溶剂型涂料

  • 网络solvent based coating;Solvent coating;solvent-thinned coatings
溶剂型涂料溶剂型涂料
  1. 传统的溶剂型涂料在喷涂时需大量的快挥发有机溶剂,其在喷涂过程中挥发进入大气,严重地污染了环境。

    Traditional solvent based coating needs a lot of quick volatile organic solvent which is volatile into the atmosphere as spraying , so it pollutes environment badly .

  2. [结论]室内装潢涂料的毒性:溶剂型涂料大于水性涂料,且毒性大小与涂料中的TVOC含量有关。

    [ Conclusion ] Toxicity of the organic solvent coating is higher than that of the aqueous coating , and was related to the TVOC values .

  3. 又因为溶剂型涂料中的有机挥发物(VOC)对大气的污染。

    And because of the volatile organic compounds ( VOC ) in the solvent-based coatings is polluted to the atmosphere .

  4. 近些年来,随着人们对环境保护的日益重视和环保法规的逐渐加强,世界上各国对于传统的溶剂型涂料中所含有的挥发性有机物(VOC)的排放越来越加以限制。

    In recent years , with people increasingly attach importance to environmental protection and environmental regulations have been gradually strengthened , the emission of volatile organic compounds ( VOC ) from traditional solvent-based paints has been limited in the world .

  5. 白炭黑消光剂在溶剂型涂料中的应用

    The application of fumed silica matting agent in solvent based coatings

  6. 钛白粉在溶剂型涂料中分散性的研究

    Dispersed Research In the Solvent Type Coating of Titanium Dioxide

  7. 流变增稠剂对溶剂型涂料黏度的影响

    Influence of Rheological Thickeners on Viscosity of Solvent Coatings

  8. 铸造用无溶剂型涂料的研究

    Investigations and Applications of No-Solvent Foundry Powder Coatings

  9. 凹凸棒土在高颜基比溶剂型涂料中的应用

    The use of attapulgite in the high P : B ratio solvent - based coatings

  10. 溶剂型涂料生产过程危险有害因素分析及安全对策

    Dangerous and harmful factors in the manufacturing of solvent-borne coatings and the countermeasures to them

  11. 粉末涂料与溶剂型涂料形成锤纹的机理不同。

    The hammer tone - forming mechanism of powder coatings is different from that of solvent-based paint .

  12. 非完全汽化气相色谱法测定溶剂型涂料中的微量苯、甲苯、二甲苯

    Determination of trace amounts of benzene , toluene and xylene in solvent paint by GC with incomplete vaporization

  13. 环境污染问题已成为亟待解决的问题,其中大气污染更是困扰着人们,而传统的溶剂型涂料喷涂向大气排放大量的有机物气体,严重地污染了环境。

    Environmental pollution has become the problem needed to be solved urgently , atmosphere pollution puzzled people even more .

  14. 醇溶性丙烯酸酯树脂是区别于传统溶剂型涂料树脂和水性树脂的一种新型的环境友好型涂料树脂。

    Alcohol-soluble acrylic resin is a new type of environmentally friendly coating resin that be different from traditional solvent-based coating resins and water-based resin .

  15. 前言:概述了凹凸棒土在高颜基比溶剂型涂料中的应用与对比,结果表明可改善溶剂型涂料的储存沉淀性,并对油漆光泽和粘度影响也不大。

    The result of the study is : precipitation in storage was improved , less influence on the viscosity of the coatings and gloss of the film .

  16. 随着环保法律法规的健全和人们环保意识的加强,溶剂型涂料的使用范围受到限制。

    With the restriction of environmental law and the improvement of people ' conception of environment protection , the usage of solvent polyurethane has been limited a lot .

  17. 研究开发采用黑色防腐蚀水性涂料替代汽车黑漆件涂装用的有机溶剂型涂料,实现汽车涂装的低公害化。

    A black water borne corrosion protective coatings has been developed to replace the traditional solvent-based black paints , to realize the low pollution during the car painting process .

