乳液聚合物

通过对乳液聚合物的红外光谱分析表明，UPA与丙烯酸酯发生了共聚反应。

The FT-IR analysis for emulsion polymer indicates that UPA can successfully copolymerize with acrylic monomers under given conditions .

洁净浓乳液聚合物粒子的制备

Preparation of clean concentrated emulsion polymer

烷基化纳米SiO2/MMA乳液聚合物及其对PC的改性研究

Preparation and analysis of emulsion polymer of alkylable nano-sio_2 / mma and its modifying efficiency to PC

ASA核-壳乳液聚合物的组成、结构与性能

Composition , Structure and Properties of ASA Core-Shell Emulsion Terpolymer

论述了丙烯酸系乳液聚合物设计中玻璃化温度（Tg）的预测。

This article discusses the calculation for the temperature of glass state change ( T g ) in acrylic emulsion copolymer design .

在适量第三组分配合下，炕基化纳米SiO2/MMA乳液聚合物能大幅度提高PC的韧性、加工流动性及耐热性。

In addition , PC was toughened notably , process flowability and heat resistance of PC were raised by core-shell particles of alkylable nano-silica / PM-MA with cooperation of third component .

聚乳酸膜低温等离子改性及其细胞亲和性研究低VOC含量丙烯酸酯乳液聚合物合成方法研究

Study on Modification of Poly ( Lactide ) Film by Low-temperature Plasma and Its Cell Affinity ; The Acrylic Emulsion Polymer for Processing Auto Interiors

为了增强耐久性混凝的抗盐冻腐蚀性能，选用质量稳定、耐久性能优异的SR乳液聚合物对混凝土进行改性。

On the basis of Salt for the freezing of indicators , we adjust a reasonable adjustment of gas content , in order to enhance the durability of the salt freeze coagulation corrosion , we choice the stable quality , outstanding durability of concrete SR emulsion polymer modified .

乳液聚合物输送泵机械密封的改造及应用

Revamp and Application of Mechanical Sealing of Emulsion Polymer Transportation Pump

乳液聚合物胶粘剂分子设计中的工艺过程考虑

View of Production Process for Molecular Design of Emulsion Polymer Adhesive

结构可控增韧型核-壳结构乳液聚合物的研究进展

Advances on structure-controllable core-shell structure latex polymer with toughening function

丙烯酸乳液聚合物裂解色谱/质谱研究

The study of acrylic latex polymers by pyrolysis capillary gas chromatography-mass spectrometry

种子乳液聚合物胶粒形态及胶膜结构研究

Particle Morphology and Film Structure in Seeded Emulsion Polymerization

乳液聚合物分子量愈小，涂膜光泽愈好。

The latexes with lower molecular weight tend to increase the film gloss .

交联聚合物微粒改性乳液聚合物工艺研究

Technology of emulsion polymers modified by crosslinked microparticles

较高有机硅单体改性的丙烯酸乳液聚合物具有较高的分解温度，改性后乳液的粒径比未改性时小。

The particle size of silicon-modified acrylic emulsion is smaller than that unmodified emulsion .

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶。

The styrene-acrylate polymer emulsion was synthesized by interim process 、 semi-continue process and pre-emulsification process , and was inverted into hydrosol by ammoniating reaction .

介绍了有机硅－丙烯酸酯乳液聚合物的3种制备方法及各种乳液的特点，对各种乳液的近期研究成果进行了总结。

Three preparation methods and their characteristics of organosiloxane - acrylate emulsion were reviewed with 20 references , and the recent development of these emulsion was also introduced .

对无皂微乳液聚合物在皮革化学品如无铬鞣剂、复鞣剂、涂饰剂、污水处理剂、柔软剂、助染剂等方面的应用前景进行了阐述。

Application prospect of microemulsion polymer in leather chemicals as tanning agent , chrome-free retanning agent , finishing agent , sewage treatment agent , softening agent and dyeing auxiliary was analyzed .

研究结果表明，该复合乳液聚合物为两相体系，其性能既不同于相应的无规共聚物，也有别于聚合物的共混物。

Moreover , their film formation and mechnical properties were compared . Results showed that the composite emulsion polymer obtained was a two-phase system which differed from both the random copolymer and polymer blend in properties .

在普通水泥砂浆中加入硅丙乳液配制成聚合物改性水泥砂浆（PMC），并对其性能和微观结构进行了研究。

Polymer modified cement mortar ( PMC ) was formed by adding siloxane / acrylate copolymeric emulsion in the Portland cement mortar . The mechanical properties and the micro structure of PMC were investigated .

考察了八甲基环四硅氧烷（D4）在碱性条件下的温度、pH值、反应时间以及乳化剂复配和用量、偶联剂用量等影响单体转化率、乳液稳定性及聚合物分子量的因素。

The influence of factor octamethylcyclotetrasiloxane ( D_4 ) on the monomer convert ratio , emulsion stability and the polymer molecular weight in the alkalescence condition , such as temperature , pH , reaction time and dosage of emulsifying agent and silane coupling agent were studied .

丙烯酸酯共聚物乳液混凝土中聚合物与混凝土的化学作用

The Chemical Reaction between Acrylate Copolymer and Calcium Hydroxide from Concrete

2,5-二甲氧基苯胺的乳液聚合及聚合物结构表征

The Emulsion Polymerization of 2,5-Dimethoxyaniline and The Characterization of Polymer Structure

间氯苯胺的乳液聚合及聚合物链结构表征

Emulsion Polymerization of m-Chloroaniline and Characterization of Macromolecular Chain Structure

聚氨酯环氧树脂乳液互穿聚合物网络结构与性能研究

Studies on structure and properties of polyurethane-epoxy resin latex interpenetrating polymer network

无机纳米粒子改性纯丙乳液兼具有机聚合物和无机纳米粒子两者的优异性能，有效地改善了纯丙乳液的耐水性、热稳定性和耐候性。

Pure acrylic emulsion modified by inorganic nanoparticles combines the properties of inorganic nanoparticles and organic polymer and it has improved water resistance , thermal stability and weather resistance of pure acrylic emulsion .

甲基丙烯酸封端的复合乳液生成交联型聚合物，PU的硬段和硬段间的氢键也受到破坏。

While the containing the methacrylic end group is almost fully crosslinked , there is less hard-hard segment of PU hydrogen bond in the hybrid polymer .

不饱和聚酯/苯乙烯无皂乳液共聚合与聚合物微凝胶

Emulsifier-free emulsion copolymerization of unsaturated polyester and styrene and the polymer microgels

含氟丙烯酸酯乳液水溶性聚合物复配用于纸张表面施胶的研究

Study on the composition of fluoroacrylate emulsion water soluble copolymers as surface sizing agent