首页 / 词典 / good

fdm

  • 网络频分多路;熔融沉积制造;熔融沉积成形;熔融沉积造型;熔融堆积成型
fdmfdm
  1. Prototype warp deformation in the FDM process

    熔融堆积成型中的原型翘曲变形

  2. Design Considerations for FDM Optical fiber Transmission Systems

    频分多路光纤传输系统的设计考虑

  3. The Study on the Important Technologic Parameters and Their Control of FDM System

    FDM系统的重要工艺参数及其控制技术研究

  4. Stability Analysis of an Excavation Slope Based on Strength Reduction FDM

    基于强度折减法的高边坡稳定性分析与设计

  5. Research on Analog Video Secure Transmission System Based on FDM

    基于频分复用的模拟视频安全传输系统研究

  6. A Research on Characteristics of Square Coaxial Lines by FDM Method

    有限差分法求解方同轴线的特性

  7. So it is significant to research and develop the FDM device .

    因此,研究和开发国产化的熔丝沉积快速成形设备具有重要的意义。

  8. The Adhesive Mechanism and Thermal Analysis of Fibers in the FDM Process

    FDM工艺过程中丝材的粘结机理与热学分析

  9. Design and Realizing of the Temperature Control System for FDM Device Based on Fuzzy-PID

    基于模糊-PID的FDM设备温度控制系统设计与实现

  10. Analysis on Influence Factors of Extrusion Filament Process of FDM

    FDM工艺出丝过程影响因素分析

  11. Online Control Model for Coiling Temperature of Hot Strip Based on FDM

    基于有限差分算法的带钢卷取温度在线控制模型

  12. Application of FDM Method in the Numerical Simulation of Square Coaxial Lines

    有限差分法在方同轴线仿真中的应用

  13. FDM Rapid Prototyping Play an Important Role in the Enterprise

    FDM原型系统在企业中的作用

  14. Analysis of the driving force by friction in a driving structure of FDM

    FDM工艺送丝驱动机构的摩擦驱动力分析

  15. Based on the study of polymer performance , the special performance that used in the FDM .

    在高聚物材料性能研究基础上,阐释了熔融沉积成型工艺所要求的材料的特殊性能。

  16. Accuracy analysis and taguchi experiment design of FDM technology

    FDM工艺精度分析与正交试验设计

  17. The finite differential method ( FDM ) is used to calculate the temperature field .

    在计算温度场的过程中引入了有限差分法(FDM)。

  18. A new generation of prototyping system - FDM 1650

    新一代快速成型系统&融积成型系统FDM1650

  19. Study on the Technique of Variable dimension mesh in FDM

    有限差分问题中的变网格技术

  20. Performance of an Optical FDM Transmission System with an EDFA

    使用光纤放大器的频分复用光纤传输系统

  21. Research for the Post Processing of Solidification Simulation Based on Difference Mesh in FDM

    基于有限差分网格的凝固模拟后处理研究

  22. This paper describes the algorithm of force distribution method ( FDM ) for geotechnical analysis .

    提出了一种岩土工程计算的新方法,即力分配方法。

  23. It is necessary to define a file format suitable for FDM system .

    必须定义一种适应于FDM快速成形系统离线加工的文件存储格式。

  24. Study on Numerical Simulation of Thermal Stresses During Casting 's Solidification Process Based on FDM

    基于有限差分法的铸件凝固过程热应力场数值模拟的研究

  25. Research on Some Key Technologies of FDM Rapid Prototyping

    FDM快速成形中若干关键技术研究

  26. A Numerical Simulation of FDM Influenced by Scanning Type

    扫描方式对熔融挤压快速成型影响的数值模拟

  27. It will make a base for the future FDM delivering filament system .

    这也为将来的FDM进丝系统改进打下了基础。

  28. RP technology of FDM and application with reverse engineering

    FDM快速成型技术及与反求工程的结合应用

  29. An algorithm of automatic support generation of FDM based on linescan

    基于直线扫描的FDM支撑自动生成算法

  30. A New TDM Frequency Stabilization Scheme for FDM Optical Sources

    频分复用光源的一种新的时分复用稳频方案