可靠性评估

  • 网络reliability evaluation;reliability estimation
可靠性评估可靠性评估
  1. 基于可信度的Bayes融合方法在可靠性评估中的应用

    Application in Reliability Estimation by Bayes Fusion Method Based on Credibility

  2. 基于Bayes先验信息法的可靠性评估方法

    Reliability Estimation Methods Based On Bayes Prior Information Method

  3. IP的质量与可靠性评估

    IP Quality and Reliability Assessment

  4. 基于时变可靠度的RC梁正截面承载力可靠性评估

    Reliability Assessment on Normal Section Bearing Capacity of RC Beam Based on Time-Dependent Reliability

  5. 基于RBF神经网络的电网可靠性评估模型研究

    The study on reliability assessment of electrical power systems using RBF neural network

  6. 基于Petri网的通信网络可靠性评估建模仿真

    Evaluation of Communication Network ′ s Reliability Based on Modeling & Simulation Using Petri Nets

  7. 导弹武器系统可靠性评估的Bayes方法

    Study on Bayes Evaluation for Reliability of Missile Weapon System

  8. 提出了基于状态转移和蒙特卡洛模拟(MonteCarlosimulation,MCS)的配电系统可靠性评估算法。

    This paper presents a method for distribution system reliability evaluation based on state transition and Monte Carlo simulation .

  9. 本文提出了一种大型发输电组合系统可靠性评估的Monte-Carlo方法。

    The paper presents a Monte-carlo method for reliability evaluation of large scale composite generation transmission systems .

  10. 软件产品可靠性评估的WD模型及其性能分析

    On the software reliability model of Weibull distribution and its performance analysis

  11. net和XML技术实现了贝叶斯网络综合实验平台的构建,对上述算法加以实现,并应用到电力系统可靠性评估中,取得了比较好的效果。

    This paper also builds an integrated experimental platform for the test and further research of Bayesian Networks , and the improved algorithm is applied on the reliability assessment of power system .

  12. 电力系统可靠性评估的Monte-Carlo方法&系统状态及其转移过程的随机模拟

    Power system reliability evaluation by monte - Carlo method & stochastic simulation of power system states and state transition processes

  13. 广东500kV主网可靠性评估

    Reliability assessment of 500 kV main grid in Guangdong

  14. 为了提高机载开关电源中半导体器件并联系统可靠性评估的准确性,运用经验Bayes法和经典的统计方法,研究了该系统的可靠性评估问题。

    In order to improve the accuracy of the reliability evaluation for semiconductor parallel system , evaluated are the reliability for this system by using empirical Bayes and classical statistical methods .

  15. 因此,利用MonteCarlo模拟法可以有效地对在役的自增强圆筒进行可靠性评估。通过对Cr-Ni-Mo-V钢材进行模拟得出了一种适合于自增强厚壁圆筒的新的缺陷评定方法。

    Therefore , Monte Carlo simulative method obtained by Cr-Ni-Mo-V simulation could be used to evaluate the reliability of self-reinforcement thick wall vessel under working .

  16. 传统的配电网可靠性评估方法是故障模式与后果分析法(FMEA),但这种方法当网络规模变大时各种故障后果分析将变得十分冗长;

    Traditional evaluation method for the reliability of distribution system is a failure modes and effects analysis ( FMEA ), but it could become very verbose when applied to a complex network with overlapping outages .

  17. 本文介绍了几种新颖的微电子测试结构及其应用,诸如栅氧化物可靠性评估、薄介质层击穿以及预示MOS绝缘层的边缘效应。

    The some novel microelectronic test structure and its application is described in this paper , such as the estimation of gate oxide reliability and breakdown of film dielectric layer , as well as presage of Mos insulation layer edge effect .

  18. 通过对RBTS和IEEE-RTS79测试系统的可靠性评估,验证了灵敏度分析的有效性和正确性。

    The results tested on the RBTS and IEEE-RTS79 systems show the effectiveness , correctness and practicability of the sensitivity analysis method .

