unscrew
- v.拧松;(被)旋松，拧开;拧下…的螺丝
过去式： unscrewed 现在分词： unscrewing 过去分词： unscrewed 第三人称单数： unscrews
unscrewunscrew
-
1
V-ERG 拧开；旋开
If you unscrew something such as a lid, or if it unscrews, you keep turning it until you can remove it.She unscrewed the cap of her water bottle and gave him a drink...
她拧开水壶的盖子给他喝水。
-
2
VERB (旋出螺丝以)拆卸，取下
If you unscrew something such as a sign or mirror which is fastened to something by screws, you remove it by taking out the screws.He unscrewed the back of the telephone and started connecting it to the cable.
他旋出螺丝打开电话机后盖，开始动手把话机跟电话线接上。
-
You 'll have to unscrew the handles to paint the door .
要漆这扇门，你得把螺丝拧开，缷下门把手。
-
Unscrew cap on fuel level sensor .
拧开燃油油位传感器上的盖帽。
-
I can 't unscrew the lid of this jar .
这个瓶盖儿我拧不开。
-
She unscrewed the cap of her water bottle and gave him a drink .
她拧开水瓶盖，让他喝了一口。
-
He unscrewed the back of the telephone and started connecting it to the cable .
他旋出螺丝打开电话机后盖，开始动手把话机跟电话线接上。
-
The base of the lamp unscrews for wiring and mounting .
台灯的底座可以拧开来进行布线和安装。
-
He had unscrewed the caps most of the way
他已经快把螺丝帽拧下来了。
-
Unscrew the on the left and right for this purpose .
为此，旋下左右两侧的。
-
Always avoid oil leaks after unscrewing the oil inspection plug .
拧下检油塞后务必要避免机油泄漏。
-
Unscrew the two fastening screws and remove the fan control .
拧下两颗紧固螺钉并拆卸风扇控制按钮。
-
Unscrew axle and left axle end , then remove bearing .
释放轴心和左侧的轴端盖子。之后取出轴承。
-
You need to carefully unscrew the top of it .
你要小心的把它的上盖旋开。
-
Unscrew the burnt ones and replace them with the good ones .
拿下那些烧坏了的，再换上好的。
-
Unscrew service fastening screws on both sides of the vehicle .
拧下车辆两侧的维修紧固螺钉。
-
Unscrew the left and right fastening screw on the mounting .
拧下支座上的左右紧固螺钉。
-
Simply unscrew the old electrode , replace it with a new one , and calibrate !
只需拧下旧的电极，更换一个新的它，校准！
-
Unscrew transmission cross member on body .
拧开车身上的变速器横梁。
-
To become or allow to become unscrewed .
被旋下或可被旋下。
-
To do so , unscrew the two upper fastening nuts .
为此，旋下两个上紧固螺母。
-
Unscrew body halves using open end or adjustable wrench on flats provided .
采用预备好的平头上开口或可调节扳手拧下一半阀体上的螺丝。
-
Unscrew support for positive crankcase ventilation line on engine transport eyebolt .
松开发动机运输吊环螺栓上曲轴箱强制通风管路的支架。
-
Unscrew the oxygen sensor on the underside of the vehicle .
旋开车辆底面上的氧传感器。
-
Unscrew the three fastening nuts and remove the three washers .
旋开3个紧固螺母并拆除3个垫圈。
-
Unscrew fastening screws on the cylinder head and remove the tool .
拧下气缸盖上的紧固螺钉并拆下工具。
-
Unscrew stabilizer at the side parts of the rear-axle support .
拧下后轴支架侧面的稳定器的螺钉。
-
Simply unscrew the battery caps or remove the covers to check the level .
只需要拆开或者直接取下蓄电池盖，就可以检查电解液的液面高度。
-
Unscrew the two fastening screws for the light bulb .
拧下灯泡的两个紧固螺钉。
-
Unscrew ground connection from the longitudinal member .
将接地连接从纵梁上拧下。
-
Unscrew the heat shield covering the catalytic converter and the turbocharger .
旋开盖住催化转化器和涡轮增压器的隔热板。
-
Unscrew the three fastening screwson the rear power window motor .
将3个紧固螺钉从后电动车窗电机上旋下。