复合树脂

C组：在瓷桩上直接堆塑光固化复合树脂核。

Group C : forming composite resin core onto the post .

B组：双重固化型复合树脂核联合成品金属螺纹桩修复。

Group B , dual-cured composite resin combined with fabricated metal parapost ;

B组：全酸蚀干黏接光固化复合树脂修复；

Group B , all-etching , dry-bonding , light-curing composite resins ;

用粘度法测定了复合树脂中PVC的粘均分子量。

Molecular weight of PVC composite resin was determined by viscometer .

卤素和LED光固化灯照射复合树脂的机械强度比较

Comparison of the mechanical properties of composite resin cured by halogen curing light with those by LED curing light

创新地利用原位生成聚合工艺，成功聚合出具备抗紫外功能的纳米TiO2／PET复合树脂。

The anti-UV functional composite resin has been polymerized successfully .

SYNERGY复合树脂与银汞合金充填Ⅱ类洞的疗效对比

Effect of SYNERGY composite and silver amalgam on filling of class ⅱ cavities

合成的复合树脂用FTIR、GPC、TGA、SEM等进行了表征。

The composite resins were studied by FTIR , GPC , TGA and SEM .

牙科复合树脂增韧用纳米TiO2的表面改性和微结构

Surface modification and microstructure of nano-TiO_2 for dental composite resin

AB组份复合树脂的固位力最大，为（418.14±23.40）N。

The AB composite resin with two components reached the maximum of ( 418 . 14 ± 23 . 40 ) N.

原位聚合制备纳米SiO2/聚丙烯酸酯复合树脂及其氨基烤漆性能的研究

In-situ Polymerization of Polyacrylate / Nano-silica Composite Resin and Its Application in Baking Varnish with Melamine

目的比较SYNERGY复合树脂和银汞合金充填Ⅱ类洞的临床疗效。

Objective To investigate the effect of SYNERGY composite resin and silver amalgam on filling of class ⅱ cavities .

含RF填料复合树脂的柔量明显小于普通填料复合树脂（P<0.01）。

The creep compliance of the composite resin reinforced with RF is significant smaller than that of NF composite resin ( P < 0.01 ) .

熔附条件对牙科复合树脂中α-Si3N4结构及形态影响研究

Effect of fusing condition on structure and morphology of α - Si_3N_4 in dental resin composite

结论：不同载体和浓度的CP漂白剂可以引起光固化复合树脂颜色的改变，但没有显著的临床意义。

Conclusion Bleaching agents of different carrier or concentration can cause color change in 4 light-polymerized composite resins , but no obviously clinical significance .

PU和PUA橡胶相的加入，使复合树脂的耐热稳定性略有降低。

The stability of heat-resistance of composite resins decreased a little with the adding of PU or PUA rubbery phase .

硼酸铝晶须对CC-4型BA复合树脂力学性能的影响

Influence of aluminium borate whisker on mechanical properties of CC-4 type BA composite

Sb2O3添加量的增加对复合树脂的粒径分布影响不大，而细粒含量随着Sb2O3添加量的增加而增加。

The addition amount of Sb_2O_3 hardly effected the size distribution of the particle , but the amount of fine particles increased as the addition amount of Sb_2O_3 increased .

目的：研究不同增稠载体与不同过氧化脲（carbamideperoxide，CP）浓度配制的漂白剂对光固化复合树脂修复体颜色的影响。

Objective To investigate the effect of bleaching agent prepared by different viscosity carrier and concentration carbamide peroxide ( CP ) on the color of light-polymerized composite resin restorations .

将OOCr（18）Ni（13）Mo3材料和EH型复合树脂制成两种不同物理形状的试样，进行溶血试验。

OOCr_ ( 18 ) Ni_ ( 13 ) Mo_3 and EH composite resin , two different physical shapes were used in haemolysis test . The relationship between the sample shape and results were investigated .

制作陶瓷/复合树脂粘结体，室温下置蒸馏水中浸泡24h，微拉伸法测试各组试件粘结强度。

Each ceramic block was bonded to composite resin with light curing resin cement , and the samples were cut for micro-tensile bond strength test after 24 hour storage in room temperature distill water .

用对硝基氯苯作指示剂测得复合树脂2的Hammett酸度常数为－12.70。

The Hammett acidity function ( H ,) of the complex resin 2 was determined tobe ≤ - 12 . 70 using p-nitrochlorobenzene as indicator .

结果表明，与PVC相比，PVC/纳米CaCO3复合树脂的热稳定性、增塑剂吸收量及表观密度等有所提高；

The properties of PVC / nano-CaCO_3 were studied . The results reveal that compared with pure PVC , the composite resin has a given increment in its thermostability , absorption ratio for plasticizing agent and apparent density .

总之，自制暂时冠桥复合树脂材料Fast-Temp具有良好的生物相容性。

In a word , the new composite , Fast-Temp has good biocompatibility .

目的：比较3M光固化复合树脂，卡瑞斯玛光固化复合树脂和GCFujiII玻璃离子体三种材料在牙颈部缺损修复中的美学效果和临床疗效。

Objective To compare the aesthetics results and clinical results of three materials : 3M light-cured compounded resin , CHARISMA light-cured compouned resin , GC Fuji II glass ionomer restorative cement , which are used for aesthetics restoration of tooth cervix defect .

检测了由合成EAM单体或EMA单体配制复合树脂的压缩强度、径向拉伸强度、表面硬度、固化深度、吸水值和水溶解值。

The compressive strength , diametral tensile strength , surface hardness , cured depth , water uptake , and water solution of the composite resin with EAM monomers and those of EMA were measured .

SQ-2000复合树脂底涂应用研究

Application of Compact Resin SQ-2000 in Basecoat

用1HNMR、MS和FT-IR测试技术对产物结构进行了表征，通过剪切强度的测试评价了其对复合树脂与高含金合金、钛合金和钴铬合金之间的粘接所起到的作用。

The structure of the product was characterized by ~ ( 1 ) H NMR , MS and FT-IR , and the effect of this product on the bond durability between ( composite ) resin with Au alloy , Ti alloy or Co-Cr alloy was evaluated .

采用Photo-DSC研究了樟脑醌（CQ）/乙二醇-3-吗啡啉基丙酸酯甲基丙烯酸酯（EGMPM）可见光引发牙科复合树脂聚合的动力学过程。

Kinetics of dental composite initiated by camphorquinone ( CQ ) / ethylene glycol 3-morpholine-propionate methacrylate ( EGMPM ) was monitored by Photo-DSC .

该复合树脂含有二甲基丙烯酸酯单体和二异氰酸酯改性EAM新型基质树脂（UDMA）。

The composite contains a dimethacrylate monomer and a new matrix resin which is EAM resin modified with diisocyanate ( UDMA ), and it contains no MMA .