锌合金

黄铜是铜锌合金。

Brass is an alloy of copper and zinc .

TiCp在锌合金液中均匀化过程的分析

Analysis of Uniformization Process of TiC_p in Zinc Alloy Melt

氧化铝/锌合金复合材料界面的SEM观察

SEM observation on interfaces of al / Zn Alloy Composites

介绍波长色散X射线荧光光谱仪在锌合金标准物质均匀性检验中的应用。

Application of the wavelength disperse X-ray fluorescence analysis in the homogeneity examination of the zinc alloy standard reference material is introduced .

通过两种合金的摩擦磨损对比试验，对一种特殊用途的NT铜锌合金进行了摩擦磨损特性的研究。

The friction and wear behaviors are studied .

研究表明，NT铜锌合金具有较高的耐磨性，显微组织对合金的耐磨性起到了至关重要的作用。

The results show that the Cu-Zn alloy possesses excellent tribological properties and high wear resistence .

X射线荧光光谱灰化薄样法测定锌合金中Al，Cu，Sn，Fe，Pb和Cd

X-ray fluorescence spectrometric determination of Al , Cu , Sn , Fe , Pb and Cd in zinc alloy by ashing thin film technique

ICP-MS测定铜锌合金中痕量元素

Determination of trace elements in copper-zinc alloy by ICP-MS

采用挤压铸造制备了Al2O3短纤维增强锌合金复合材料，研究了其凝固组织。

Abstract The solidifying structure of Al_2O_3 short fiber reinforced zinc alloy composite manufactured by squeeze casting has been studied .

TiB2颗粒增强ZA－8锌合金的显微组织与疲劳裂纹扩展行为的关系

Relationship between microstructure and fatigue crack propagation behaviour in tib_2 particulate reinforced za-8 Zn Alloy

硅对ZA-27锌合金耐磨性的影响

The Influence of Silicon on the Wear-resistant Property of ZA-27 Zinc Alloy

因锌合金不易焊接，采用加入焊剂的方法对新型模用锌基合金（ZA合金）进行了TIG焊接。

Because of zinc alloy not being welded easily , the new mold zinc based alloy ( ZA alloy ) is weld by adding flux .

通过对GB与JISG、ASTM、ISO铝锌合金镀层钢板及钢带标准对照，了解、探讨标准的应用及发展方向。

By contrasting the standard GB with standard JISG , ASTM and ISO for aluminium-zinc alloy coated steel sheet and strip , the application and trend of standard are understood and discussed .

通过电解含ZnO的KOH溶液和缓蚀剂金属氧化物（包括PbO、Bi2O3、In2O3），得到锌合金粉。

Zinc alloy powder was prepared by electrolyzing the KOH solution with ZnO and the oxides of inhibitor metals (( including ) PbO , Bi_2O_3 and In_2O_3 ) .

ZnAl（4-1）锌合金标准物质的研制

Development of certified reference material znal_ ( 4-1 ) zinc alloy

Zr的线性范围为0～30μg/mL和30～50μg/mL，锆与ArsenazoⅢ的配位比为1∶2。方法用于镁锌合金及铝合金中锆的测定，获得满意结果。

The zirconium with Arsenazo ⅲ formed a stable complex in the molar ratio of 1 ∶ 2 . The proposed method has been applied to the determination of zirconium in aluminium alloy and magnesium-zinc alloy with satisfactory results .

采用钛、硼盐类变质可有效地细化高铝铸造锌合金ZA-27的初生α'相晶粒，显著提高合金的塑性、韧性。

The effective grain refinement of high-aluminium zinc foundry alloy ZA-27 has been achieved by using salt inoculants containing titanium and boron , resulting in remarkable improvement in the ductility and toughness of the alloy .

在DM3.0和DM3.0S都建立了坚实的铸造锌合金机身，钢网罩和内部球弹出屏幕。

The DM3.0 & DM3.0S are built with a solid cast zinc alloy body , steel mesh grille ball and internal pop screen .

报道了新试剂DBF-FAsA的合成及其应用于测定锌合金中添加微量元素铈量的方法。

This paper reported the synthesis of a new reagent BBF-FAsA and developed a simple and rapid spectrophotometric method for the determination of trace cerium in alloy with DBF-FAsA .

试验表明，在锌合金粉中添加In2O和PbO可以降低析氢量，加入Bi2O3可以改善电极放电性能；

The results show that : ( 1 ) Adding In 2O 3 and PbO into zinc alloy powder can reduce the amount of hydrogen evolution ; ( 2 ) Adding Bi 2O 3 into the powder can improve discharge performance of zinc electrode ;

热镀铝-锌合金钢丝生产过程控制回路的设计

Design of Controlling Circuit for Hot-Plating Al-Zn Alloy Wire During Processing

硅、锰合金化耐磨锌合金的研究

Study on the Wear-resisting Zinc Alloy with Si and Mn elements

组合添加剂对铅－锌合金共沉积的作用

Effects of the Composite Additives on the Co-deposition of Pb-Zn Alloys

稀土锌合金凝固组织与力学性能的研究

Study on Solidifying Structures and Mechanical Properties of Rare-earth Zinc Alloys

其主产品之一是压铸锌合金。

One of the main products is zinc alloy for diecasting .

锡锌合金镀层铬酸盐钝化及耐蚀性研究

Chromate Passivation of Sn-Zn Alloy Deposit and Corrosion Resistance of the Film

锌合金成型汽车灯壳模具技术

Manufacturing of Mould for Zn Alloy Automobile 's Light Housing

湿磨铜锌合金粉的退火工艺研究

Study on the Annealing Processes of Cu-Zn Alloy Powder by Wet Grind

原子荧光光谱法测定锌合金中锑量

Determination of Antimony in Zinc Alloy by Atomic Fluorescence Spectrometry

钛、锆变质处理对高铝锌合金凝固特性的影响

Effect of Ti and Zr Modification on Solidification Behavior of Zn-Al Alloy