陶瓷板

táo cí bǎn
  • Ceramic plate;ceramic wafer
陶瓷板陶瓷板
  1. 钛板与陶瓷板(Al2O3)的软钎焊

    Soldering Between Ceramic Substrate ( Al_2O_3 ) and Metal Titanium Carrier

  2. UO2陶瓷板状燃料元件

    UO_2 Ceramic Plate-Type Fuel Element

  3. 测定了漫射陶瓷板和海伦(Halon)粉末压制板的反射亮度分布曲线。

    Reflected radiance distribution curves of a mat ceramic plate and a Halon pressed powder plate have been measured .

  4. 以典型的PZT-5H压电陶瓷板为例进行了数值计算,并讨论了偏压电场对Lamb波相速度及频散曲线的影响。

    Numerical calculators were carried out for a PZT-5H piezoelectric ceramic plate . It is shown that the biasing electric field has great effect on the phase velocity of Lamb wave .

  5. 本文报导密封CO2波导激光器的结构设计、制造及其性能.器件放电长为12.5厘米,由四块BeO陶瓷板贴成1.5毫米方孔而成,腔长为15厘米。

    Configuration , fabrication and performances of sealed-off CO2 waveguide lasers are reported , with a discharge length of 12.5 cm , the device consists of four BeO plates arranged in a square hole of 1.5 mm size , the cavity is 15 cm long .

  6. 选用6种代表性物系对陶瓷板波纹和不锈钢丝网规整填料进行全回流精馏实验,考察Marangoni效应对规整填料液体流动分布及传质的影响。

    To investigate the influence of Marangoni effect on liquid flow and its distribution as well as separation efficiency of structured packing , binary distillation experiments were carried out at total reflux using six typical systems for ceramic corrugated sheet and stainless steel gauze structured packing .

  7. 陶瓷板红外线燃气灶节能效果的分析

    Analysis of Energy Saving Effect of Infrared Gas Range with Ceramic Plaque

  8. 陶瓷板卫燃带及其在电站煤粉炉上的应用

    A Ceramic Board-based Combustion Belts and Its Application in Pulverized-coal Fired Boilers

  9. 碳化硅陶瓷板上熔融煤灰侵蚀特性的实验研究

    Experimental Investigation on Corrosion Characteristic of Melted Ash on SiC Based Refractory

  10. 金属网对陶瓷板燃气红外辐射器性能的影响

    Impacts of Outside Metal Gauze on Performance of Gas-infrared Ported Ceramic Radiator

  11. 提高多孔陶瓷板辐射器表面发射率的意义

    Significance of surface emissivity improvement on the porous ceramic radiator

  12. 压电陶瓷板中非电渗透型反平面裂纹的电弹性场

    Electroelastic Field for an Impermeable Anti-Plane Shear Crack in a Piezoelectric Ceramics Plate

  13. 多孔陶瓷板红外线辐射器头部能量损失系数的确定

    Determination of energy loss coeficient on infra-red burner head with multi-port plate ceramics

  14. 多孔陶瓷板中燃烧过程的数值模型

    Numerical Model of Combustion Within Ported Ceramic Plaque

  15. 陶瓷板的阻挡有效地降低了反应器放电产生的臭氧质量浓度;

    The outlet mass concentration of ozone was effectively decreased with the ceramic plate barrier .

  16. 关于陶瓷板绘画艺术的思考

    Thoughts about Painting Art on Ceramic Plate

  17. 近年来,人们对天然气多孔陶瓷板红外线燃烧器的研究越来越关注。

    Recently , people pay more and more attention to ceramic porous monolith infrared burner .

  18. 解决回火问题是完全预混式多孔陶瓷板燃气红外灶推广应用的关键。

    The solution of flash back is important to the application of gas infrared ceramic cooker .

  19. 未装配的工具用金属陶瓷板、杆、刀头及类似品。

    Plates , sticks , tips and the like for tools , unmounted , of cermets .

  20. 含装甲钢和陶瓷板的钢纤维砼复合靶的抗侵彻实验研究

    Experimental Study of the Penetration into the Steel Fiber Reinforced Concrete Targets within Armor Plates and Ceramic Plates

  21. 一种新型的具有表面复合层的煤气远红外多孔陶瓷板的结构和性能

    The Structure and Properties of a new Infrared Radiation Porous Ceramic Plate Having Composite Layer Used on Gas Stoves

  22. 运用Fe-水系电极电位-pH图,寻找出陶瓷板微孔堵塞的原因及其处理方法。

    The blockage reason & process method of the ceramics plate in the ceramics filter is found employing the Fe-H2O electrode potential pH graph .

  23. 分析了陶瓷板红外线燃气灶热效率比大气式燃气灶高的原因:具有陶瓷板辐射体,辐射效率高;

    This paper analyzed the reason why the thermal efficiency of an infrared gas range with ceramic plaque is higher than that of an atmospheric gas range .

  24. 借助多孔介质中燃烧过程的化学动力学,通过对多孔陶瓷板内有限单元的能量分析,建立了燃烧过程的数值模型。

    In this paper a numerical model of combustion within ported ceramic plaque was set up by introducing kinetic data which were used for study in porous media .

  25. 研究了有色金属连铸、半连铸过滤用大型泡沫陶瓷板的工艺技术配方及生产控制参数。

    The technological process and controlled parameter of the large foam ceramic filtering plate used in the continuous casting machine and semi-continuous casting machine of nonferrous metals are studied .

  26. 传统的装甲防护系统的外层为高强抗撞击板,中间层为陶瓷板,内层为金属支承板。

    In the conventional armor protection system , the outer layer is a high-strength anti-impaction plate , the intermediate layer is a ceramic plate , and the inner layer is a metal supporting plate .

  27. 结果表明,盖板、环向约束、增大陶瓷板和背板的厚度可增强陶瓷复合装甲的抗侵彻性能。

    From the result , we can kow that perfect bound format , using high-strength materials to cover plate , increasing the thickness of ceramic board / support plate can enhance the ballistic performance of ceramic composite armor .

  28. 对不同工况下的天然气预混燃烧进行模拟,并分析了燃烧特性受热负荷、过剩空气系数、多孔陶瓷板开孔率和多孔陶瓷板导热系数的影响。

    The natural gas premixed combustion was simulated under different projects and the impact of combustion character was analyzed by heat load , surplus air coefficient , porosity of the ported ceramic plaque and conduct coefficient of the ported ceramic plaque .

  29. 为考察装甲钢板和陶瓷板的抗侵彻特性,在钢纤维混凝土靶中分别加入两种不同厚度的装甲钢板和陶瓷板振动成型。

    In order to investigate the protective performances of the armor plate and the ceramic plate , armor plates and ceramic plates with two kinds of thickness were put into the steel fiber reinforced concrete ( SFRC ) targets when the targets were molded .

  30. 实践中发现,调整矿浆pH是解决陶瓷滤板堵塞的有效方法。

    It is found that in the practice regulate the pH of the pulp is effective to solve the micro orifice blockage of the ceramics plate of the ceramics filter .