增粘剂

zēng nián jì
  • tackifier
增粘剂增粘剂
增粘剂[zēng nián jì]
  1. 以丁基橡胶为主体材料,加入增粘剂及其它助剂,研制了一种对PP、PC等非金属材料及金属材料皆有很好粘接性能的热熔胶。

    Using butyl rubber as the base material , tackifier and some auxiliary additives , the butyl rubber based hot-melt adhesive was prepared for favorable adhesiveness with PP , PC and metals .

  2. 考查了三聚氰胺用量、反应工艺条件及增粘剂对MUF树脂性能的影响。

    Effect of malamine amount , reaction process condition and tackifier on MUF resin performance was investigated .

  3. 聚乙二醇(PEG)作为高水基增粘剂的机械降解研

    Study on the mechanical degradation of PEG in high water based hydraulic fluid

  4. 无机纤维增粘剂(BT)的流变性能

    Rheological Property of Inorganic Fiber Viscosifier ─ BT Fiber

  5. HEC比HV-CMC更适于作不分散钻井液体系的增粘剂;

    HEC is a better viscosifier than HV-CMC in non-dispersive mud system ;

  6. 将增粘剂(萜烯2种异构体)α-蒎烯树脂和β-蒎烯树脂分别与EVA树脂混合,做平行对比实验。

    Did parallel experiments in which EVA resin with α - pinene resin and β - pinene resin was respectively blended . contrasting ;

  7. 稳泡增粘剂HPAM和XC的络合性;

    Adhesion agent HPAM and XC complex characteristic ;

  8. OCP增粘剂在南阳基础油的应用评价

    The Evaluation of Application of OCP Viscosity Increaser of Nanyang Basic Oil

  9. 本文介绍了共聚物EVA树脂结构,EVA树脂、增粘剂及其它调解剂配比对热熔胶性能的影响。

    In this paper , we discussed the influence of the composition of EVA resins Viscosity increasers and other additives on the properties of hot melt adhesives .

  10. 通过对四种OCP增粘剂的剪切稳定性能、低温性能进行评价,综合考虑确定了南阳原油生产润滑油的增粘剂的种类。

    The shearing stability properties and low temperature properties of four kinds OCP viscosity increaser suitable for use in production of lubricating oil made from Nanyang crude oil are determined .

  11. 本文以EVA树脂为基础树脂,通过增粘剂,增韧剂,粘度调节剂,填料,抗氧剂等的配合,研制出书刊装订专用热熔胶。

    In this paper , application on the bookbinding of EVA hot melt adhesive which makes the EVA as raw resin , tackifier , toughening agent , viscosity regulator , padding , antioxidant etc.

  12. 橡胶增粘剂TKO系列产品开发及应用

    Development and Applications of Rubber Tackifier TKO Series Products

  13. 探讨了不同类型的SBS,SBS/CPE比例、CPE含氯量、增粘剂和增塑剂的含量等因素对粘接性能的影响。

    The influences of the kinds of SBS , CPE / SBS proportion , the content of chloride in CPE , the quantity of hyperadhesion agent and plastifying agent on adhesivity were discussed .

  14. 讨论了不同VA含量不同熔体指数的EVA和各种增粘剂对热熔胶膜耐热性、软化点、剪切强度、拉伸强度、剥离强度等性能的影响。

    Effect of different amount of EVA with different melt indexes and various tackifiers on heat-resistance , softening point , shear strength , tensile strength , and peel strength of the hot melt film adhesive was discussed .

  15. 耐盐增粘剂HCMC的研究

    Study on salt-resisting viscosifier HCMC

  16. 无机阳离子增粘剂MA-01的室内研究与现场应用

    Laboratory investigation and trial use of inorganic cationic thickener MA-01 for bentonite mud

  17. 配方选用YR-O1油溶性暂堵剂、HR水溶性非离子表面活性剂为分散剂和XT-20羟乙基纤维素为增粘剂作为主要原料。

    YR-O1 oil soluble temporary plugging agent and HR water soluble non-ion surfactant is used as the dispersant for this system , and XT-20 hydroxyethyl cellulose is used as the viscosifier .

