合金钢丝

  • 网络alloy steel wire;SWOSC-B
合金钢丝合金钢丝
  1. 热镀Zn、Al及其合金钢丝有着广阔的应用前景。

    It has broad application prospects to plate Zn , Al and alloy steel wire that it is hot .

  2. 热浸镀Zn-5%Al-RE合金钢丝镀层的表面形貌

    Surface Morphology of Zn-5 % Al-RE Coating Hot Dip Plated on Alloy Steel Wire

  3. 结果得出,低碳低合金钢丝比高碳Patenting钢丝具有高的低周疲劳抗力,温形变处理又可提高低周疲劳寿命30%~35%。并对这种钢丝的低周疲劳损伤进行了评价。

    The results show that the low cycle fatigue properties of the wire is higher than that of high carbon Patenting steel wire .

  4. 热镀铝-锌合金钢丝生产过程控制回路的设计

    Design of Controlling Circuit for Hot-Plating Al-Zn Alloy Wire During Processing

  5. 合金钢丝石笼技术在长江堤防加固中的应用

    Application of the Technology of Alloy-Steel Wire Gabion in Enforcement of the Changjiang Main Dyke

  6. 光电直读光谱持久曲线法分析低合金钢丝

    Using permanent working curve for the direct reading spectroscopic analysis of low alloy steel wires

  7. 高碳低合金钢丝拉拔杯锥断口的成因

    Mechanism of Cup - cone Fracture Formation during High Carbide Low Alloy Steel Wire Drawing

  8. 大桥吊索绳用热浸镀锌-5%铝稀土合金钢丝的试制

    Trial - manufacture of Hot Dip Zn - 5 % Al-mischmetal Alloy Coated Wire for Bridge Stay Cables

  9. 本文报道应用弹性合金钢丝作支架制成的生物瓣膜,为45名病人替换心脏房室瓣的经验。

    From April 1984 to April 1986 , 45 bioprosthetic valves mounted on flexible stent made of Elgiloy were used to replace heart atrio-ventricular valves .

  10. Zn-Al-Mg-RE合金镀层钢丝的研制

    Development of Hot Dip Zn-Al-Mg-RE Alloy Coating on Steel Wire

  11. 热浸镀Zn-55%Al-1.6%Si合金镀层钢丝耐蚀性能在合金相(Al-Si-Fe三元金属间化合物)为最佳;

    The optimal anti-corrosion layer of Zn-55 % Al-1.6 % Si was intermetallic layer ( Al-Si-Fe );

  12. W4Mo3Cr4V1Si(SG101)低合金高速钢丝的研制

    Research and Production of W4Mo3Cr4V1Si ( SG101 ) Low Alloy High Speed Steel Wire

  13. 本文探讨了GH90合金弹簧钢丝的固溶处理、表面处理以及拉拔变形量和拉拔工艺。

    This paper discusses the solid solution , surface treatment and drawing deformation and drawing process of GH90 alloy spring steel wires .

  14. Zn-5%Al-RE合金镀层钢丝表面质量分析

    Analysis of Surface Quality for Zn-5 % Al-RE Alloy Coating Steel Wire

  15. 合金焊条钢丝生产综述

    A summary on production of alloyed steel welding wires

  16. 锌铝合金镀层钢丝在桥梁缆索上应用的探讨

    Inquiry into Application of the Zn-Al Alloy Coat Steel Wires to Bridge Cables

  17. 关于我国锌铝合金镀层钢丝发展的探讨

    Discussion on the Development of Zn - Al Alloy Coated Steel Wire in China

  18. 碳化钨钢结硬质合金螺纹钢丝轧辊的研制及应用

    Study and Application of the Screw Steel Wire Roller Made of WC Steel bonded Carbide

  19. GB/T5954-1986冷顶锻用合金结构钢丝

    Alloy structure steel wires for cold heading

  20. 锌铝合金镀层钢丝具有比纯锌镀层钢丝耐蚀能力高的优点。

    The Zn-Al alloy coat steel wire has higher anti-corrosion properties than the Zn-coat steel wire .

  21. GB/T5954-1986冷顶锻用合金结构钢丝这些不平的金属片平时用来做屋顶。

    Alloy structure steel wires for cold heading These corrugated sheets often are used to make the roofs of houses .

  22. 分析了Zn-5%Al-RE合金镀层钢丝表面不平整的原因,并提出了应采取的措施。

    To analyze the reason why the surface of Zn-5 % Al-RE alloy coating steel wire is unsmoothed and give some measures .

  23. 通过在工艺上对钢丝浸锌距的试调,开发锌-铝-稀土合金镀层钢丝产品的试验,日常打捞锌渣时采用过滤等方法,使锌耗下降;

    Adjusting distance galvanizing by dipping of steel wire , making test to develop Zn-Al-Re alloy coating and adopting filtrate salvaging Zn residue can reduce consumption of Zn .

  24. 化学镀镍磷合金在纺纱钢丝圈上的应用研究

    Application of Electroless Plating Ni-P Coating in Textile Ring Traveller

  25. 锌-铝-稀土合金热镀钢丝助镀剂选择的研究

    The plating solution selection of Zn-Al-RE alloy for steel wire with hot plating

  26. 用碳化钨钢结硬质合金制造螺纹钢丝轧辊,通过选用适当的合金牌号及热处理工艺,可显著提高轧辊的使用寿命。

    The service life of screw steel wire rollers can be remarkably raised by using WC steel bonded carbide and suitable heat treatment technology .

  27. 一种低碳低合金低松弛预应力钢丝的研究

    A low carbon low alloy and low slack prestressed steel

  28. 一种低碳低合金超高强度钢丝低周疲劳寿命的研究

    Low cycle fatigue life of a low carbon low alloy ultra-high strength steel wire