复膜胶

  • 网络lamination adhesive
复膜胶复膜胶
  1. 环保型乳液型纸塑复膜胶研制

    Study on the emulsion paper-plastics lamination adhesive of environmental friendly type

  2. 萜烯树脂乳液与EVA乳液的质量比值为0.3时,复膜胶的剥离强度最大。

    The largest tensile strength was obtained at mass ratio 0.3 of the terpene resin emulsion and the EVA emulsion .

  3. 该产物能够在水中分散并且能够稳定至少6h,将其加入到水性复膜胶中能够显著提高水性复膜胶的粘接性能。

    It can improve the performance of aqueous adhesives for laminated film when it was added in the adhesives .

  4. 通过甲基丙烯酸甲酯接枝改性,提高SBS复膜胶的耐候性、耐老化性和粘接强度。

    Weather and ageing resistance , adhesive strength of SBS film-covered adhesive are improved through modification with graft copolymerization of methyl methacrylate ( MMA ) .

  5. 简介了EVA乳液在皮革加工、复膜胶以及建筑建材等方面的应用情况,综述了EVA乳液的改性方法,主要分为共混法、加助剂法、共聚法。

    The paper introduced the situation of EVA emulsion applied in aspects of leather process , laminating adhesive and architectural materials etc , and modifying methods of EVA emulsion including blend , additive and copolymerization were summarized .

  6. 用乙烯-醋酸乙烯共聚物(EVA)乳液、萜烯树脂乳液和阳离子型苯乙烯-丙烯酰胺共聚物研制了系列水基复膜胶,并考察了萜烯树脂乳液中乳化剂结构对复膜胶性能的影响。

    A series of water-soluble paper / plastics laminating adhesives were prepared using an EVA emulsion , terpene resin emulsions and cationic styrene-acrylamide copolymer , and effects of surfactants in the terpene resin emulsions on properties of the adhesives were investigated .

  7. 由高分子表面活性剂(HS-2)制得的萜烯树脂乳液增加复膜胶剥离强度的效果最好。

    Terpene resin emulsion prepared with polymeric surfactant ( HS-2 ) performed the best effects in increasing tensile strength of the adhesives .

  8. 聚乙二醇400对水性复膜胶合成及性能的影响

    Influence of PEG-400 on preparation and performance of aqueous laminating adhesive

  9. 影响水性聚氨酯复膜胶粘接性能因素的研究

    Study on factors affecting bonding properties of waterborne polyurethane laminating adhesives

  10. 苯-丙乳液复膜胶生产工艺条件探讨

    Study on processing condition of styrene-acrylic emulsion of covered film adhesive

  11. 萜烯树脂乳液在水基复膜胶中的应用

    Application of Terpene Resin Emulsion in Water-soluble Paper / Plastics Laminating Adhesives

  12. 高性能醇溶性复膜胶的研制

    Preparation of Alcohol - soluble Laminating Adhesive with High Performance

  13. 聚氨酯复膜胶的现状及研究进展

    Present status and research progress on polyurethane laminating adhesive

  14. 松香铝丙烯酸酯增粘树脂在水性复膜胶中的应用

    Application of rosin aluminium acrylic ester tackifier in the aqueous laminated film glue

  15. 水性纸塑复膜胶的研究进展

    Research Progress on Water-soluble Paper / Plastic Laminating Adhesive

  16. 丙烯酸酯类乳液型纸塑复膜胶的研究进展

    Research development of acrylic emulsion adhesive for paper-plastic lamination

  17. 醇溶型丙烯酸酯复膜胶的合成

    Synthesis of acrylic ester-based alcohol-soluble adhesives for film-covering

  18. 蒙脱土复膜胶的制备及流变行为

    Preparation and rheologic behavior of MMT laminating adhesive

  19. 概述了聚氨酯复膜胶的分类及各自的优缺点;

    The classification and their respective advantages and disadvantages of polyurethane lamination adhesives are outlined .

  20. 装潢复膜胶的研究

    The Research on Finishing Adhesive

  21. 乳液型复膜胶存在问题及解决方法的实验研究

    The experimental research on the solution of the problem in the course of the coating of the emulsion paper-plastic composite adhesive

  22. 探讨了影响水性聚氨酯复膜胶粘接性能的各种因素,并对它们的影响规律做了初步研究。

    The article discussed factors effecting the bonding properties of waterborne polyurethane laminating adhesives and studied the affecting patterns of these factors .

  23. 解决了传统复膜胶耐水性差和低温下的初粘性低的不足之处。

    And some disadvantages of traditional paper-plastic adhesive have been solved , for example , the poor water resistance and first-viscousness at low temperature .

  24. 讨论了单体、引发剂用量及反血温度、时间等对复膜胶性能的影响。

    The effects of the amount of monomer and initiator , time and temperature of the reaction on properties of film-covered adhesive are discussed .

  25. 实验结果表明,该复膜胶可用于制备塑料复合薄膜,具有环保、无毒、剥离强度高和快速固化等特点,适用于快速干式复合薄膜的生产线。

    The preparation method and performance of a new type of alcohol-soluble acrylate adhesive modified by epoxy resin for dry laminating film are introduced .

  26. 可广泛用于醇溶性及水溶性复膜胶、敏胶、料印刷油墨、子助焊剂等。

    It is widely used in alcohol-soluble and water-soluble poly membrane adhesive , pressure sensitive adhesive , plastic printing ink , and electronic flux , etc.

  27. 简述纸塑复膜胶的应用状况及研发动向,进而讨论了与纸塑复膜胶相关的问题及其发展方向。

    The essay gives an outline of state of application of paper-plastic laminating adhesive and the trends of research and development and further discusses the related problems .

  28. 研究了由丙烯酸酯单体为主成分的醇溶型复膜胶的合成工艺,讨论了反应条件对复膜胶性能的影响。

    The synthetic process of alcohol-soluble adhesives for film-covering by using acrylic ester as the main component is studied , and the influence of various reaction conditions on the adhesive properties is also discussed .