  18. Z系列是一类有效的丙烯酸酯压敏胶的增粘剂,其中分子量较高的Z-3增粘效果最好,其适宜用量在10-15%(W)之间。

    The Z series is an effective tackifier to acrylate PSA . Z-3 that has a higher molecular weight is the best one of the Z series . The preferable use level of the Z-3 is from 10 % to 15 % ( W ) .

  19. 在新研制的抗温抗盐增粘剂FTVS的基础上开发出了一种多糖钻井液体系。

    A polysaccharide drilling fluid system is developed on the basis of a newly developed temperature resisting and salt tolerance viscosifer FTVS .

  20. 结果表明:WTZN无固相钻井液增粘剂增粘、提高动切力效果好,有利于提高钻井液携带岩屑能力;

    The result shows that the WTZN clay-free drilling fluid viscosifier is quite effective and improves dynamic shear force and cutting carrying ability .

  21. 利用丙烯酸对松香改性,制得水溶性的改性松香增粘剂,再与聚乙烯醇缩丁醛(PVB)共聚制得适合烟用水松纸水溶性油墨连接料,以替代通常的溶剂粘结剂。

    In this paper , we used acrylic acid to modify the rosin , synthesized a water soluble sticky-augment agent and then mixed together polyvinyl butyral to produce a kind of water soluble printing ink linking material , which was applicable for cigarette .

  22. 通过实验确定了最适合的增粘剂添加量,结果表明在调配时添加占胶液质量5%左右的增粘剂能有效的增加胶粘剂的剥离强度,能将未添加前的21.3N/25mm的剥离强度提升至32.5N/25mm。

    The most appropriate amount of tackifier was about 5 % of glue . The result showed that it can improve the peel strength from 21.3N/25mm to 32.5N/25mm .

  23. 结果表明:经松香乳液增粘剂、DBP增塑剂等改性的VAE乳液是粘接纸塑材料的良好粘合剂,其粘接性能达到了溶剂型加热溶胶型纸塑粘合剂的水平。

    The experimental results showed that VEA emulsion modified by the adhesion promotor of emulsion rosin , DBP plasticizer and etc is a good bonding material for paper plastic and its bonding property comes up to the standards of the solvent or hot melt bonding agents for paper plastic .

  24. 以分层度、坍落度、扩展度为新拌混凝土工作性能的评价指标,研究了矿物掺合料、砂率、增粘剂和减水剂对高强轻集料混凝土(LWAC)工作性能的影响。

    Influence of mineral admixtures , sand ratio , tackifier and water reducer on the workability of the high strength lightweight aggregate concrete ( LWAC ) are studied by taking advantage of segregation degree , slump and dispersion as evaluating indicators .

  25. 选择无毒混合溶剂和适当增粘剂可得到性能优良的无毒型乒乓球拍用胶粘剂。

    It is very important to choose blending solvents and tackifier properly .

  26. 所述的增粘剂为石油树脂或松香树脂。

    The anchoring agent is petroleum resin or abietic resin .

  27. 三种增粘剂都表现出剪切稀化的非牛顿流体。

    Three kinds of viscous agents all show a thin shear of non-newtonian fluid .

  28. 泡沫铝制备过程中增粘剂的选择

    Selection of viscosity increaser in aluminum foam preparation

  29. 蒙旦树脂作为固体软化&增粘剂在轮胎胶料中的应用

    The Application of Montan Resin as Solid Soft-Adhesive Ingredient in the Manufacture of Rubber tyre

  30. 本试验以纯铝为原料,金属钙为增粘剂,氢化钛为发泡剂,运用熔体发泡法来制备泡沫纯铝。

    In this study , the melt foaming method was studied to fabricate pure aluminum foam .