main amplifier

Overview of main amplifier power conditioning for the laser fusion

激光聚变主放大器能源系统述评

Clock recovery circuit is used to extract clock from the output signal of main amplifier .

时钟恢复电路（CRC）从主放大器输出数据信号中提取出时钟信号供数据判决和后续电路使用。

The Quality Index Analysis of Main Amplifier and User Amplifier in Different Condition

干线放大器和用户放大器在不同使用条件下质量指标分析

Study of a Small Dimensions Main Amplifier

小型化主放的研制

Discussion on the zero correction circuit of main amplifier

主放校零回路有关问题的探讨

The main amplifier demands a high rapidity in AGC .

主放对自动增益控制快速性要求很高。

Main amplifier is used for amplifying the output signal of preamplifier into digital voltage level .

主放大器把前置放大器的输出信号放大到数字逻辑电平，并且保持数字电平的恒定，以实现限幅的功能。

Investigation of Parasitic Oscillation in Main Amplifier of the Facility SHENGUANG ⅱ

神光－Ⅱ实验装置主放大器中寄生振荡的研究

The Design of the Auto gain Program Controlled Main Amplifier in the Sysem of the Submarine Laser Communication

SLC系统中自动增益程控的主放设计

Main amplifier in programmability chip 's apply

利用可编程芯片设计的主放大器

Theoretical and Experimental Study on the Key Techniques of Main Amplifier in High Power Master-Oscillator Power-Amplifier Fiber Laser Source

高功率主振荡功率放大光纤激光系统主放大级关键技术理论与实验研究

With this model , the residual thermal distortion of the main amplifier of SG ⅲ prototype is investigated .

利用该模型对原型装置的剩余热波前畸变进行了研究。

Modeling of Residual Thermo-optical Distortions of the Main Amplifier of SG ⅲ Prototype

神光Ⅲ原型装置主放大器剩余热畸变模拟研究

Investigation of " Shengguang - ⅱ" Main Amplifier

神光－Ⅱ主放大器的研制

Zero drift in main amplifier is one of the important factors which affects the stability and accuracy of the digital seismic data acquisition system .

零点漂移问题是影响数字地震仪的稳定性和精度的重要因素之一。

An auto Gain Control ( AGC ) amplifier or a limiting amplifier is generally used to realize the main amplifier .

主放大器有两种实现方式：自动增益控制放大器和限幅放大器。

A hybrid circuit consists of charge sensitive preamplifier , main amplifier , discriminator and shaping circuit was described .

介绍一种由电荷灵敏前置放大器、主放大器、甄别器、成形电路所组成的一体化电路。

Hardware parts including : Power circuit , Pre-amplifier , Right leg drive circuit , filter circuit , main amplifier and level elevation circuit .

硬件方面主要是：对电源电路，前置放大电路，右腿驱动电路，滤波电路，主放大电路和电平抬升电路的研究与设计。

In new-model laser driver , the main amplifier which commonly has many disk amplifier mediums is multi-pass amplifier system .

新一代ICF激光驱动器的主放大器均采用多程放大结构，放大器一般由八片左右的片状放大介质级联而成。

This paper introduces the single-winding coupling transformer serving as an insulating element between the preamplifier and the main amplifier .

本文介绍单匝耦合变压器作为前置放大器和主放大器之间的隔离元件。

According to the required pulse shape by ICF experiments , the injected pulse shape of main amplifier was obtained by the method of optimum control .

针对惯性约束聚变实验对激光驱动器脉冲波形的要求，将优化控制模型理论运用于计算激光放大器输入脉冲的预补偿波形，得到了与实验基本一致的结果。

In accordance with the expected targets , the main amplifier module , the error larger modules , pre-distortion module are debugged .

按照预期的指标对主功放模块、误差放大模块、预失真模块等分别进行了调试。

The compensation amplifier consists of main amplifier and an auxiliary one . The auxiliary amplifier reduces input offset drift on output of the main one .

补偿放大器是由一个主放大器和一个辅助放大器组成，辅助放大器消除了主放大器自身的失调漂移。

Using Nd : YLF as work material of pre-amplifier in order to match the gain peak of Nd : glass used in main amplifier .

为与主放大器工作物质钕玻璃的峰值增益相匹配，采用Nd：YLF作为预放大器的工作物质。

The elementary circuit of the receiver is made up of PIN photodiode , pre-amplifier , main amplifier , automatic gain control and regeneration circuit .

光接收机的基本结构由光检测器、前置放大器、主放大器、自动增益控制电路和再生电路所组成。

The latter one was chosen to realize the main amplifier in our design since it has the feature such as simple topology , few external components and fast responsibility .

由于限幅放大器具有设计简单、功耗低、芯片面积小和外接元件少的优点，我们选择采用限幅放大器的形式来实现光接收机的主放大器。

As an example , the realization of 12 channel vertical cavity surface emitting lasers ( VCSEL ) transmitter driver , preamplifier and main amplifier are discussed .

以12信道并行垂直腔面激光器（VCSEL）光发射及接收模块为例，讨论发射模块中12通道并行VCSEL阵列驱动电路及接收模块中前置放大器和限幅放大器集成电路的实现。

Used the switched capacitor Common Mode Feedback circuit ( CMFB ) in main amplifier to achieve a large output voltage swing and decrease the static power consumption at the same time .

主放大器采用开关电容共模反馈电路在获得大输出摆幅的同时降低了功耗。

It consists of a multiwire proportional chamber , a delay line , a main amplifier , a timing single channel amplitude analyser and a time to amplitude converter .

它由多丝室、延迟线、主放大器、定时单道以及时幅变换器等组成。

We develop three kinds of charge-sensitive preamplifier and also introduce the debugging process , testing method and results . We also develop the main amplifier , pulse shaping circuits and analyze its characteristic .

总结出这类电荷灵敏放放大器的研制方法与调试经验，研制出脉冲成型放大电路并分析了C-R和R-C脉冲成型电路的特点。