径向载荷

  • 网络Radial load
径向载荷径向载荷
  1. 圆柱滚子和推力滚针组合轴承YRT系列具有旋转精度高、可承受较大的径向载荷和双向轴向载荷以及大的倾覆力矩等特点。

    YRT series cylindrical roller and thrust needle roller combined bearings , with high rotation accuracy , can support heavier radial loads , double direction axial load and inclined torque , etc.

  2. 径向载荷作用下复合材料圆柱壳的非线性动力屈曲

    Nonlinear dynamic buckling of composite cylindrical shells under radial loads

  3. 最大轴向载荷10t,最大径向载荷6t,最高温度250℃,最大转速24000转/分。

    The max axial load is 10t , and the radial load is 6t . The max temperature is 250 ℃, and the speed of rotation is 24000 n / m.

  4. 讨论了径向载荷作用下的复合材料圆柱壳的动力响应问题。

    The dynamic response of laminated composite cylindrical shell was discussed .

  5. 螺旋弹簧受均匀分布径向载荷时的内力

    Internal Forces of the Spiral Spring under the Radial Uniform Load

  6. 橡胶筒承受径向载荷时的位移解析解

    Displacement analytic solution of rubber bush subjected to radial loading

  7. 径向载荷的变化对轴承径向刚度的影响可以忽略。

    The effect of radial load to radial stiffness can be neglected .

  8. 径向载荷对行星摆线针轮减速器的影响分析

    The Analysis of cycloid Roller-Drive Speed Reducer Under the Influence of Radial Load

  9. 旋转轴径向载荷测定的探讨

    On Determination of Radial Loads on Rotating Shaft

  10. 电缆支座承受径向载荷时的弹塑性分析

    Elastic and plastic analysis of cable-sustainer under radial-load

  11. 只能承受一个方向的轴向载荷,不能承受径向载荷。

    A direction can only carry axial load , can 't bear radial load .

  12. 然而,他们只有当同时受轴向负荷时才能够承受径向载荷。

    However , they can sustain radial loads only when simultaneously subjected to axial loads .

  13. 它们只承受径向载荷。

    They take up only radial loads .

  14. 液压缸承受轴向与径向载荷的非线性有限元分析与优化

    Nonlinear Finite Element Analysis and Optimization of Hydraulic Cylinder Enduring Axial Loads and Radial Loads

  15. 圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷。

    Tapered roller bearings are generally used to support combined load mainly consisting of radial load .

  16. 深沟球轴承主要承受径向载荷,也可承受一定量的轴向载荷。

    Deep groove ball bearings mainly take radial load as well as take moderate axial load .

  17. 径向载荷和轴向载荷对接触角的变化影响较大,直接关系到滚珠轴承的失效情况;

    The radial and axial loads affect the ball contact angles relating to the bearing failure .

  18. 管杆磨蚀率均随着径向载荷的增加而增大。

    The abrasive wear of the rod and tubing increases with the increase of the radial load .

  19. 径-推联合浮环动静压轴承即能承受径向载荷又能承受轴向载荷。

    Radial-thrust floating-ring hybrid bearing can sustain not only the radial load but also the thrust load .

  20. 调心球轴承可承受较大的径向载荷,同时也能承受必定的轴向载荷。

    Self-aligning ball bearings may withstand the big radial direction load , also can withstand the axial load .

  21. 车轮径向载荷疲劳试验机径向加载力示值误差的测量不确定度评定

    Evaluation of Uncertain Degree for Radial Force Display Error of Radial Load Fatigue Test Machine for Vehicle Wheels

  22. 该类轴系支承可同时承受轴向载荷、径向载荷、倾覆力矩及其组成的多种形式的复合载荷。

    This kind of bearing can simultaneously support axial loads , radial loads , overturning moment and compound loads .

  23. 有高的径向载荷能力,特别适用于重载或振动载荷下工作,但不能承受纯轴向载荷。

    High radial load capacity , especially for heavy loads or vibration , but can not afford a pure axial load .

  24. 提出一种分析对称变曲率拱在均布径向载荷作用下的非线性稳定性的理论方法。

    A non-linear theory is presented for stability of an arch with central curvc of symmetrically variable curvature under uniform lateral load .

  25. 采用液压加载,轴向和径向载荷、静载和动载可分别单独或同时施加;

    It adopts hydraulic loading , and axial and radial load , static load and dynamic load can be exerted respectively or synchronously .

  26. 但这种轴承成本高,抵抗径向载荷和倾覆力矩性能差,且易损坏,维修量大。

    But the costs of bearings are very large . The ability of resisting radial load and topple moment of force is very poor .

  27. 调心轴承具有较高的径向载荷能力,并且适应许多同时具有径向和轴向载荷的混合载荷情况。

    Self-aligning bearings have high radial load capacity and to adapt to a number of both radial and axial load of a mixed load .

  28. 其次,由轴向定位预紧轴承受径向载荷时各滚子的变形,推导出轴承的径向刚度计算公式;

    Second , the calculation formula of radial rigidity is deduced according to the deformation of rollers under the radial load with axial position preload .

  29. 影响水润滑导轴承可靠性的主要因素有:轴承所受径向载荷、轴瓦材料、润滑水质。

    The main influence factors of reliability of water lubricated guide bearing were radial load of guide bearing , bearing material and lubrication water quality .

  30. 滑动轴承座由上盖、底座、剖分轴瓦(铝青铜),安装螺栓组成,主要承受径向载荷。

    Plain Bearing Block Housings are made up of cap , base , aluminum bronze bushing and installing bolts , which mainly bear radial load .