introduces some method of detecting and solving .

采用Gleeble-1500热模拟试验机，测定了3种铝合金材料在高温下的流动应力，分析了应变速率、变形程度和变形温度对流动应力的影响。

Through a Gleeble-1500 simulator , the flowing stress curves of three aluminum alloys were experimentally determined at high temperatures at a constant speed with the effects of deforming temperatures , deforming speed and deforming degree .

在Gleeble-1500D热模拟试验机上进行高温高应变速率热压缩变形试验，研究了7475铝合金在340℃～420℃温度范围及0.1～10s-1应变速率范围内的流变应力变化规律。

The flow stress of 7475 Al alloy under high temperature and high strain rate compression deformation has been studied with Gleeble-1500D machine with deformation temperature and strain rate range of 340 to 420 ℃ and 0.1 to 10s-1 respectively .

利用MMS-200热模拟试验机进行单道次压缩实验，绘出了无取向硅钢W20和W30的应力-应变曲线，分析了变形温度、变形速度和变形程度对变形抗力的影响规律。

Base on single pass reduction experiment carried out by MMS-200 thermal-mechanical simulator , the curves of stress-strain have been drew and We also analyzed the influence of the effect of deformation temperature 、 strain rate and strain on deformation resistance .

采用Gleeble-1500热模拟试验机上对B72LX、B82LX钢进行变形温度为850℃~1050℃应变速率为0.1~101/s的压缩变形试验，研究了这两个钢种的再结晶规律。

The compression deformation test at the temperatures between 850 ℃ and 1 050 ℃ with strain rate 0.1 ~ 10 1 / s of steel B72LX 、 B82LX has been carried out using the Gleeble-1500 thermal simulation machine to study the dynamic recrystallization behavior of the steel .

在热模拟试验机上研究了控轧控冷工艺对微合金化低碳贝氏体型非调质钢组织性能的影响，并探讨了贝氏体转变机制问题。

The effect of TMCP parameters on microstructure and property was studied , and a controversial question about bainite transformation mechanism also was discussed .

在Gleeble1500热模拟试验机上，采用高温等温压缩试验，对7075铝合金在高温压缩变形中的流变应力行为进行了研究。

The flow stress behavior of 7075 aluminum alloy during hot compression deformation was studied by isothermal compression test at Gleeble 1500 thermal mechanical simulator .

采用Gleeble1500热模拟试验机研究了变形温度、冷却速度对塑料模具718钢显微组织和硬度的影响。

The dependence of microstructure of plastic die 718 steel upon cooling rate and deformation temperature was investigated using a Gleeble 1500 thermomechanical test system .

在Gleeble1500热模拟试验机上模拟了连续热镀锌的张力退火过程，研究了张力大小对退火后IF钢力学性能的影响。

Effect of annealing tension on the properties of hot dip galvanized IF steel was investigated by simulating the annealing process with Gleeble 1500 thermal simulator .

通过Gleeble2000和1500热模拟试验机，研究了0·75C共析钢珠光体和过冷奥氏体在压缩变形过程中的组织演变。

The structure evolution of pearlite and overcooling austenite of 0.75C eutectoid carbon steel during compression has been studied by Gleeble 2000 and 1500 thermal simulation machines .