塑料模具钢

  • 网络plastic mold steel
塑料模具钢塑料模具钢
  1. 浅析塑料模具钢抛光性能的影响因素

    Analysis on the Factors Affecting Plastic Mold Steel Polishing Performance

  2. 塑料模具钢的正确使用是提高塑料模具质量的关键。

    Exactly using plastic mold steel is key of improving plastic mold quality .

  3. 介绍了开发新型模具钢的重要性,介绍了太钢生产的一些模具钢品种,重点介绍了开发出的热作模具钢A和塑料模具钢B。

    The importance of developing new die steel , and some die steel , specially hot forging die steel A and plastic die steel B produced by TISCO have been introduced in this article .

  4. 本文介绍了热力学和动力学分析预测在TRIP钢,硬质合金以及塑料模具钢研制中的应用,从而为现代先进材料的设计提供参考。

    Thermodynamic analyses , and sometimes coupling with kinetic estimation , to TRIP steels , cement carbides and mold steel for plastics are shown in the effort to designing modern advanced materials .

  5. 由于表层形成一层TiN,Ti2N,TiC等化合物层,故提高了塑料模具钢的抗腐蚀性及耐磨性。

    One layer of compounds consisting of TiN , Ti_2N and TiC was formed on the surface of these steels , which can improve the corrosive resistance and abrasive resistance of steels .

  6. 对PMS镜面塑料模具钢进行恒温超塑成形试验,并对其显微组织结构特点及其强化机制进行研究分析。

    Based on the experiments of constant temperature of S. P. F. with PMS steel of mirror , the characteristics of micro crystalline structure and its strengthening are studied .

  7. 利用PMS镜面塑料模具钢进行恒温超塑性试验,利用试验参数对话机键模进行超塑性精密成形,并对其组织结构、宏观强度及其强化机制进行了研究分析。

    Superplasticity of PMS plastic die steel at constant temperature was studied , and the superplastic precision forming , microstructure , strength and strengthening mechanisms of phone dies were analysed in this paper .

  8. 研究了新型易切削贝氏体塑料模具钢(Y82)的合金设计及性能,分析了合金元素Si、S及Ca在钢中的作用。

    The roles of the alloying elements such as silicon , sulfur and calcium in a free cutting bainitic die steel ( Y82 ) with a good match of strength and toughness and high hardenability are studied .

  9. 10Ni3MnCuA1(PMS),时效硬化镜面塑料模具钢,镜面加工性能优异,冷热加工性能和电加工性能良好,热处理变形小;

    10Ni3MnCuAl ( PMS ), is a kind of limitation hardened mirror surface plastic mould steel . Its has a good mirror surface manufacturing properties , cold & hot manufacturing properties and electric manufacturing properties , and less heat treatment deformation ;

  10. 采用TEM和ThermoCalc软件对718塑料模具钢组织中的碳化物类型及其在钢中的溶解过程进行了试验研究和模拟计算,指出正火后高温回火对小截面该钢模块具有一定的实用性。

    The carbide type and its dissolution process in microstructure of 718 plastic die steel were analyzed by TEM analyses and performed modeling calculation with Thermo-Calc software . The results show that high temperature tempering after normalizing is practical to 718 die steel with small cross-section .

  11. 结果表明,大截面预硬型塑料模具钢的基体成分显著影响非金属夹杂物的析出,并且利用Thermo-calc计算软件控制成分可以显著降低有害氧化物夹杂的含量。

    The results show that the matrix composition of large-section prehardened-mould steel for plastic markedly influences the precipitation of non-metallic inclusion and the control of composition aided by Thermo-calc software package minimizes the amount of detrimental oxide inclusion .

  12. 塑料模具钢大模块的水冷复合间隙淬火技术

    Compound Interrupted Water Quenching Techniques of Large Plastic Mould Steel Block

  13. 我国塑料模具钢的发展和应用

    Development and Application of Plastic Die Steel in Our Country

  14. 新研制塑料模具钢可加工性研究

    Study of the machinability of the new-developed plastic die steels

  15. 718塑料模具钢的组织和预硬化处理

    Structure and Pre-hardening Process of 718 Die Steel for Plastic

  16. 新型预硬塑料模具钢调质工艺研究

    Study on Quenching and Tempering Process for New Pre-hardened Plastic Die Steel

  17. 易切削贝氏体塑料模具钢中合金元素的作用

    Roles of Alloying Elements in Free cutting Bainitic Die Steel

  18. 简述塑料模具钢的性能要求。

    The quality requirements of mould steel for plastics are described briefly .

  19. 宝钢开发微合金化非调质塑料模具钢的前景及设想

    Prospects and Suggestion for Bao Steel to Develop Steels for Plastic Mould

  20. 新型易切削塑料模具钢改性处理的微观分析

    Micro analysis on modification treatment of new type easy cutting plastic die steel

  21. 改良型塑料模具钢切削性能分析

    Analysis on Machinability of Improved Die Steel for Plastics

  22. 新型贝氏体易切削塑料模具钢中夹杂物的研究

    Inclusions in a novel bainitic free-cutting plastic die steel

  23. 选择塑料模具钢的问题探讨

    A Study to How to Select Plastic Mould Steel

  24. 塑料模具钢1.2311扁钢预硬化的硬度与组织

    Hardness and microstructure of 1.2311 plastic die flat steel

  25. 时效硬化塑料模具钢工艺及性能研究

    Study on the Process and Properties of Age Hardened Die Steel for Plastics

  26. 预硬化塑料模具钢性能研究

    The Study on the Properties of Prehardened Die Steel Used for Plastic Manufacturing

  27. 锻造工艺对易切削非调质塑料模具钢性能的影响

    Effects of Hot Working Techique on Properties of Free Machining Non-Heat-Treated Plastic Mould Steel

  28. 国外典型塑料模具钢种类和特性的概述

    A systematic review of the sorts and properties of typical foreign plastic mold steel

  29. 基于数值模拟的718塑料模具钢大模块淬火新工艺设计

    Design of New Quenching Technology for 718 Plastic Die Steel Based on Numerical Simulation

  30. 浅析塑料模具钢的合理选择

    Elementary Analysis of Reasonable Choosing Plastic Mould Steel