甲基丙烯酸缩水甘油酯

甲基丙烯酸缩水甘油酯/苯乙烯固相接枝聚丙烯的表征

Characterization of Polypropylene Grafted with GMA and Styrene by Solid - phase Reaction

运用BP神经网络对交联单体三乙二醇二丙烯酸酯、甲基丙烯酸缩水甘油酯、十一烯酸用量与交联度的关系进行了分析。

The BP neural network was employed to analyze the relationship between the crosslinking monomers and crosslinking degree .

HDPE膜电子束引发预辐照接枝甲基丙烯酸缩水甘油酯的研究

Study on grafting glycidyl methacrylate onto HDPE membranes by pre-irradiation graft copolymerization

右旋糖酐-甲基丙烯酸缩水甘油酯载BMP2凝胶微球的制备与评价

Preparation and Evaluation of BMP_2 Carrying Gel Microspheres by Dextran-glycidyl Methacrylate

在聚丙烯（PP）中加入10%～40%质量份数的聚对苯二甲酸乙二脂（PET）、反应增容剂三元乙丙橡胶接枝甲基丙烯酸缩水甘油酯（EPDM-g-GMA）及成核剂对PP进行共混改性。

Polypropylene is modified by reactive blending with PET ( 10 % ~ 40 % Wt ), reactive compatibilizer EPDM-g-GMA and nucleating agent .

通过羧基型聚酯和甲基丙烯酸缩水甘油酯（GMA）反应合成了紫外光（UV）固化粉末涂料用聚酯丙烯酸酯树脂。

The polyester acrylate resin for UV-curable powder coatings is synthesized through the reaction of carboxyl-type polyester and glycidyl methacrylate ( GMA ) .

聚四氟乙烯（PTFE）膜经Ar低温等离子体预处理，无光引发剂紫外光照接枝甲基丙烯酸缩水甘油酯（GMA）。

PTFE films were pretreated by low-temperature Ar plasma , then subjected to UV-induced graft polymerization with glycidyl methacrylate ( GMA ) without photo-initiator .

用模压的方法制备了甲基丙烯酸缩水甘油酯（GMA）改性大豆分离蛋白质（SPI）塑料。

Glycidyl methacrylate ( GMA ) modified soy protein isolate ( SPI ) plastics were prepared via the compression molding .

介绍了甲基丙烯酸缩水甘油酯（GMA）类丙烯酸粉末罩光清漆的制法。

This article has described the preparation of glycidyl methacrylate ( GMA ) based acrylic clear powder coatings .

本工作采用SAN粉料作基材，甲基丙烯酸缩水甘油酯（GMA）作接枝单体，运用辐射接枝技术合成了相容剂C并应用于PA6/ABS合金。

S The graft copolymerization , that is the compatibilizer C , of GMA monomer onto SAN powder was synthesized by using radiation grafting technology and its application to PA6 / ABS alloy were studied .

采用悬浮聚合方法合成了苯乙烯-甲基丙烯酸缩水甘油酯（GMA）共聚物（SG），讨论了各种实验条件对聚合反应的影响。

Styrene-glycidyl methacrylate copolymer ( GMA ) was synthesized by suspension polymerization , and the effect of various experimental factors on the polymerization were also studied .

采用熔融共混法制备了PBT和甲基丙烯酸缩水甘油酯（GMA）功能化改性SBS（SBS－g－GMA）的共混物。用FTIR、WAXD、DSC、MI等方法对共混物进行了表征。

The blends of PBT and SBS functionalized with glycidyl methacrylate ( GMA ) were produced by melt blending , and characterized with methods of FTIR , WAXD , DSC and MI .

研究结果表明，PGMA@KF纤维的表面形貌和元素组成可以通过控制聚合反应中甲基丙烯酸缩水甘油酯（GMA）单体量来实现。

The results demonstrate that the morphology and element compositions of PGMA @ KF fibers can be controlled by the concentration of glycidyl methacrylate ( GMA ) used .

针对汽车用甲基丙烯酸缩水甘油酯（GMA）类丙烯酸粉末罩光清漆耐冲击性能差的问题，通过使用3种不同的增韧方法进行改进。

Three different approaches for improvement of flexibility have been developed in terms of the unsatisfied impact resistance of glycidyl methacrylate ( GMA ) based acrylic clear powder finish .

结果发现，保护胶聚丙烯酸钠（PA）能够显著提高聚合稳定性，功能性单体甲基丙烯酸缩水甘油酯（GMA）能够提高乳液的储存稳定性。

It was found that the protective agent , sodium polyacrylate ( PA ) could obviously improve the polymerization stability and the functional monomer , glycidyl methacrylate ( GMA ), could enhance the store stability .

甲基丙烯酸缩水甘油酯（GMA）是一种含环氧基的烯类单体，通过均聚合或者共聚合可以制备带有环氧基团的聚合物大分子。

Glycidyl methacrylate was a vinyl monomer having epoxy group . The polymer poly ( glycidyl methacrylate ) containing epoxy group can be prepared with glycidyl methacrylate by homopolymerization or copolymerization .

讨论了甲基丙烯酸缩水甘油酯（GMA）接枝聚丙烯（PP）的反应以及PP接枝GMA共聚物（PP-g-GMA）在PP/聚酰胺6（PA6）合金中的应用。

This paper discussed the reaction for making glycidyl methacrylate ( GMA ) grafted polypropylene ( PP ) and the application of PP - g - GMA in PP / polyamide 6 ( PA6 ) alloys .

