石英片

shí yīnɡ piàn
  • quartz plate
石英片石英片
  1. 利用真空蒸发法制备ZnO薄膜,衬底材料是镜面抛光石英片。

    The ZnO films were synthesized by vacuum evaporation on mirror-polished quartz substrates .

  2. 然后采用CVD法在石英片上制备了直径较小的碳纳米管阵列。

    Then by using CVD method we prepare carbon nanotubes with smaller size on quartz .

  3. 研究了利用光刻技术在石英片上制作用于LDA光纤束耦合的V形槽阵列的工艺。

    The fabrication process of silica based V groove array with optical lithography for fiber bundle coupling of laser diode array is investigated .

  4. 正电子淹没寿命谱学法检测石英片上硬脂酸铅皂膜晶体(LS)质量

    Determine quality of laser stearate soap film crystal ( LS ) on the quartz slice by means of the positron annihilation life spectroscopy

  5. 本文用正电子湮没寿命谱学法研究石英片上LM皂膜的晶体质量。

    The quality of the LM soap film crystal is determined by means of the positron annihilation life spectroscopy .

  6. 利用层接层自组装技术,以石英片为基底,研究了前驱体薄膜层数、焙烧温度、基底预处理等因素对TiO2薄膜的结构和光催化性能的影响,并优化了TiO2薄膜制备工艺。

    The effects of pristine film number , anneal temperature , pre-treatment of substrate for structure and properties of TiO2 films prepared on quartz slide by layer-by-layer assembly method ( LBL ) were studied in detail .

  7. 最后分子的一端通过三乙氧基硅烷嫁接到石英片表面。

    Then triethoxy silane was introduced at one end of the molecule to grafted on the quartz surface .

  8. PSD在石英摆片综合参数测试系统中的应用

    Application of PSD to the Multi-Parameter Measurement System of Quartz Pendulous Reed

  9. 实验测得Mn2(CO)(10)分子在石英基片上的热解表观活化能E(?)等于26kJ/mol。

    The apparent activation energy for pyrolytic deposition of Mn_2 ( CO ) _ ( 10 ) on quartz substrate is 26 kJ / mol.

  10. 具体内容有:(1)利用射频磁控溅射在石英基片上沉积ZnO薄膜,研究氧分压对ZnO薄膜的结构和光电学性质的影响。

    The main contents include : Firstly , ZnO films with different OPP were deposited on quartz substrates by RF magnetron sputtering .

  11. 详细介绍了以PSD为传感元件的石英摆片综合参数测试系统的测量原理、光路和电路。

    The structure , measurement principles and hardware of the application system of PSD are introduced in detail .

  12. 文章主要研究了Y旋转ST石英基片上准纵漏表面声波(快速声表面波)的传播特性。

    This paper studies the propagation properties of Quasi longitudinal leaky surface acoustic wave ( QLLSAW ) on Y rotated cut ST quartz substrates .

  13. 传感器本身由压电石英基片、叉指换能器和SiO2声波导层构成。

    The Love wave devices with the substrate of ST-cut quartz , interdigital transducers ( IDTs ) and the guiding layers of SiO_2 were fabricated successfully .

  14. 利用薄膜工艺和微细加工技术,将NiFe合金或NiCo合金真空蒸镀或溅射在玻璃或石英基片上,制作的磁阻传感器具有广泛的用途。

    By use of thin-film technology and microprocessing technique Ni-Fe or Ni-Co alloy is evaporated or sputtered in vacuum onto glass or quartz substrate . Reluctive sensors made in such way have wide application .

  15. 用液相沉积法在石英基片上制备出纳米TiO2薄膜,利用分光光度计间接测量TiO2薄膜厚度,研究了超声波震荡、胶体浓度、沉积时间及沉积次数对薄膜厚度的影响;

    The thicknesses of the films are determined by a spectrophotometer . The influence factors on the thicknesses such as ultrasonic vibration , times of sedimentation , sedimentation time and concentration of TiO2 colloid are investigated .

  16. 在相同温度不同基底下,熔石英基片薄膜的折射率、损伤阈值高于K9玻璃基片薄膜,而熔石英基片薄膜的消光系数比K9玻璃基片薄膜的小得多。

    In the same temperature and different substrate , the solid silica substrate films ' refractive index and laser induce damage threshold were higher than the K9 substrate films ' .

  17. 利用射频磁控溅射在硅和石英基片上制备了Ba0.6Sr0.4TiO3(BST)薄膜。

    Ba_ ( 0.6 ) Sr_ ( 0.4 ) TiO_3 ( BST ) films have been deposited on silicon or quartz substrate using RF magnetron sputtering , and treated by furnace annealing and rapid thermal annealing .

  18. 采用离子束溅射反应沉积技术,以高纯N2为工作气体,利用在不同气压下产生的离子束轰击石墨靶,在石英基片上溅射出的碳原子与氮离子反应,沉积出a-CNx薄膜。

    Amorphous carbon nitride a-CN . x. thin films are prepared by reactive ion beam sputtering deposition method using N 2 as working gas and a graphite target .

  19. 为了在紫外波段200~350nm,窄带宽1nm的情况下实现消偏,在Lyot型消偏器的基础上,设计了一种由两块厚的石英延迟片组成的消偏器。

    In order to carrying out depolarization in UV range ( 200 ~ 350nm ) and narrow bandwidth ( 1nm ), a depolarizer consisting of two pieces of thick quartz delayers is designed on the basis of Lyot depolarizer .

  20. 溶胶-凝胶法在石英基片上制备氧化锌薄膜

    Zinc Oxide Thin Films Prepared by Sol-Gel Method on Quartz Substrates

  21. Y旋转ST-石英基片上的准纵漏表面声波

    Quasi-longitudinal leaky surface acoustic wave on Y-rotated cut ST-quartz substrates

  22. 石英摆片加工过程中若干问题的研究

    A Study on Some Techniques in Manufacturing of Quartz Reed

  23. 石英摆片综合参数测试系统

    Study of Measurement System for Quartz Reed Multiple parameters

  24. 石英绝缘片在真空弧离子源中的应用

    Quartz Insulator used in Vacuum Arc Ion Source

  25. 介绍了石英摆片加工制造过程中若干工艺问题的研究结果。

    Some research results of techniques used in manufacturing process of quartz reed are presented .

  26. 石英基片(0°,124°,γ)系列传播方向上表面声波波动模式的研究

    Surface acoustic wave modes along propagation directions in Euler angle ( 0 °, 124 °,γ) on quartz substrate

  27. 针对光刻胶熔融法中的一些不足,发展了光刻胶的最佳熔融条件,探讨了熔融光刻胶与石英基片的接触角对微透镜阵列的表面面形形成的影响。

    The influence of the best contact angle between the melting resist and substrate to the surface formation of microlens is discussed .

  28. 利用图像处理的方法识别石英晶体片缺陷,进而按照品质实现自动分选。

    The defects of quartz wafer were recognized by means of image processing , and the quartz wafer was sorted by its quality .

  29. 该倍频器基于波导腔体石英基片微带电路形式,通过引线互联分别实现肖特基二极管接地和施加外部直流偏置。

    The doubler which is based on quartz microstrip circuit integrated in waveguide cavity , uses wire bonding to implement diode grounding and apply external DC bias .

  30. 应用射频磁控溅射方法分别在抛光硅片和石英玻璃片上分层沉积了GaAs/SiO2纳米薄膜。

    GaAs / SiO_2 films were deposited on the substrates of quartz glass and silicon slices layer by layer by radio frequency ( RF ) magnetron sputtering technique .