dynaform
- 网络教程;关于成形分析;板料成形数值分析软件;我做的消声器外罩分析
-
Quick Design of Deep Drawing Parts Die Based on DYNAFORM Platform
基于DYNAFORM平台的深拉伸件模具的快速设计
-
Braking Shell First Drawing Process Simulation Based on DYNAFORM and Die Design
基于DYNAFORM制动壳体件首次拉深成形仿真及模具设计
-
Application of Dynaform Numerical Simulation in Automobile Covering Parts Forming Process
DYNAFORM数值模拟技术在汽车覆盖件成形中的应用
-
The Numerical Simulation of Blank Hold Force of Cylinder Part Drawing Based on Dynaform
基于Dynaform的圆筒件拉深压边力数值模拟
-
Numerical Simulation Research for Hole-flanging Based on DYNAFORM Software
基于DYNAFORM的圆孔翻边数值模拟研究
-
Simulation and Analysis on wrinkling behavior of square box part in deep drawing based on DYNAFORM
基于Dynaform的方盒形件拉深起皱情况模拟分析
-
So in this paper finite element simulation software eta / Dynaform is applied in the study .
因此在本文中有限元板料分析软件eta/Dynaform被用于进行差厚拼焊板的成形性研究。
-
Numerical Simulation on Wrapping of Self-Lubrication Bearing Bush Based on DYNAFORM
基于DYNAFORM的自润滑轴套卷制成形的数值模拟
-
Stamping simulation of automobile lining panel based on Dynaform
基于Dynaform软件的汽车内衬板冲压成形模拟
-
Magnetic deformation process of sheet material conical parts simulated with the FEA software Dynaform .
利用Dynaform有限元分析软件对锥形件电磁成形板坯变形过程进行了模拟。
-
Widely adopting testing data and applying DYNAFORM to simulate bend and Spring Back of sheet .
采用更广泛的试验数据,运用DYNAFORM软件对薄板弯曲成形和回弹的数值模拟。
-
DYNAFORM , a professional stamping software developed by ETA CO.
简要介绍了美国ETA公司开发的专业冲压仿真软件DYNAFORM。
-
Finally , using the software DYNAFORM simulated a practical problem , to further validate spring-back curve .
最后,应用软件DYNAFORM模拟了实际问题,进一步验证了由三次样条曲线算得回弹曲线。
-
The stamping process of the tailor-welded blank was simulated by DYNAFORM software .
用DYNAFORM软件对拼焊板成形过程进行有限元模拟研究。
-
Research on blankholder methods of tailor-welded blanks in stamping based on dynaform
基于Dynaform的拼焊板冲压成形压边方法研究
-
The multi-stage forming optimize based on Dynaform
基于Dynaform的多次拉深工序优化设计
-
The finite element model was established for numerical simulation of stamping drawing with numerical simulation software ETA / DYNAFORM .
利用数值模拟软件ETA/DYNAFORM,建立冲压仿真有限元模型,进行冲压拉延仿真数值模拟。
-
With the FEM software eta / Dynaform various forming condition were simulated in square box deep drawing process .
应用FEM软件eta/Dynaform进行了大量的方盒形件模拟拉深试验。
-
Prediction of Stamping Process with DYNAFORM
用DYNAFORM软件预测冲压工序
-
Press ( down ) the accelerator of a car Stamping simulation of automobile lining panel based on Dynaform
踩(下)汽车的油门基于Dynaform软件的汽车内衬板冲压成形模拟
-
Next the process is analyzed and optimized by adjusting the shape of blank with dynaform . The best results are gained .
接着利用Dynaform软件分析板料成形过程,通过调整板料形状,对拉深件的成形进行优化得出最佳结果。
-
In this paper , the relation of springback simulation and mesh size is studied with DYNAFORM software , and the relative results are worked out .
本文就DYNAFORM软件中单元尺寸与回弹模拟计算的关系进行了研究,得出了相应的结论。
-
A numerical simulation on the drawing process of front-end panel in a TOYOTA car is conducted in the paper , using ETA / DYNAFORM software .
结合丰田轿车前围板拉延成形过程的数值模拟,探索了轿车覆盖件拉延成型数值模拟的一般过程。
-
The soft ware package of DYNAFORM / LS-DYNA on the basis of none linear explicit calculation method is adopted in the process of press numerical simulation .
本文所有的冲压数值模拟工作均采用了以非线性显式算法为基础的DYNAFORM/LS-DYNA软件包实施完成。
-
The numerical simulation of drawing process for car 's taillight pedestal is studied by using the three-dimensional sheet metal forming analysis and non-linear explicit algorithm software Dynaform .
采用基于动力显示算法的板料成形非线性有限元分析软件Dynaform对某轿车后灯座的拉深成形过程进行了数值模拟仿真。
-
At last , a real TWB part , the center pillar of car door was simulated by eta / Dynaform and according to its simulation results designed the die .
在本文的最后,分析了拼焊板零件的一个实例。这个零件是某轿车的中立柱加强件,应用eta/Dynaform进行了分析,设计了合理模具,减少了试模时间。
-
By analyzing the automobile filler box forming process feature , using the finite element software Dynaform based on explicit algorithm , the forming process has been analyzed , the rational forming process determined .
通过对加油口冲压成形特点进行分析,并采用基于动力显示算法的有限元分析软件Dynaform,对加油口成形工序进行了数值模拟,确定了合理的成形工艺方案。
-
At the same time , using simulation results of Dynaform to analyse stress and strain distributing of metal in the forming process , and gains curves of forming load in the different cases .
同时利用Dynaform的模拟结果,分析了金属成形过程中的应力、变分布,得到了不同情况下的成形载荷曲线。
-
According to the gridding test of drawing in the teaching of stamping , by sheet metal forming simulation software Dynaform , the whole drawing process of cylinder parts has been simulated .
根据冲压课程教学中的拉深网格实验,采用板料成形数值模拟软件Dynaform对圆筒形零件拉深工艺过程进行了模拟,并将模拟结果与理论压边力和物理实验结果进行了比较。
-
The bending and springback process of auto battery holder have been simulated by applying the dynamic explicit-static implicit united solving function of non-linear FEM of DYNAFORM .
本文利用Dynaform板料成形软件的动态显式与静态隐式联合求解功能,模拟了汽车电瓶支座冲压弯曲成形和卸载回弹变形整个过程。