  19. 提出以负荷点为研究对象,对网络结构进行元件故障后果区域划分的故障模式及其后果分析方法(FMEA),改进了新的配电网可靠性评估算法。

    Based on the failure-mode-and-effect-analysis ( FMEA ) technique , the load-point is regarded as the analysis object , and the method of area partition of component failure-mode for system configurations which expanded the idea of reliability assessment is proposed .

  20. 针对一艘无自主动力的浮式生产储油船(FPSO)拖曳航行时的静水、波浪载荷特点,开展船体梁极限强度可靠性评估。

    The ultimate strength reliability analysis of hull girder was carried out according to the still water bending moment and wave-induced bending moment of an FPSO ( Floating Production , Storage and Offloading unit ) which has no automatic propulsion , under towing condition .

  21. 计算结果表明,拖曳航行状态下的FPSO船体梁可靠性评估不可忽略,其数据可为今后类似拖曳行为提供可靠性方面的数据支持,对于正确认识拖曳航行状态下FP-SO的可靠性水平具有现实意义。

    The result proves that the reliability analysis process of FPSO hull girder under towing condition is not neglectable and the achieved data can support database for similar reliability analysis . It is helpful to recognize the proper reliability level of FPSO under towing condition .

  22. 为改善发输电组合系统可靠性评估的计算效率,缩短评估时间,适应实时在线评估的需要,该文提出基于网流规划(NFP)的评估算法。

    In order to improve the efficiency of reliability assessment on composite generation and transmission system and shorten the assessment time to meet the demands of on-line assessment , a reliability assessment algorithm using network flow programming ( NFP ) is presented .

  23. SHM主要是通过布置在结构上的传感器,对结构工作状况进行长期的在线监测,获得桥梁在运营状态下的结构真实响应,并有效利用监测信息反演结构的状态,进而进行桥梁结构安全可靠性评估。

    The principle of the SHM system is mainly to obtain the bridge structures daily true responses on-line by sensors disposed in structures , and then deduce the state of the bridge structures by making use of those obtained information and evaluate the bridge safety and security synthetically .

  24. 应用该方法对IEEE-RTS标准系统的发电部分进行了可靠性评估,并与采用常规抽样方法和常规重要抽样方法的评估结果作了比较。

    The proposed method is applied to reliability evaluation of power generation section in IEEE-RTS test system and the evaluation results by the proposed method are compared with those by both conventional sampling method and conventional importance sampling method .

  25. 以J-M模型、G-O模型、Nelson模型为例,对物流管理系统进行了可靠性评估,实验的数据结果验证了可靠性模型改进的有效性,并且得出G-O模型更加适用于应用软件错误独立性的判别方法。

    Take the J-M model , G-O model and Nelson model as an example , an experiment about software reliability evaluation is carried on a software system called Coal Transportation Management System . The experiment result verified that improvement is valid . G-O model is more suitable to this method .

  26. 在产品具有多源验前信息的情形下,讨论冷贮备系统的可靠性评估问题,运用Kullback信息作为分布之间距离的度量,在Kullback信息的融合准则下对多个先验分布进行融合。

    Based on the Kullback information fusion method , the reliability evaluation of cold stand-by system is discussed . When product has the multiple prior sources , using the Kullback information as the distance measure of distribution , and combining the prior distribution under the fusion rule of Kullback information .

  27. 冰区海洋平台疲劳可靠性评估方法的研究

    Evaluation method for fatigue reliability of offshore platform in ice region

  28. 飞机起落架可靠性评估的一种方法

    An Approach to Reliability Evaluation of an Aircraft landing Gear System

  29. 软件可靠性评估可以估计和预计软件可靠性水平。

    Software reliability evaluation can estimate and predict reliabilities of software .

  30. 小样本成败型设备可靠性评估方法

    Reliability Assessment Methods with Small-Sample for Device with Only Safe-or-Failure Pattern