多孔材料

基于Voronoi随机模型研究多孔材料的动态特性

Study of the dynamic crushing behavior of cellular materials by using the Voronoi random models

多孔材料的力学性能及破坏机理

Mechanical Properties and Breakage Mechanism of Cellular Materials

Ni基高温合金空心球多孔材料制备工艺

Production Technology of Ni-Based Superalloy Hollow Sphere Foams

TiO2/SiO2漂浮固定床多孔材料光催化氧化活性研究

Photocatalytic activity of TiO_2 / SiO_2 on porous material in floating fixed bed reactor

在超临界CO2中以活性炭为模板，乙酰丙酮铝为前驱体制备了氧化铝多孔材料。

Porous alumina material was prepared with activated carbon as template and aluminum acetylacetonate as precursor in supercritical carbon dioxide ( SC-CO2 ) .

利用SEM、XRD等手段分析了多孔材料的组织结构与相组成，测量、分析了不同制备工艺下空心球多孔材料的力学性能。

By means of scanning electron microscopy ( SEM ), X-ray diffraction ( XRD ), the microstructure , phase composition and mechanical property of alloys were investigated .

SAXS方法及其在多孔材料研究中的应用

Method and Application of SAXS in Porous Materials

FeCrAl纤维多孔材料梯度结构吸声性能的研究

Study on sound absorption performance of FeCrAl fibrous porous materials gradient structure

W-Ni-Fe合金多孔材料的研究

An investigation of porous W-Ni-Fe alloy

探讨了吸附温度、吸附时间、溶液pH、染料初始浓度以及吸附剂的用量等条件对多孔材料吸附去除印染废水中有机染料的影响及其影响的原因。

Discusses of the temperature 、 mixed time 、 initial pH 、 concentration of dye solution and the dose of the porous material influence on the removal of the organic dye from the waste water and the reason .

MJS快速成型制备金属多孔材料

MJS Rapid Prototyping Technology in Fabricating Metal Porous Materials

多孔材料的电导率随着温度的升高而升高，由ln（σT）~1/T曲线，可得电导活化能Ea为10.99kJ/mol。

The conductivity of porous materials increased with increasing temperature . According to ln (σ T ) ~ 1 / T curves , Ea was calculated to be 10.99 kJ / mol.

SiO2气凝胶是一种新型轻质纳米多孔材料。本工作以多聚硅氧烷（E-40）为硅源，用溶胶-凝胶法制备出了SiO2气凝胶。

Nano-porous material SiO 2 aerogels were made by using industrial silicon derivatives ( polyethoxydisiloxanes , E-40 ) obtained by the catalytic reaction of methanol and silicon .

吸声用烧结FeCrAl纤维多孔材料是金属纤维领域一个新的研究方向。

Sintered FeCrAl fibrous porous materials used in sound absorption field is a new study orientation in metal fibrous technology area .

搭建了高温氧化、高温硫化及多孔材料透过率实验装置，对所制备的FeAl基多孔材料性能进行了性能表征。

High temperature oxidation , sulfidation and porous material permeability experiment device were built for the properties characterization of the prepared FeAl based porous material .

以Lee多孔材料屈服模型为基础，并假设空穴密度积累到一临界值时，材料出现裂纹，推导出适用于多孔材料的韧性损伤模型。

Based on Lee 's plastic yield function for porous material , and hypothesis that fracture initiation occurs when the void density is accumulated to a critical value , a new ductile damage model for porous material was derived .

利用N2吸附、SEM等方法对不同酸条件下制得的微球进行了性能研究，结果表明：该法制得的氧化铝微球为多孔材料，其孔径在介孔范围。

Property study of mesoporous alumina granules obtained on different acid contents was conduced with N_ ( 2 ) isothermal adsorption and under SEM , etc. It was found that the alumina granules with mesopore was obtained by this method .

对于中空球状Fe粉中添加Cu粉末经过压制烧结制备的Fe基多孔材料，随着Cu含量的增加，多孔材料的屈服强度增加，添加石墨后，多孔材料的屈服强度反而降低。

Fe-based porous material , whose yield strength increases with the increase of the content of Cu , and more than pure Fe porous material , prepared by hollow ball Fe powder and Cu powder , add graphite , the yield strength of porous materials instead of lower .

金属有机骨架（MOFs）材料是一类具有广阔应用前景的新型多孔材料，特别是在催化剂、传感器和气体储存等领域。

As a new type of porous materials , metal-organic frameworks ( MOFs ) have several potential applications in the areas of catalysis , sensors , and gas storage .

本文综述了太阳能电池、ZnO薄膜及模板法合成多孔材料的发展，研究了NPC太阳能电池中n-电极ZnO多孔薄膜的模板法制备，探讨了由其组成的电极的电池性能特征。

In this paper , developments of solar cells , ZnO films and other porous materials prepared by templating method were reviewed . Several templating methods were applied to fabricate ZnO porous films for n-electrode of NPC , and main structure and performances of the ZnO porous films were discussed .

目的比较DL-PLA、20%β-TCP/DL-PLA制成的三维多孔材料降解特点，选择有利于骨缺损修复的材料。

Objective To select a better bone repair material to heal bone defect between DL-PLA and 20 % β - TCP / DL-PLA which were prepared as 3-D porous .

多孔材料的材质为SiC、SiC/Si、SiC/C、SiC/MoSi2、SiCN、BN等非氧化物陶瓷。

As for the composition of the porous materials , 6 kinds of non-oxide ceramics were investigated : SiC , SiC / Si , SiC / C , SiC / MoSi_2 , SiCN and BN . Template technique is the key point in the fabrication of ordered macroporous materials .

在过去的几十年间，一系列的多孔材料如金属有机骨架（MOFs），共价有机骨架（COFs），共轭微孔骨架等被合成出来，并且它们的气体存储性质被详细研究。

In last decades , a series of porous have been synthesized such as metal-organic frameworks ( MOFs ), covalent organic frameworks ( COFs ), conjugated microporous frameworks ( CMPs ) and their gas storage properties were investigated .

这种新的研究方法对多孔材料热物性研究有一定指导意义。

This new method for calculation is significant for porous material .

铝基、钛基柱撑蒙脱石纳米多孔材料的研究

Study on the Porous Nano - Materials of Al-and Ti-Pillared Montmorillonites

高热流密度激光作用下含混多孔材料的传热传质分析

Heat and mass transfer analysis of porous materials under laser irradiation

聚丙烯酸钠/尿素多孔材料的制备与吸湿性能

Preparation and Moisture Absorption Properties of PAA / U Porous Material

建立了建筑屋面在铺设湿多孔材料条件下一种接近实际情况的非稳态新传热模型，新模型既考虑了温度，又考虑了湿度的影响。

In this model both temperature and humidity conditions all are considered .

机械加工对烧结金属多孔材料孔隙的影响

Effects of Mechanical Process on Pores of Sintered Porous Metal

多孔材料化学：从无机微孔化合物到金属有机多孔骨架

Chemistry of Porous Materials : from Microporous Inorganic Solids to Metal-organic Frameworks