多元合金

低铬多元合金磨球

Low Chromium Multi-element Alloy Grinding Ball

含硼多元合金耐磨铸铁球的磨矿工业试验与生产实践

Commercial-scale trail and operation practice of ore-grinding by using boron-bearing and wear-resisting cast iron ball made from multi-element alloy

多元合金的无标样能量色散X射线荧光分析

X-ray fluorescence analysis of multicomponent alloys without using standard samples

用X射线荧光光谱法非破坏测定多元合金薄膜的组分和厚度

Non-destructive determination of composition and thickness of multi-component alloy thin films by X-ray fluorescence spectroscopic method

fe-c-∑x多元合金等离子弧喷焊组织结构和性能研究

Research on Microstructure and Property of Fe-C - Σ X Multicomponent Alloy Plasma Arc Spray Welding

以多元合金化改进球磨Mg基贮氢电极合金循环稳定性的研究

A Study on the Improvement of Cycling Stability of Ball-milled Mg-based Hydrogen Storage Electrode Alloys by Means of Multi-component Alloying

Ni-P基多元合金镀层的耐腐蚀磨损性能

The Corrosion - wear Resistance of the Ni-P Polybasic Composite Coating

多元合金化是提高TiN镀层的有效途径之一，也是目前研究的热点。

Multi-element alloying is one of the methods to improve the properties of TiN coatings , which has been widely investigated .

多元合金Al-Si耐热铸铁的强化

Strengthening Al-Si Heat-Resisting Cast Iron by Multi-Component Alloy

高硅铝合金中加入Bi形成Al-Si-Bi多元合金，具有偏晶转变的结晶特点。

Bi is added into high silica Al-alloy to form multicomponent Al-Si Bi whose crystallization has the character of monotectic transition .

由TiCr基合金的二元相图出发，综述了TiCr基合金的储氢性能，并重点介绍了多元合金化对其储氢性能的影响。

Based on Ti Cr binary phase diagram , the hydrogen storage performance of Ti Cr based alloy and especial influences of alloying were reviewed .

由于合金元素的影响，多元合金钎料的金属间化合物生长速率最快，纯Sn的焊接接头最慢。

The IMC growth rates are the fastest when the solder is multi-components alloy because of the effects of alloy elements .

借助金相显微镜、TEM、SEM/EDS、XRD及电导仪研究了热处理对铜基多元合金导电性能的影响。

The effect of heat treatment on electrical conductivity of Cu based multi-component alloy was studied by metallographic microscope , TEM , SEM / EDS , XRD and conductance instrument .

提出了通过优化工艺、添加稀土元素、采用多元合金化学镀等方法可提高化学镀Ni-P合金的耐蚀性能；

Many methods such as technology optimization , adding rare earth element and electroless multi-alloy plating can improve the anti-corrosion property of electroless Ni-P plating coating ;

利用河南铝矿石直接电解的Al－Si－Ti多元合金，系统研究了添加少量合金元素后的变形铝硅钛多元合金的显微组织、挤压性能和力学性能。

The microstructure , hot extruded property and mechanical property of a new type wrought aluminium alloy produced by adding several alloy elements to direct electrolytic product Al Si Ti complex alloy have been examined .

文章通过金相、X射线衍射（XRD）、扫描电镜（SEM/EDS）及透射电镜（TEM）和力学性能分析方法研究不同热处理工艺对含多元合金元素铜合金硬度和冲击韧性的影响。

The effect of heat treatment on hardness and impact toughness of polynary Copper alloy has been studied by means of metallographic , XRD , SEM / EDS , TEM and mechanical property test .

Fe-∑M-C多元合金奥氏体中碳活度的估算

Estimation of Carbon Activity in Austenite of Fe - Σ M-C Multi-Component Alloy

Ho择优溅射效应修正对三元和多元合金定量分析的平均相对偏差为9.5%。

And for three-component alloy and multicomponent alloy RSD would be 9.5 % when a-factor iterative correction and the effects of preferential sputtering P.S. Ho method were considered also .

应用光学金相、X射线衍射（XRD）、扫描电镜（SEM）和透射电镜（TEM），研究CoCrW系钴基多元合金等离子转移弧堆焊的显微组织、相组成和微观结构。

The microstructure , phase composition and microscopical analysis of Co-Cr-W series cobalt-based multi-component alloy deposited by PTA surfacing are investigated using optical microscope , X-ray diffraction , scanning electron microscope , and transmission electron microscope .

然后，进一步就多元合金化和复合球磨改性处理对V基贮氢电极合金相结构及电化学性能的影响进行了详细的研究，力求逐步优化合金的相结构并提高合金的综合性能。

Whereafter , the research scheme for improving the phase structures and electrochemical performance of V-based hydrogen storage electrode alloys by means of multi-component alloying and ball-milling was chosen and the method of step-by-step optimization was adopted .

首先从理论上分析了采用硫化&真空蒸馏法处理铜砷锑多元合金除杂富集Cu的可行性，并通过实验考察了加硫量、蒸馏温度、蒸馏时间对蒸馏效果的影响。

Feasibility of processing Cu-As-Sb multi-component alloy to remove impurity and enrich valuable metal Cu by sulfuration-vacuum distillation was theoretically analyzed . The effects of addition of sulphur , distillation temperature and distillation time on the distillation effect were studied .

研究了多元合金化材料（在低高速钢中添加V，Nb，N，Re等元素）的组织结构和性能。

The microstructure and properties of the new material of guide roller was studied . , through adding alloy elements such as V , Nb , N , Re etc on the basis of low alloy high speed steel .

用紧束缚能带计算方法（EHT）研究了标题多元合金的能带及电子结构。

The electronic and energy - band structures of the title alloys have been studied by using the tight-binding method within the extended Huckel approximation ( EHT ) .

其合金成分的确定以探索性的实验方法为主，基于现存的Sn-Zn二元合金近共晶成分进行多元合金设计和性能改善，并通过多次实验加以验证，逐步优化合金成分。

The decision of the composition of the alloy was performed by the trial experiments , and proceeded the multi-alloy design and properties improvement based on the current Sn-Zn binary near eutectic composition .

认为添加了具有特殊性质稀土的Al-Ti-C-RE和Al-Ti-C-B-RE的多元合金晶粒细化剂是今后发展的方向。

The paper suggest that the Al-Ti-C-RE and Al-Ti-C-B-RE multi-alloy which add the special properties rare-earth will lend the development of aluminum grain refiner .

在微观计算中，形核计算采用了基于高斯分布的连续形核模型，生长计算采用了扩展的KGT模型，使其适用范围由二元合金扩展至多元合金。

In microstructure simulation , the nucleation adopts the continuous nucleation model based on Gaussian distribution , and the growth adopt the extended KGT model which fit complex alloy expanded from binary alloy .

以Al-Si-Mg三元合金为例，采用该相场模型实现了逼真地模拟多元合金凝固过程的等轴枝晶生长，得到了二次或更高次晶臂生长等复杂的枝晶形貌。

The isothermal dendritic growth of Al-Si-Mg alloys is presented as a numerical example , accordingly , the dendrite growing morphology of multicomponent alloys solidification could be simulated realistically using the phase-field model . ( 2 ) isothermal ;

多元合金高铬铸铁篦条的研制和应用

Development and Application of Multi-Alloyed Hi-Chromium Cast Iron Furnace Grate Bars

多元合金熔体组元活度系数计算方法的改进

Improvement of calculation method for the activity coefficient of multi-component alloys

多元合金高铬白口铸铁性能的研究

Work on Properties of Multi Alloying High Chrome White Cast Iron