首页 / 词典 / good

仪物

仪物仪物
  1. 利用X-ray衍射仪进行物相分析,证明产品为四方晶系锐钛矿结构,用TEM观察样品形貌为无序介孔材料,可以很清楚地看到蠕虫状的无序孔道。

    The structure of the synthesized product was discussed by XRD analysis ; proved that the products belong to the Department of tetragonal anatase structure . TEM observation of samples used for the disordered morphology of mesoporous materials , can clearly see that the vermiculate ostium .

  2. 落锤式织物撕破强力测试仪织物缝合的断裂强力测定法

    Falling-pendulum apparatus test method for seam breaking strength of woven fabrics

  3. [拉绒织物]起球试验仪机织物抗起球起毛性试验法:加压法

    Testing method for the pilling in woven fabrics : pressure method

  4. 以PHILIPSPW1700X射线衍射仪进行物相的定量分析

    X-ray Quantitative Analysis by Philips PW 1700 Diffraction System

  5. 在机载微光夜视仪的物镜中采用先进的二元光学技术,从而设计出一种新颖的折衍混合物镜光学系统,简化系统结构、缩小体积、降低重量,提高像质和光学效率;

    Employing modern binary optical technology in the objective lens of airborne night vision goggle , we designed a novel refractive diffractive hybrid field lens with simple structure , small size , light weight and improved optical performance and efficiency .

  6. FAST仪军服织物评价系统指标的研究

    A study on evaluating indicators of uniform fabric evaluation with FAST

  7. 利用XRD衍射仪对其物相结构进行了表征。

    Their phase structures are depicted with a XRD diffractometer .

  8. 用X射线衍射仪进行了物相分析;用金相显微镜和电子显微镜观察了合金组织。

    Phase structure analysis and metallographic structure observation were made by X-ray diffractometer and optical and electron microscope respectively .

  9. 激光粒度仪测定复合物粒径和Zeta电位;

    The particle size and zeta potential were measured by laser particle size analyzer .

  10. 应用矿相显微镜、电子探针、x射线衍射仪和化学物相分析等测试手段,研究了澜沧银铅锌矿中金银的赋存状态。

    The occurence of gold and silver in Lan-Cang Silver-Lead-Zine Mine were studied with the help of ore microscope , electronic probe , x-ray diffractometer and phase analysis .

  11. 于紫外灯下切取含有聚合酶链反应产物的凝胶条带,用液体闪烁计数仪测定扩增物32P的放射强度。

    Gel strap of product of PCR was obtained under ultraviolet lamp . Radiative intensity of amplified product 32P was determined with liquid Scintillation Counter .

  12. 对金刚石表面化学镀NiP工艺进行了研究,用X射线衍射仪进行了物相鉴定,结果表明:高P化学NiP镀层为非晶态,热处理后镀层转变为Ni3P晶态结构。

    The process of electroless plating mental of Ni-P on the surface of diamond is investigated in this paper . The results are identified by means of X-ray diffraction . The results are described as follows : The Ni-P coating with high P content is non-crystal before heat treatment .

  13. β-射线织物[含湿]秤重仪无纺织物生产线(湿法)

    Beta-ray weightometer Non-woven fabric lines ( wet process )

  14. 色质联用仪生物标志物数据库的建立与扩展

    Establishment and Expansion of the GC / MS Mass Spectra Data Base of Biomarkers

  15. 通过单晶X-射线衍射仪对配合物的晶体结构进行了测定,并对某些配合物的热稳定性及荧光性质进行了研究。

    These complexes structurally characterized by single crystal X-ray diffraction and the thermal stabilities and fluorescent properties of some complexes have been studied .

  16. 采用LLY01B型电脑控制硬挺度仪测试织物硬挺度,并对影响织物硬挺度的因素进行了测试分析。

    With LLY-01B stiffness tester controlled under computer , the fabric stiffness is tested , and the influencing factors of fabric stiffness are analyzed .

  17. 简要介绍了滚箱式起球仪测试织物起毛起球的国家标准GB/4802.3-1997,针对箱体内起关键作用的软木复合材料(软木/橡胶)的表面摩擦系数的测试方法提出改进。

    This paper introduces the National Standard of ICI pilling box-GB / 4802.3-1997 in brief for us . We approve the test of cork material s friction modulus in ICI pilling box which is most important in testing .

  18. 溶解&反应热量仪和稀土配合物的热力学性质本体法合成ABS树脂Ⅱ.预聚合反应动力学研究

    A Solution-Reaction Calorimeter and Thermodynamic Properties of Complexes of Rare Earth ; Bulk polymerization of ABS resin ⅱ . Study on prepolymerization kinetics

  19. 用电喷雾质谱仪测定PLA2同源物分子量。

    The relative molecular mass of the homologue was measured by electrospray ionization mass spectrum .

  20. 研究方法1.运用全骨髓贴壁法分离、培养MSCs;通过形态学、流式细胞仪检测表面标志物鉴定MSCs。

    MSCs was isolated and purified by whole bone marrow adherent method ; MSCs was identified by morphologic characteristics , surface antigens detected with flow cytometer . 2 .

  21. 本文运用模糊聚类法及系统聚类法,对KES-F系列织物风格仪测试的织物风格指标值进行了分类。

    In this paper , the hand indices obtainzd by the KES-F hand meter are satisfactorily classified with both the Fuzzy Cluster Method and the Hierachical Cluster Method .

  22. 利用全站仪进行遇障碍物直线测设新方法的研究

    A New Method of Line Setting-out in Particular Situation with Total Station

  23. 希望微型测量仪可以找到诱物的来源。

    Hopefully , the minirae can follow the lure to its source .

  24. 首先我觉得该用质谱仪分析一下发光物

    First , I said we put the glowy thing in the mass spectrometer

  25. 平板式保温仪是目前织物热传递性能测试的重要仪器,文中针对仪器所提供的保温率指标是否能实际描述织物热阻进行了研究。

    Guard heated plate instrument is an important testing method for fabric heat transmitting properties .

  26. 最后,通过红外光谱仪、差示扫描量热仪,对接枝物结构进行表征。

    Structural Characterization of graft polymer was performed by Infrared spectrograph and differential scanning calorimeter .

  27. 本文采用自制的准静态穿刺仪对纬编针织物进行准静态穿刺实验。

    In the article , quasi-static stab-resistant strength of weft-knitting fabrics was tested from a quasi-static stab instrument made by ourself .

  28. 织物紫外线透过率测试仪是衡量织物抗紫外线能力的仪器,氘灯作为优选的紫外光源,其辐射强度的稳定密切关系到测量的精度和一致性。

    The deuterium lamp is often used as ultraviolet ray lamp in UV measuring instrument , the measuring accuracy of the instrument has close correlation with the stability of radiation energy .

  29. 采用毛细效应测定仪测试了棉织物的导湿速率,并建立了芯吸速率曲线回归方程,同时对织物芯吸机理进行了理论分析。

    The capillarity effect tester tests the moisture conductivity rate of cotton fabric , then the curve regression equation of wicking rate is established and wicking principle is also theoretically analyzed .

  30. 针对离子膜烧碱生产中盐水悬浮物的测量,介绍了浊度的概念和浊度仪在盐水悬浮物测量中的应用。

    Aiming at the determination of suspended substance content in brine in ionic membrane caustic soda production , this paper introduced the concept of turbidity and the application of turbidimeter in determination of suspended substance content in brine .