刮板

guā bǎn
  • Scraper;squeegee;drawing template;washboard;clapper;strike-off board;drawing strickle
刮板刮板
刮板 [guā bǎn]
  • (1) [squeegee]∶一端有一横条的带柄工具,横条上装有皮革或橡胶片,用以在(如人行道、窗玻璃或甲板)面上布开、推开或拭去液体

  • (2) [clapper]∶用来修平新模制的砖的木板

刮板[guā bǎn]
  1. 精矿卸矿采用刮板卸矿,较传统冲洗水卸矿方式相比节水效果显著。

    Concentrated ore can be unloaded by a drawing template , so that the water-saving effect is remarkable compared with the traditional rinse water ore unloading way .

  2. 对可接受的印刷品质,刮板边缘应该锋利和直线。

    It is acceptable if the squeegee edge is sharp and linear .

  3. 基于MATLAB的重型刮板输送机参数优化

    Parameter Optimization of Heavy-duty Scraper Conveyor Based on MATLAB

  4. 用Delphi开发埋刮板输送机CAD系统

    The CAD System for Flush Type Scraper Conveyor Developed With Delphi

  5. 此外,还介绍了H形刮板的设计实践及使用效果。

    In addition , the design of H shape scraper and performance in application are also illustrated in the paper .

  6. 刮板运输机改性MC尼龙中部槽的研制

    Development of modified MC nylon middle groove in the scraper conveyor

  7. MG系列埋刮板给煤机是火力发电厂制粉系统中的主要设备。

    MG Series Buried Scraper Freeder is the major equipment used in the pulverized coal making system of power plant .

  8. 基于CFD的刮板式薄膜蒸发器工艺计算及辅助设计系统

    Process calculation and aided design system of the wiped thin film evaporator based on CFD

  9. 基于UG的刮板输送机链轮三维参数化建模

    The 3D Parametric Modeling of Chain Wheel of Flight Bar Conveyor Based on UG

  10. 提出了一种用Delphi开发的埋刮板输送机CAD系统,并给出了系统组成结构及实现方法。

    This paper presents a CAD system for flush type scraper conveyor developed with Delphi . The system structure and realization method are also presented .

  11. 磁鼓清洁刮板用新型低硬度TPU的研究

    Study on A Novel Low-hardness TPU for Cleaning Blades

  12. 给出了刮板输送机方案设计及选型信息系统业务流程图和UG模型设计加工流程图。

    This paper represents the professional diagram of scraping block conveyor scheme designing and type selecting information system and diagram of UG modern designing and machining .

  13. 新型拖链刮板翻动式(FECCTM)浸出器最新的无源光网络GPON就引入了FEC这一功能。

    New Type Extractor ( FEC CTM ) FEC is adopted in Gigabit Passive Optical Network ( GPON ) .

  14. 基于VPT的刮板输送机传动系动力学仿真与强度分析

    Dynamics Simulation and Intensity Analysis of Scraper Conveyor Transmission System Based on VPT

  15. 600MW机组刮板捞渣机液压驱动系统选型设计

    600 MW Unit Conveyor Fluid Driver Design

  16. DJ型大倾角胶带输送机与普通式输送机、斗式提升机、刮板输送机比较,其综合技术性能都非常优越。

    DJ-type inclined belt conveyor and the common conveyor , bucket elevator , conveyor compare the performance of its integrated technology is very advantageous .

  17. 关于改进40T刮板机机头与减速器联结装置的探讨

    Approach to improve in the linking device between the 40 T scraper conveyor head and the decelerator

  18. 7.63m焦炉刮板机自控系统设计

    Design of Automatic Control System for 7.63m Coking Scraper

  19. 介绍了爱立许R系列混合机,其结构特征为:旋转的混合盘,逆流式原理下工作的旋转的混合工具和静态的壁部/底部刮板(多功能工具)。

    Eirich R series mixer , characterized by its rotating mixing pan , rotating tools and static mixer , characterized by its rotating mixing pan , rotating tools and static wall / bottom scraper ( multi purpose tools ) working in counter current principle was introduced .

  20. 活板式SGW-40(80)T型刮板机机尾

    SGW-40 ( 80 ) T scraper conveyor drive end unit of looes-plate type

  21. SGW-40T双速电机驱动刮板输送机的推广使用

    Application and Dissemination of SGW-40T Scraper Conveyor with Dual-speed Motor Moving

  22. MRH-S100-41型掘进刮板运输机的改造

    Improvement on Transporter in MRH-S100-41 Type Tunneling Machine

  23. 在刮板机构运动学原理的基础上,在ADAMS模型中进行速度参数化设计研究,得出定向时间和刮板速度之间的函数关系,为此类机构的设计打下基础。

    Under the kinematics theory of slat mechanism , the parameterized speed design study is done in ADAMS model , it obtains the function expression between orientation efficiency and slat speed , and builds the foundation for designing of such kind mechanism .

  24. XGZ系列刮板输送机是80年代初期由平顶山选煤设计院设计。

    XGZ series scrapping board conveyor is designed by Pingdingshan Design Institute for Coal Preparation in the early1980s .

  25. 工作部刮板电机采用电压空间矢量脉宽(SVPWM)调速系统,不仅可以得到良好的调速效果,提高有机肥生产质量,还可以在不新增调速设备需求的情况下,提高了直流电压的利用率。

    Scraper conveyer motor uses the space vector pulse width modulation ( SVPWM ) speed regulating system . This system is not only to get well effect , but to improve utilization of direct voltage in the event that device unchangeableness .

  26. 介绍了薄煤层大功率刮板输送机SGB630/2×75H型输送机的设计及结构特点。

    The design and structure characters of SGB-630 / 2x75H large power conveyer used in thin coal seam are introduced .

  27. 最近又与有关科研单位合作对XGZ系列重型刮板输送机进行了技术改进,使该机更加完善。

    Recently we cooperated with concerned research institutes to conduct technological improvement of XGZ series heavy-duty scrapping board conveyor to perfect the product .

  28. 针对自行设计的薄膜蒸发器,以水为物料,采用大型CFD软件CFX4.4,初步探讨了刮板转速、进料量、进料温度等参量对薄膜蒸发器蒸发段长度和加热段膜内传热系数的影响。

    Based on the designed thin film evaporator , the influence of the rotor speed , feed rate and liquid inlet temperature on evaporation length and film heat transfer coefficient was primarily discussed using the software CFX 4.4 with water as feed liquid .

  29. 介绍了国产Luwa型固定刮板式搅拌薄膜蒸发器的性能及结构,目前国产化及使用情况,以及在我国推广使用的前景和效益。

    This paper introduces the performance and structure of domestic Luwa type fixed scraper stirring film evaporator , current situation of its domestication and application as well as the prospect and benefit of its popularization and application in China .

  30. 依据地质条件、综采工作面的生产能力以及配套的采煤机、刮板输送机等主要设备,确定EBH-132型掘进机机型和主要参数。

    According to geological conditions , productivity of fully mechanized coal face , as well as ancillary Shearer , scraper conveyor , and other major equipment , determine EBH-132-boring machine models and the main parameters .