仿真测试

分布式ATP仿真测试系统的关键技术研究

The Critical Techniques of A Distributed ATP Simulation Detective System

本文主要介绍了一种数字化仿真测试板的设计及其实现，在设计中使用了以太网总线，利用DSP和FPGA组合的方式，有效地满足了本测试系统速度快，可靠性高的要求。

In this article , the design and realization of digital simulation and testing board are mainly introduced . In the design , the Ethernet 、 DSP and FPGA are integrated to efficiently fulfill the requirement of high-speed and reliability .

RFID系统动态仿真测试技术的研究

Approach to the dynamic modeling test method of RFID system

基于UML的C~3I仿真测试环境建模研究

Modeling the Simulation and Testing Environment for C ~ 3I System based on UML

在论文的最后，对FPGA的设计方法以及设计的仿真测试方法进行了说明。

The FPGA design and hardware test of the design is presented in the end of this paper .

ATP仿真测试系统中ATS子系统的设计与实现

Design and implementation of ATS Subsystem in ATP Testing Simulation System

基于小波分析的ECU仿真测试台信号检测

Signal checking for ECU simulation testing platform based on wavelet analysis

讨论了电力系统故障仿真测试装置中USB通信驱动程序的开发。

The development of USB function driver used in power system faults simulation test device is discussed in this paper .

MTS自动事务一致性仿真测试

Simulation in testing the consistency of mis ' auto - transaction

最后，在Matlab环境下，进行了系统运行状态的仿真测试，并与不同算法的优化结果进行了对比。

Then simulation tests of the state of operating system are conducted by Matlab and results of various optimization algorithms compared in the paper .

基于CVS系统的BSC仿真测试模块设计

Design of simulative test module based on CVS system

仿真测试显示Snoop协议在GPRS网络中性能低下。

Simulation test shows that performance of Snoop protocol is poor in GPRS networks .

C3I仿真测试环境的研究

Research on the Simulation and Test Environment for the C3I System

1553B总线通用仿真测试系统设计与研究

Design and Search of 1553B bus general simulating & testing system

最后提出了C3I仿真测试环境在HLA中的应用展望。

At last the application of S & TE for the C3I system to HLA was presented .

系统软件在CCS环境下进行了仿真测试，验证了系统的可行性。

The CCS environment was used for simulation tests of software to verify the feasibility of the system .

基于设计出的神经网络钻压控制器，通过MATLAB仿真测试，测试证明神经网络控制器的训练过程可进行有效的收敛，其泛化能力也达到要求。

Matlab simulation is developed with the bit pressure controller of artificial neural network , the result of simulation is positive the analyses which is convergent and high ability of expand .

CTCS-3级列控系统仿真测试平台&轨旁子系统仿真研究

The CTCS-3 Simulation and Testing Platform-Research on Simulation of Trackside Subsystem

经过大量的仿真测试，基于FPGA技术的写策略子系统和自动激光功率控制子系统设计方案合理可行，性能稳定、可靠。

A large amount of simulations reveal that Write Strategy subsystem and Auto laser Power Control subsystem , based on the FPGA technology , has a compact structure and reliable characteristics .

并且用Matlab软件对标准测试序列进行了仿真测试，试验结果表明，通过这两种方法能够在没有明显的失真的情况下有效的提高编码速度。

We test it by the standard testing-sequence with the software of Matlab . The experimental results show that the combined proposed methods provide significant improvement in processing speed without noticeable coding loss .

基于xPC的地铁TCU实时仿真测试系统设计

Design of Real-time Simulation Testing System for Metro TCU Based on xPC

介绍了改进的BP学习方法，仿真测试结果证明，用频谱分析与神经网络相结合的方法进行电子封装机械的工况识别具有简单、有效等优点。

Also introduces the neural network of improved BP learning algorithm . The results of simulation and testing indicate that identifying the working condition of the electronic packaging machine by applying the above method is more efficient .

详细分析了PPM编码的帧结构，说明了脉冲编号的解码方案以及电路的实现原理，最终给出电路的仿真测试结果。

The paper analyzes frame architecture of PPM code in detail , illustrates pulse-number method and implementation principle of the circuit , and supplies test result of the circuit .

最后，阐述SIP注册服务器、SIP代理服务器、媒体网关和Web管理模块的实现过程，并利用仿真测试环境，对延迟优化方案和IPv6环境下越界切换的优化方案进行了验证。

Finally , the implementations of SIP register server 、 proxy server 、 media gateway and Web management modules are proposed . The feasibility of optimization issues of media stream delay and IPv6-based handoff is testified using simulation environment .

最后通过模拟仿真测试，证明本文所构建的FDM控制成形软件人机界面评价指标体系是科学、公正、客观和有效的。

Finally , through simulation tests to demonstrate this control of the building forming the FDM machine interface software evaluation system is a scientific , impartial , objective and effective .

然后，基于VHDL进行智能控制器的分层设计，实现开环时序仿真测试和基于VHDL的智能控制器闭环测试；

A hierarchical design of the intelligent controller based upon VHDL is presented and the implementation of the open-loop test is given . The closed-loop test of the intelligent controller based on VHDL is realized .

同时，针对如何通过调整AP的功率优化网络信号覆盖的问题，进行了详细分析，提出了针对功率调整的优化网络吞吐量的设计方案，并进行了仿真测试。

Meanwhile , about how to adjust AP power by optimizing the network signal coverage problems , a power adjustment for the optimization of network throughput has been proposed after a detailed analysis and simulation has been finished .

随着软硬件技术的发展，一些新型的仿真测试技术涌现出来，在测试效率和测试质量上都表现出了明显的优势，其中包括dSPACE。

With the development of hardware and software technology , some new simulation test technologies which can improve test efficiency and quality have emerged , such as dSPACE .

大量的电势暂态程度（EMTP）仿真测试表明：该方法的故障测距精度高、综合性能好、适应性强。

Results from theory analysis and simulation by Electro magnetic Transient Program ( EMTP ) show that fault location precision of this method can completely satisfy practical requirements .

分析基于高层体系结构的电子战仿真测试与评估包括两个方面，HLA各组成部分性能以及电子战系统自身效能的测试与评估。

There are two aspects towards EW test and evaluation ( T & E ) based on high-level architecture ( HLA ), i.e. , the performance of HLA components and the measures of effectiveness ( MOE ) of EW systems .