可实现性

具有可实现性的Fuzzy对称方阵的一些性质

Some Properties of Fuzzy Symmetric Matrix with Realizability

DRTMCSOILIGBT器件漂移区新结构的可实现性

Primary Exploration on Realizability of New Structures in Thinned Drift Region of DRT MC SOI LIGBT

Fuzzy关系的Sup&T可实现性

Sup - T Realizable Property of Fuzzy Relation

并在第五章使用C语言简单编写了基于WEB的报销系统的部分程序，从而验证上述设想系统的技术可实现性。

The fifthly chapter write partly program of expense system based on WEB by C # language .

该算法充分考虑了可实现性和实时性并采用现场可编程门阵列（FPGA）设计实现该算法。

With implementation fully taken into consideration , the algorithm is implemented by adopting FPGA .

最后，给出了该方法的具体实现步骤，并用MATLAB仿真验证其可实现性。

Finally , the paper gives a concrete realization of this method and uses MATLAB simulation to validate its feasibility .

最后以PCB（printedcircuitboard）质量检测为典型案例验证了所设计的软件模块的可实现性。

Finally , the practicability of the software designs is verified by taking PCB ( Printed Circuit Board ) quality testing as an typical example .

给出了SAR目标模型以及原始回波信号的时域和频域模拟方法，并分析了其精度和可实现性。

While the methods of SAR echo in time and frequency domain been presented , the precision and realization of them are analyzed .

最后，本文以一个CAD系统为特例来证实了这种混合框架的协同设计系统的可实现性和有效性。

Finally , with a CAD development system , a special case of this hybrid framework for collaborative design system can be realized and effective , which was proved .

此外，本文还对模糊自适应PID控制策略在PCC上的可实现性以及实现方式进行了分析。

In addition , this article analyzes the feasibility and way of applying the fuzzy adaptive PID control strategy on PCC platform .

并在FPGA芯片上运行系统，根据实验结果证明本文设计的系统具有可实现性。

The program of demodulation system designed is downloaded and run in a FPGA chip . The result testifies that the demodulation system designed has the possibility of implementation .

目前直接体积CT主要存在两大困难：一是如何获得三维图像精确重建所需的投影数据，包括扫描方式的可实现性；

Now the existing direct volume CT methods face two difficulties : first , how to get the projection data to reconstruct the 3D image exactly , including whether the scanning structure is practical ;

在有速度传感器矢量控制实验中，采用神经网络PI速度控制器进行转速调节，证实了控制方案的有效性和可实现性。

In the system with speed sensor , neural network PI controller was used for speed control . The experiment results verify the program is valid and feasible .

在SOMA中，服务实现处理的是架构性决策问题，它关注的是方案的模板与模式、SOA引用架构的具体内容、技术上的可实现性以及原型问题。

In SOMA , service realization deals with architectural decisions concerning solution templates and patterns , details of SOA reference architecture , technical feasibility , and prototyping .

通过系统的功率分配设计，对RoF系统的可实现性、合理性和稳定性做出必要的分析。

Necessary analysis is made of the realizability , rationality and stability of the system through the power distribution design .

采用可实现性kε模型和随机颗粒轨道模型，对其气固两相流动进行了数值计算，得出了气相速度分布、颗粒浓度分布和流动阻力分布特性。

The realizable k - ε model and stochastic particle track model were used for gas-solid flow simulation . The numerical results showed the gas velocity , particle concentration and flow resistance distributions of the gas inlet hood .

理论分析及实验结果均表明，第3种算法不仅算法描述简明高效，可实现性强，而且所得的结果数据精度也较高，是一种较为实用的SAR原始回波信号生成算法。

Both the theoretical analyses and the emulational results indicate that the third one is more practicable basing on its concise and efficient description and realizability , as well as high accuracy of its result .

综合考虑经济发展和可实现性，本研究确定河南省十二五节能目标为：到2015年时，全省的单位GDP能耗比2010年下降17%。

According to economy development and realizability , provincial energy efficiency target for 12th years is that in the end of 2015 , energy intensity will drop by 17 % in comparison with that in 2010 .

