ECAP

Of all the SPD methods , ECAP ( Equal Channel Angular Pressing ) and HPT ( High Pressure Torsion ) are most intensively utilized and investigated .

在常用的强塑性变形方法中，等通道转角挤压和高压扭转法是为材料学家使用和研究最多的两种方法。

The effect of press temperature on ECAP process of Cu-25.04 % Zn-3.83 % Al-0.2 % Zr ( wt % ) shape memory alloy , microstructure and mechanical property ware studied .

研究了挤压温度对CuZnAl形状记忆合金等通道转角挤压（ECAP）过程的影响以及挤压后合金组织和性能的变化。

The Study on 3-D Finite Element Simulation and Experiment Method for ECAP

等径通道挤压三维有限元模拟及试验方法研究

Research of ECAP and Controlling of Material Microstructure and Property

ECAP工艺与材料组织性能控制的研究

ECAP process is investigated by using numerical simulations and experimental studies in this paper .

本文通过数值模拟分析与实验研究相结合的方法开展对ECAP工艺的研究。

Simulation and Analysis of ECAP Method for Grain Refinement

ECAP细化晶粒法的仿真与分析

Simulation of Strain / Stress field in ECAP processed pure aluminium

ECAP条件下纯铝的应变行为模拟研究

Manufacture and Mechanical Properties of Ultrafine Grain Aluminum Alloy by ECAP

采用ECAP制备亚微晶铝合金及其力学性能

Investigation of Effect of Tensile Property and Fracture Behavior of Pure Aluminum during ECAP

ECAP对纯铝拉伸性能和断裂行为影响的研究

Microstructure and Properties of Commercial Pure Titanium Processed by ECAP at Room Temperature

工业纯钛室温ECAP变形的组织和性能

This paper studies pure copper 's deformation behavior of the ECAP - Conform .

本文研究了纯铜在连续等径角挤压变形过程中的变形行为。

Processing route is a very important fact of grain refinement in ECAP besides temperature .

发现除变形温度外，变形方式也是ECAP变形中晶粒细化很重要的一个因素。

Study on Mechanical Properties of Ultra-fine Grained Pure Ti Processed by ECAP

ECAP制备超细晶钛的力学性能研究

Microstructure and mechanical properties of submicrometer 7050 aluminum alloy prepared by ECAP

ECAP制备的亚微米7050铝合金的力学性能和微观结构

Influence of Hot ECAP and Heat Treatment on Microstructure and Properties of Nano-Metals

热挤压及热处理对等通道挤压法制备纳米级金属组织和性能的影响

Study on the Microstructures and Properties of Pure Aluminum L2 Processed by ECAP

ECAP纯铝L2的组织与性能研究

ECAP deformation is new approach for fabricating high performance magnetic materials with high material utilization and low production cost .

ECAP变形为制备利用率高、成本低的高性能磁性材料提供了一种新途径。

Deformation Behavior of Al-Ti-B Master Alloy during ECAP Process

铝-钛-硼中间合金在等径角挤压过程中的变形行为

Equal channel angular pressing process ( ECAP ) of pure Al (ⅰ) & microstructure evolution

纯铝等径角挤技术（Ⅰ）&显微组织演化

XRD data indicate that this ECAP processing causes the XRD peaks to broaden .

XRD数据显示ECAP加工增加了织构并使衍射峰变宽。

The results show that ECAP deformation has a stable texture when shearing deformation is continuously increasing .

结果证明当剪切变形量不断增加时ECAP变形存在一个稳定织构。

Case study of ECAP rules of arithmetic logics and component types used to logging formation evaluation are made .

给出了测井储层评价算法逻辑的ECAP规则表示事例和测井储层评价的组件类别划分，以及基于ECAP规则的分层应用程序的运行机制描述。

Grain - Refining Mechanism of ECAP and Its Effect on Microstructures and Mechanical Properties of Pure Al

ECAP细晶机制及对纯铝显微组织和力学性能的影响

2224 Aluminum Alloy Modification by ECAP Combined with Heat-treatment

ECAP结合热处理工艺改性2224铝合金

ECAP decreases the yield strength of recrystallized steel .

超大塑性变形（ECAP）会降低奥氏体不锈钢完全再结晶后的屈服强度。

The equivalent strain pattern and deformation uniformity of strain behavior of pure copper in case of ECAP

ECAP条件下纯铜应变行为的等效应变规律及变形均匀性

The increase of ECAP pass number has no effect on grain size , however homogeneity can be improved .

增加ECAP道次对完全再结晶后的晶粒尺寸影响不大，但略微增加晶粒尺寸的均匀性；

Electrochemical Corrosion Behavior of Super-hard Aluminum Alloy Deformed by ECAP

ECAP变形后超硬铝合金的电化学腐蚀行为

Research on the ECAP Grain Refining Technology , Superplasticity and Isothermal Compression Technological Parameters of 1933 Alloy

1933合金的ECAP细晶化工艺、超塑性及等温压缩工艺参数研究

Influence of ECAP Routes on the Microstructure and Properties of CP-Ti at Room Temperature

变形方式对工业纯钛室温ECAP组织及性能影响