采用乙烯-丙烯酸甲酯-甲基丙烯酸缩水甘油酯三元接枝共聚物（E-MA-GMA）与CaCO3并用对聚对苯二甲酸丁二酯（PBT）进行增韧改性。

The toughening modification of ethylene-methyl acrylate-glycidyl methacrylate terpolymer ( E-MA-GMA ) and CaCO_ ( 3 ) together on poly ( butylene terephthalate )( PBT ) was carried out .

结果表明：甲基丙烯酸缩水甘油酯（GMA）含量为15%，胺化开环量为50%，中和度为80%时，树脂的水溶性及水分散体系稳定性均良好。

The results show that water solubility and water dispersion stability are excellent when the mass fraction of GMA is 15 % , the amination ring-open is 50 % and neutralization is 80 % .

本研究以菊粉、甲基丙烯酸缩水甘油酯（GMA）、四甲基乙二胺（TMEDA）和活性染料为主要原料，通过接枝聚合制备菊粉凝胶，再经染色，制成不溶性呈色菊粉。

Insoluble chromogenic inulin gel was made through graft polymerization and staining with inulin , Glycidyl methacrylate ( GMA ) , tetramethylethylenediamine ( TMEDA ) and active dye .

目的研究影响高增塑聚氨酯（PU）/聚甲基丙烯酸缩水甘油酯（PGMA）同步互穿网络（SIN）力学性能的因素，寻求最佳力学性能配方。

Aim To study the factors affecting the mechanical properties of highly plasticized polyurethane ( PU ) / poly ( glycidyl methacrylate ) ( PGMA ) simultaneous interpenetrating network ( SIN ) and find the recipe with best mechanical properties .

对马来酸酐接枝乙烯-辛烯共聚物（POE-g-MAH）和乙烯-丙烯酸甲酯-甲基丙烯酸缩水甘油酯三元共聚物（E-MA-GMA）增韧聚对苯二甲酸丁二酯（PBT）进行了研究。

This paper studied the effectiveness of toughening poly ( butylene terephthalate ) ( PET ) with maleic anhydride grafted polyethylene-octene elastomer ( POE-g-MAH ) and ethylene-methyl acrylate-glycidyl methacrylate terpolymer ( E-MA-GMA ) .

研究了新型增容剂丙烯酸酯与甲基丙烯酸缩水甘油酯双官能化乙烯类弹性体（KY-6B）对PC/PBT合金性能及结构的影响。

The effects of novel ethylene elastomer compatibilizer containing polyacrylate and glycidyl ester ( KY-6B ) on the structure and properties of PC / PBT alloys were studied .

以AIBN作引发剂、巯基乙酸作链转移剂、甲基丙烯酸缩水甘油酯作封端剂、苄基氯化三乙胺作催化剂，合成了紫外光固化粉末涂料用的不饱和丙烯酸酯共聚物（即光敏聚合物）。

The unsaturated acrylate copolymers ( photosensitive polymers ) for UV curing powder coatings were synthesized by using AIBN as initiator , thioglycolic acid as chain transfer agent , glycidyl methacrylate as terminating agent , and benzyl triethylamine chloride as catalyst .

目的制备载人骨形态发生蛋白-2（rhBMP-2）的甲基丙烯酸缩水甘油酯右旋糖酐（dex-GMA）凝胶微球并初步考察其体外溶胀、降解、载药与释药特征。

Objective To investigate the preparation method of recombinant human bone morphogenetic protein-2 ( rhBMP-2 ) loaded dextran-based hydrogel microspheres ( BMP-HMs ) and evaluate their characteristics in swelling and biodegradation , drug loading and release .

采用2种粒径CaCO3分别与乙烯-丙烯酸甲酯-甲基丙烯酸缩水甘油酯三元共聚物（E-MA-GMA）弹性体并用，制备了PBT/E-MA-GMA/CaCO3复合材料。

Poly ( butylenes terephthalate )( PBT ) / ethylene-methacrylic acid-glycidyl methacrylate terpolymer ( E-MA-GMA ) / CaCO_3 composites were prepared by addition of two kinds of CaCO_3 fillers with different particle sizes and E-MA-GMA into PBT respectively .

为了提高PLA/LDPE/TPS共混体系的相容性，采用乙烯-X-甲基丙烯酸缩水甘油酯三元嵌段物（E-X-GMA）作为PLA/LDPE的相容剂，并添加自制的淀粉接枝丙烯酸酯（Starch-g-X）来提高淀粉的分散性。

In order to improve the PLA / LDPE / TPS blends compatibility , we used ethylene-x-glycidyl methacrylate block copolymer ( E-X-GMA ) as PLA / LDPE compatible agent , added starch graft acrylate ( Starch-g-X ) to increase the dispersion of starch .

二乙烯苯交联大孔聚甲基丙烯酸缩水甘油酯的合成及其结构性能的研究

The studies on Synthesis and properties of glycidyl methacrylate-divinylbenzene macroporous copolymers

乙烯装置裂解气压缩机级间注水技术甲基丙烯酸缩水甘油酯

Interstage water injection technology for cracking gas compressor in ethylene plant

用原子力显微镜研究甲基丙烯酸缩水甘油酯在高密度聚乙烯表面的紫外接枝

AFM Studies on UV-initiated Grafting of Glycidyl Methacrylate onto High-density Polyethylene Surface