  18. 本文着重介绍和评述了高固含量溶剂型涂料、水基涂料、液体无溶剂涂料等的性能、应用和发展前景。

    The performances , applications and perspectives of vairous coatings including high solids solvent borne coatings , powder coatings , water borne coatings and liquid solventless coatings are reviewed .

  19. 介绍了几种流变增稠剂的性能特点及其在溶剂型涂料中的作用,阐述了流变增稠剂对涂料黏度及触变性的影响。

    The performance features of several kinds of rheological thickeners and their applications in solvent coatings are introduced . The influence of rheological thickeners on the viscosity and thixotropy are described .

  20. 随着聚合技术的发展,水性涂料的性能正在接近或达到溶剂型涂料的性能,因而成为今后涂料发展的主要趋势。

    With the development of polymerization technology , the performance of water-borne coating is close to or equal to the performance of traditional coating using organic solvent served as dispersing medium .

  21. 从钛白粉表面性质出发,研究了钛白粉在溶剂型涂料中的分散机理,分析了影响钛白粉分散性的因素和提高分散性的途径。

    From the surface performances of TiO 2 , this article discusses the mechanism of dispensing of TiO2 in solvent coatings , analyses the fact of influencing dispensability and the improving methods .

  22. 从高固体分涂料与常规溶剂型涂料的差异入手,分析了高固体分涂料涂膜流挂、橘皮、抽缩、缩孔等表面缺陷的成因。

    Basing on the difference between high-solid coatings and traditional solvent-borne coatings , it analyzes the reasons of film surface defect forming such as sagging , orange skin , casing and cratering and etc.

  23. 用本方法测定溶剂型涂料中的汞,回收率为94.4%&101.0%,相对标准偏差为3.62%。

    The proposed method has been applied to the determination of mercury in solvent coatings with satisfactory results . The recovery is 94.4 % - 101.0 % , and the relative standard deviation is 3.62 % .

  24. 进入21世纪以来,世界能源危机日益加剧,各国对节能减排战略日益重视,颁布了关于涂料的各项环保法规以限制传统溶剂型涂料的应用。

    Since entering the 21st century , with the Growing world energy crisis and the growing national emphasis on energy conservation strategies , many regulations have been enacted to limit the application of traditional solvent-based coatings .

  25. 一般溶剂型涂料和水性涂料使用消光剂来获得低光泽或亚光效果,但对100%UV固化涂料体系,因固化时涂膜收缩很少而使其消光相当困难。

    The commonly used solvent based or waterborne coatings are using matting agent for low gloss or matting coatings , But 100 % UV curing coatings is difficult for its matting because of its less shrinkage during curing process .

  26. 超临界CO2为溶剂型丙烯酸涂料快挥发性溶剂喷涂的初步研究

    Elementary Study on Solvent Based Acrylic Acid Coating Spraying Using Supercritical CO_2 as Quick Volatile Solvent

  27. 用聚偏氟乙烯(PVDF)树脂制备了溶剂型氟碳涂料,筛选并优化了PVDF涂料的溶剂组成。

    Polyvinylidene fluoride was used to prepare solvent base fluorocarbon coating , and the solvent constitution of PVDF coating was screened and optimized .

  28. 对溶剂型木器涂料中TDI含量测定值的不确定度进行不确定度评估,对影响不确定度的各个因素进行了分析。

    This paper evaluates the uncertainty of TDI content test value in solvent-borne wood coatings and analyzes the factors influencing the uncertainty test .

  29. 以FT-IR和粘均分子量对溶剂型醇酸涂料中醇酸树脂经超临界CO2(SC-CO2)作用前后样品进行表征。

    Alkyd with and without the action of supercritical CO_2 was studied by FT-IR and average viscose molecular mass , which insolvent type alkyd coating .

  30. 实验结果表明,该产品主要性能指标达到“溶剂型外墙涂料”的国家标准(GB9757-88),可广泛用于室内外装修。

    Experimental results show that main properties of the present product come up to the state standard GB9757-88 and can be widely used for interior and outside finish .