考虑到系统的可实现性，利用了增量式数字PID控制器，设计了电源板、伺服放大板和信号调理板，对硬件电路和传感器进行了标检和调试。

Considering the realization of the system , the paper adopts incremental mathematical PID controller and manufactures the power board , servo amplified board and signal processing board . And the hardware circuit and sensors are checked and debugged .

在MPSK信号的类内识别中，通过改进的高阶谱提取特征进行识别，具有更好的抗噪性和可实现性。

In the identification of MPSK signals , the features extracted from the improved higher order spectral could obtain better noise immunity and achievability .

为了验证系统的有效性和可实现性，我们设计了一个分布式算法，并且在J2EE、移动Agent和我们AT-DAS中分别给出了这个算法的解决方案。

In order to examine our system framework , we developed a distributed arithmetic , provided the solutions of this arithmetic in J2EE , mobile agent and our AT-DAS .

对转向离合器的三维参数化CAD系统从理论上研究了它的可实现性，提出了一个关于有限元分析前处理的新思路&有限元分析模型的参数化。

About the three-dimensional parameters CAD system of the steering clutch , Studying the possible implementing from the theories , put forward a new way that the concerning an analytical front handle - the limited dollar analyzes the model of parameter turn .

接着详细的研究了MSK解调器的几种解调算法，针对解调性能和硬件的可实现性等问题，对几种解调算法进行了分析比较，并对各种解调算法的性能进行了仿真。

Secondly , several demodulation algorithms are studied . Considering the performance of demodulation and implement of hardware , we simulate and compare several demodulation algorithms .

仿真研究表明相对现有典型移动MAC协议，MA-MAC极大提高了移动节点与底层传感节点之间的数据交互性能，且资源要求低、可实现性强。

Simulation shows that compared to current mobile MACs , MA-MAC greatly improves the performance of data exchange between mobile sinks and static sensor nodes .

这些应用实例表明本文提出的通用模糊Prolog方法的正确性和可实现性，对研究通用模糊Prolog系统具有一定的参考意义。

They exactly prove validity and applicability of the common fuzzy prolog approach proposed in this paper . Hence , the work above is somewhat valuable for research of common fuzzy prolog system .

从提高计算的有效性和可实现性的角度出发，通过在不同的更新阶段采用优化定界椭球（OBE）算法，提出了一种新颖的解决状态估计的方法。

A novel method based on optimal bounding ellipsoid ( OBE ) algorithmic procedure at each stage of updating is presented to improve computational efficiency and practicability .

在Matlab环境下，对于室内环境下基于点特征的二维SLAM和三维SLAM进行了仿真实验，仿真实验验证了双目视觉SLAM系统的完整性和可实现性。

For a mobile robot in indoor environment , the two-dimensional SLAM and three-dimensional SLAM simulation experiments based on point features are conducted in Matlab . The simulation results prove the integrity and realizability of the binocular vision SLAM framework .

给出了一个EDDS在建筑结构抗震选型中的应用实例，论证了EDDS的可实现性、优越性和先进性。

An example of EDDS application in aseismic building structure type choosing is presented , while its feasibility and advantages are demonstrated simultaneously .

综合逆压突扩流动和浮力各向异性的流场特征，运用颗粒群理论，引入Shih的Reynolds应力通用本构关系建立了可实现性应力代数模型。

Referring to the specificities of the flow field with anisotropic property , the group theory of particles is used and the general constitutive equation of Reynolds stress proposed by Shih is introduced to build a realizable algebraic stress model .

通过仿真分析对这两种经典算法进行性能和计算量的比较，改进后的贪婪算法与经典的Chow算法在性能上相差无几，但在复杂度和可实现性等方面则有所不足。

Through the simulation analysis and comparison of these two classic algorithm in performance and computation , we find that the performance is almost the same , but in complexity and can be carried out , the improved greedy is inadequate .