衬垫材料

  • 网络cushioning material;GASKET;gasket material;Backing Material;Spacer
衬垫材料衬垫材料
  1. 如果内装物有泄漏,衬垫材料或外容器的保护性能不得遭到重大破坏。

    Any leakage of the contents shall not substantially impair the protective properties of the cushioning material or of the outer packaging .

  2. 以石棉、耐油橡胶为主要原料而制成,适用于航空液动机的煤油、润滑油、润燃料油及冷气系统结合处的密封衬垫材料。

    To asbestos , oil and rubber as the main raw materials made applicable to the motives of aviation kerosene , lubricants , fuel oil and air-conditioning Run System with the cushioning material .

  3. 油井套管补贴大修技术HDPE防渗漏衬垫材料

    HDPE Leakproof - lined Materials

  4. 汽车用含胶纸板衬垫材料的研制与开发

    Research and Development of Gummed Paper Gasket Stock for Motor Vehicle

  5. 衬垫材料冲击特性测量数据的精度验证

    Accuracy verification on test data of cushion materials in shock measurement

  6. 管道气动内对口器衬垫材料筛选试验研究

    Selection and Test of Pad Materials of Pneumatic Pipe Internal Line-up Clamp

  7. 自润滑关节轴承衬垫材料摩擦学性能的研究进展

    Research Progress on Tribological Properties of Self-lubricating Materials Liner for Spherical Bearings

  8. 聚氨酯弹性体摩擦衬垫材料的摩擦特性研究

    Study on the Friction Characteristics of Polyurethane for the Friction Liner of Hoisting

  9. 导电衬垫材料的研究与发展

    The Study and Development 0f Conductive Gasket Material

  10. 因此,在填埋场衬垫材料的选择上多倾向于具有低渗透性和良好吸附性能的粘土或其他人工合成材料。

    Therefore , clay or other synthetic materials are preferred for material of liner .

  11. 手术用包扎布和衬垫材料的开发

    Development of textiles for OR coverings and pads

  12. 导电衬垫材料的应用

    Application of Conductive Gasket Material

  13. 高速铁路轨道结构弹性衬垫材料组成的正交优化

    Orthogonal optimization of Composition of a New Elastic pad Used in Track structure of High speed Railroad

  14. 在对衬垫材料进行冲击特性的实验研究时,测量所获得的波形常含有零点偏移,零点偏移的存在将对实验结果引入不可忽略的误差。

    There is usually zero shift in shock waveforms obtained in experimental study on absorption properties of cushion materials .

  15. 依赖于表面光洁度、衬垫材料和机械状况,用这些接头可以获得更慢的泄露率。

    Slower leak rates can be obtained with these connections depending on surface finishes , gasket materials , and mechanical condition .

  16. 两层或更多层的单面或双面瓦楞纸板可层叠在一起形成块状材料或衬垫材料。

    Two or more layers of single - or double-wall corrugated board may be laminated together to form blocks or pads .

  17. 分析了装药底面的衬垫材料、衬垫厚度以及载荷持续时间对装药内部等效应力的影响。

    The influences of pad material , pad thickness , and load abidance time on the stress in the grain were analyzed .

  18. 综述了国内外高密度聚乙烯防渗漏衬垫材料的品种、性能及应用情况。

    This paper has reviewed the varieties , properties and applications as well as the domestic and foreign markets of HDPE leakproof-lined materials .

  19. 该系列产品适用于不同温度、压力范围内的水蒸气、空气及油类等介质为主的设备、管道法兰连接所用的密封衬垫材料。

    It is used as the sealing on equipments , pipes , flanges contacting with the media such as water , air and oil at different temperature and pressure .

  20. 建立了摩擦系数、磨损量与摩擦温度随摆动频率和接触压力的变化趋势,探讨了摩擦温度对衬垫材料性能的影响规律,进一步提出了不同关节轴承的最佳使用工况。

    The trends of friction coefficient , wear depth and friction temperature with oscillating frequency and contact pressure were described . The effect of friction temperature on liner was discussed .

  21. 汽车用非织造复合衬垫材料的结构和隔热隔音性能研究复合陶瓷建筑用砖(不包括隔热砖和耐火砖)

    On the Structure and the Heat Insulation and Sound Insulation Capabilities of Composite Nonwoven Bolster Materials for Automobiles double ceramic building brick ( excl. heat insulating and refractory bricks )

  22. 要特别留意密封材料和衬垫材料,这些材料相当程度上决定了阀门的压力-温度额定值。

    Pay especially careful attention to the packing and gasket materials as this may limit the rating as is the case with PTFE used as the standard in Aloyco valves .

  23. 导电衬垫材料在抑制电子设备缝隙电磁泄漏中发挥了重要作用,是目前电子设备中应用最为广泛的一类屏蔽材料。

    Conductive gasket material is one of the most widely used shielding materials at present , and plays an important role on the suppression of electromagnetic slot - leakage in electronic equipment .

  24. 针对半导体散热器防振缓冲包装的要求,介绍包装衬垫材料及其尺寸的选择方法。以促进对环境无污染的“绿色材料”包装缓冲件的发展。

    Based on the requirements of cushioning packing for semiconductor radiator , a method is introduced in the selection of packing lining material and its dimensions to promote cushioning packing which is pollution free .

  25. 本文基于摩擦学系统的观点,对多绳提升机摩擦衬垫材料的特性进行了试验研究.指出:只有依据摩阻材料所在系统的系统特性对其进行研究,研究结果才具有实际意义。

    This paper carried out the experimental research on tribology characteristics of friction lining material of multi-rope friction winder , and point out that it has not actual significance , unless friction resistance material are researched according to the material system characteristics .

  26. 要特别注意密封材料和衬垫材料,这些材料相当程度上决定了阀门的压力-温度额定值汽车用非织造复合衬垫材料的结构和隔热隔音性能研究

    Pay especially careful attention to the packing and gasket materials as this may limit the rating as is the case with PTFE used as the standard in Aloyco valves . On the Structure and the Heat Insulation and Sound Insulation Capabilities of Composite Nonwoven Bolster Materials for Automobiles

  27. 垃圾填埋场衬垫土壤材料对Cr(Ⅵ)的吸附特性研究

    Adsorption of Cr ( ⅵ ) onto landfill liner-soil materials

  28. 本文合成了一种可用于高速铁路轨道结构的弹性衬垫新材料。

    In this paper , a new elastic pad used in track structure of high speed railroad is synthesized .

  29. 混合土(粉质黏土与疏浚土)作为填埋场衬垫系统材料的试验研究

    Properties of Mixed Soil ( Silty Clay and Dredged Soil ) Used as Impermeable Materials in Clay Liner of Landfill

  30. 纸浆模塑包装制品是新兴的绿色包装材料,因为其可以自行降解及回收利用的性能,逐渐取代发泡塑料成为主要的包装衬垫缓冲材料。

    Pulp molded packaging products is new green packaging materials , and replaces the foam plastic liner as a major buffer packing materials gradually because it can be degraded by itself and recycled .