作业场所

  • 网络workplace
作业场所作业场所
  1. 基于MATLAB的作业场所风险评估

    Workplace Risk Assessment Based on MATLAB

  2. 其中蓄电池制造业作业场所中铅浓度最高,STEL浓度最高达到0.56mg/m3。

    The air concentration of lead in battery manufacturing workplace was the highest , and the maximum STEL was 0.56 mg / m.

  3. 说明A型行为人的心理较其他行为人的心理脆弱,为此在改善作业场所劳动条件的同时,特别要对A、C型行为的人提供心理治疗和健康指导。

    It is suggested that while improving working conditions , to provide RSVD with psychological treatment and health guidance , especially RSVD of Type A , C behaviour .

  4. HACCP在造船业作业场所卫生质量控制中的应用

    The Application of HACCP in the Sanitary Quality Control of Shipbuilding Work Environment

  5. 结论:运用HACCP开展卫生质量控制可显著提高造船业作业场所卫生质量。

    Conclusions : The application of HACCP in health inspection could significantly promote the sanitary quality of shipbuilding work environment .

  6. 结果①复印作业场所开机后O3、NOx的浓度显著高于开机前(P<0.01);

    Results 1.In copying places , the average values of O3 , NOx under operating condition were significantly higher than those of under off - operating condition ( P < 0.01 ) .

  7. 方法对作业场所进行职业卫生调查及空气中TDI浓度检测,并对作业工人进行健康检查。

    Methods The occupational health conditions were investigated and the concentrations of TDI in the air of workplaces were also measured .

  8. 对作业场所空气中DMF浓度进行监测对接触DMF员工进行职业健康检查。

    DMF concentration in the air of the worksites was detected ; occupational physical examination was conducted on the DMF-exposed workers .

  9. 方法对发电机组主控室、网控室、变电设备、高压输出(TB)区等作业场所的工频电场场强和高压输出电线下的电场分布情况进行了测量。

    Methods Electric field intensities were measured at the controlling center of generating sets , netting control rooms , transformer equipments and high voltage transmitting TB region also in transmission line with different voltage grade .

  10. 方法对PVC管材生产企业进行职业卫生调查,对铅危害采取以职业健康教育、卫生防护工程和职业卫生管理等多措施的综合治理,治理前后检测作业场所铅尘浓度,作业工人进行职业健康检查。

    Synthetic control measures were implemented , including occupational health education , health protective engineering and occupational health management . Lead dust concentration was evaluated . The workers who were exposed to lead dust were checked regularly .

  11. 结论复印作业场所存在O3、NOx的污染,复印作业者体内的氧化和过氧化反应加剧,且O3和复印工龄与其有一定的相关关系。

    Condutions There are pollution on O3 and NOx in copying operation places . It is suggested that oxidation and peroxidation in copying operator may be aggravated , and , there is certain correlation negatives between O3 and length of service of copying operator .

  12. 结果:运用HACCP以后,有效地控制了生产过程中的危害因素,作业场所卫生指标合格率明显上升(P<0.05)。

    Results : After the application of HACCP in health inspection , the hazardous factors of sanitary quality in the processing were well controlled , and the qualified rates of sanitary indexes in work environment increased significantly ( P < 0.05 ) .

  13. 目的应用毒物代谢动力学基本原理,探讨将作业场所空气中有害物质容许接触限值(PEL)转换为机体生物材料中生物接触限值(BEL)的方法。

    Objective To study theoretical approach to extrapolate from ambient permissible exposure limits ( PEL ) to biological exposure limits ( BEL ) in the biological media by application of the fundamental concepts of toxicokinetics .

  14. 结论DNT主要抑制机体抗氧化能力,易导致中毒性溶血性贫血,可对肝脏产生不良影响。建议作业场所空气中的DNT的MAC为05mg/m3,TWA浓度为03mg/m3。

    Conclusion Long time exposure to DNT could inhibit antioxidation ability , induce toxic hemolytic anemia and liver injury and the suggesting MAC and TWA of DNT in workplace should be 05mg / m3,03mg / m3 respectively .

  15. 结果作业场所通风状况较差,两个车间空气中TDI平均浓度分别为28mg/m3,29mg/m3。

    Physical examinations for the workers were also proceeded . Results There was no effective ventilation in the workplaces , the average concentrations of TDI in the air in two different workshops were 2 8 mg / m 3,2 9 mg / m 3 respectively .

  16. 方法:根椐GB16248-1996《作业场所空气中呼吸性煤尘卫生标准》,测定呼吸性煤尘浓度;

    Methods : According to GB16248-1996 " Health Standard for respirable coal dust in the air of workplace ", we determined the concentration of respirable coal dust ;

  17. 作业场所空气中碳纤维粉尘卫生标准的研究

    Health standars for carbon fiber dust in the air of workplaces

  18. 方法作业场所职业卫生学调查,气相色谱法测定样品;

    Methods Occupational hygiene investigation were made on the work sites .

  19. 油田固定作业场所有源噪声综合治理

    Comprehensive Treatment on the Oil Fields Fix Locale of Active Noise

  20. 煤矿井下作业场所粉尘浓度的法律管理

    The Legal Management of Dust Levels at Underground Coal Mine Workplaces

  21. 谈谈苯作业场所的综合防护措施

    Talk about the comprehensive pretection measures at the benzol work place

  22. 工业典型危险作业场所火灾预防与控制技术研究展望

    Overview on Prevention and Control of Fires of Typical Industry Hazards

  23. 作业场所职业危害监管移动终端系统初探

    Research on mobile terminal system of occupational hazard supervision at workplace

  24. 作业场所空气中粉尘浓度的不同测定方法比较

    A Comparison Between Two Monitoring Methods for Dust Concentration in Working Spots

  25. 参与影响作业场所安全卫生任何变化的商讨;

    Consulted where there are any changes that affect workplace and safety ;

  26. 铁路粉尘作业场所36种粉尘粒度质量分布特性研究

    The study of granule quality distribution feature in 36 kinds of dust

  27. 洞口喷混凝土的作业场所应有防冻保暧措施。

    Antifreezing measures shall be taken at the portal shotcrete working area .

  28. 作业场所职业危害基础数据标准设计

    Design of standard on basic data element for occupational hazard in workplace

  29. 作业场所空气中丙烯酰胺的气相色谱直接测定法

    Direct Measurement of Acrylamide in The Air of Workshop by Gas Chromatography

  30. 摘要目的预防、控制和消除作业场所职业病危害。

    Objective to control end prevent the occupational hazards in the workplaces .