链形

接触网弹性链形悬挂的弓网关系检测

Inspection of Pantograph and OCS Relation of Spring Type Chain Suspension OCS

链形结构的蓝牙分散网拓扑构成算法与性能仿真

Chain structure Bluetooth scatternet topology formation algorithm and performance simulations

基于链形系统的关联网络DEA模型：以我国14家商业银行为例

Relational network DEA model based on series system : Application of 14 commercial banks in China

一种用LC链形回路过渡过程求均匀传输线波过程的分析方法

A method of wave process analysis of uniform lossless transmission line by using LC chain loop transient state

在规模报酬可变的假设条件下，构建了链形系统的关联网络DEA模型。

A relational network DEA model is developed in this paper under the assumption of variable returns to scale .

在本文中，使用了一类过约束机构&平面双链形连杆机构（DoubleChain）来构造新的可展式结构。

In this dissertation , we explore the possibilities of constructing new deployable structures using a family of over-constrained mechanisms named planar Double Chain linkages with only revolute joints as basic elements .

4章基于Farrell技术效率思想，提出了链形系统DEA效率评价方法。

According to Farrell theory , Chapter 2.4 tables a proposal to appraise a chain-like system 's DEA efficiency .

实验结果表明，在超声场作用下，可以有效强化碳化反应，缩短反应时间，得到立方晶形或链形、粒径为30～40nm且粒度均匀的轻质碳酸钙。

The result shows that under the ultrasound , the carbonation reaction can be strengthened and the reaction time can be shortened . The cubic or chain light calcium carbonate with the well-distributed particle size of 30 ~ 40 nm can be obtained .

链形网络的一种解法

A Method of Solving Ladder Network Problem Shape Shadow

均匀链形网络分析&Z变换的应用

Uniform chain network Analysis-An application of Z transformation

弹性链形悬挂锚段关节过渡跨吊弦长度的计算

Calculation of Dropper Length in Transitional Span of Overlapping Section in Stitched Chain Suspension

接触网全补偿链形悬挂5跨锚段关节过渡跨吊弦计算模型的探讨

Research on Computation Model of Transition Stride Hanger of 5-stride Overlap with Auto-tensioned Catenary Equipment

链形网络等效电阻的讨论

Discussion of Chain-Like Network Equivalent Resistance CHAIN OF TESTS OF SERIES Chain of Immunology Shape Shadow

应用此软件分析了简单链形悬挂、弹性链形悬挂以及双链形悬挂的振动特性，并进行了相互间的比较分析。

The dynamic performance of simple catenary , stitched simple catenary , and heavy compound catenary have been studied and compared by using this software .

同时引证了基本节对称的均匀链形网络解答的通常形式是本文的特殊情况。

In addition to this , the general form of solutions for uniform chain network with a basic symmetrical nodes has been given as special cases .

同时，本文还在研究链形系统效率和子系统效率关系的基础上，定义了关联指数，用以刻画子系统间相互协调、相互合作产生的组织效应和结构效应。

Meanwhile , connection index is defined to describe effcets of the cooperation among subsystems , based on the relationship of system efficiency and those of subsystems .

实验结果验证链形机器人具有较强的越障能力，能爬越楼梯；环形机器人具有高速及路面适应能力强的特点。

Experiments verify that the chain-shaped robot has a strong obstacle-climbing capability , and can climb stairs ; and that speed and adaptability of the loop-shaped robot are good .

提出了一种新的链形结构的蓝牙分散网拓扑构成算法：所有蓝牙节点均以0。

A novel chain structure Bluetooth scatternet algorithm for topology formation was presented : all Bluetooth nodes turn into INQUIRY or INQUIRY SCAN states with identical probability , 0 .

从这个角度看，任何一部小说都是一个复杂的由重复、重复中的重复、以链条的形式与其它重复形成链形联系重复组成的编织体。

From this point of view any novel is a complex tissue of repetitions and of repetitions within repetitions , or of repetitions linked in chain fashion to other repetitions .

根据传统的悬链线方程计算锚泊系统悬垂线的静力分析，计算出基本链形及张力，作为集中质量法分析计算的基础。

According to traditional catenary theory the paper analyzed the static force of the mooring system , we may compute a basic chain form and tension , which are the motive analysis calculation foundation of Lumped Mass Method .

通过实例论述了十字头倾斜的原因及对柱塞泵工作造成的影响，提出了计算确定往复式柱塞泵传动链形位精度的方法。

This article discusses by way of example the causes of crosshead tilt and the influence on pump operation , and presents a method for calculating the accumulated form - and position-accuracy of the driving parts on the reciprocating plunger pump .

理论建模方面，基于平均风速的静态计算法分别对简单自由悬挂和全补偿链形悬挂的风偏理论公式进行了推导，考虑沿跨长方向吊弦动态作用力变化对风偏理论模型进行了修正。

Theoretically , sag and wind-deviation of free hanging system and full-compensated chain suspension system were deduced according to statical calculation based on averaged wind velocity . The wind-deviation theoretical model was modified considering the dynamic dropper reation force along the span .

五轴铣床运动链构形方案分析

Analysis on the Kinematic Chain Configuration Scheme of Five-axis Milling Machine Tool

非标链轮齿形的数控切割加工

Processing the Nonstandard Shape of Chain Gear by Numerical Control

BCI-代数链复形的同调代数

The homological algebras of chain complexes of BCI-algebras

锯链齿形参数对锯切性能的影响

The influence of filing angles and depth gauge setting of saw chains on cutting performance

Z2对称量子链的共形场理论

Conformal field theory of Z2 symmetric quantum chain

基于Dixon析配法的平面三回路基本运动链装配构形求解

Configuration Analysis of Planar 3-loop Mechanism Based on Dixon Resultant Method

含临界－非临界面的量子Ising链与共形不变性

The Quantum Ising Chain with Critical-off-Critical Interfaces and Conformal Invariance

齿形链链轮齿形的修正与动力学仿真

Profile Modification and Dynamic Simulation of Sprockets with Silent Chain