手糊成型

产品已在手糊成型和RTM成型的玻璃钢上得到了应用。

It is used in the FRP products made by hand lay-up or RTM molding method .

手糊成型工艺生产过程中的质量控制

Quality control during hand lay-up process

并适用于拉挤成型、注射成型（RTM）、缠绕成型、手糊成型等玻璃钢成型工艺。

Fiberglass stitched mat is used in unsaturated polyester resin strenthen , primarily in pultrusion , RTM , filament winding and hand lay-up processed .

论述了基体树脂、增强材料的选择，GFRP塔的结构设计、强度计算和手糊成型、组装的工艺要求。

The choice of the matrix resin and the reinforcing material , and the structural design , the strength calculation and the technical demands of hand lay-up for CFRP packed tower are introduced .

以玻璃纤维为原料，在普通平面织机上试织成各种结构的3D机织物，并用环氧-聚酰胺树脂体系，通过手糊成型工艺制得各种结构的复合材料板材。

Different structures of 3D fabrics can be successfully woven with glass fibres on normal looms , and the composite laminates are to be manufactured by hand pasting in epoxy and polyamide system . And the tensile , delamination shearing and impact resistance properties have been tested and analyzed .

利用TDE-90环氧树脂与4501A双马来酰亚胺树脂共混体系，获得了适于缠绕成型和手糊成型的高性能树脂基体。

A new resin suitable for winding and hand lay up molding for high performance composites in aerospace application has been developed by using TDE-90 epoxy compound and 4501A bismaleimide .

手糊成型玻璃钢圆柱形容器的设计

The structure design of cylindrical tank with hand lay-up process

手糊成型用酚醛树脂及工艺的初步研究

Tentative study on phenolic resin for hand lay-up process

本文介绍了在制造玻璃钢产品手糊成型中各种技术要求及工艺流程的质量控制。

Various technical requirement and the quality control of technological process in FRP hand lay-up process were mentioned .

旋转模塑设备的设计与制造是在满足旋转模塑工艺的基本要求及考虑液态反应性聚合物成型工艺性的基础上进行的。模具的制造采用了手糊成型工艺。

The equipment design and manufacture is based on the basic requirement of the roto-molding and the liquid polymers .

本文介绍了手糊成型酚醛玻璃钢矩形贮槽的结构设计、成型工艺及应用情况。

This article introduces structural design , technological process and application of hand lay-up GF phenolic plastics rectangle tank .

短切毡主要通过手糊成型工艺，缠绕成型工艺，模压成型工艺用于加工制作玻璃钢产品。

It is used primarily for hand lay up process , filament winding process and press molding of FRP products .

本文介绍了手糊成型玻璃钢圆柱形容器的结构设计，并对内衬层成型工艺提出了改进方法。

The structure design of cylindrical tank with hand lay-up process were introduced , the improved method of liner forming process were provided .

实际试用结果表明，该树脂不仅适用于喷涂、手糊成型工艺要求，而且是良好的模具胶衣树脂。

The resin is not only suitable for spray up and hand lay-up processes , but also a good kind of gel coat resin for mould making .

本文对酚醛手糊成型的树脂及其合成方法、固化促进剂、活性助剂、辅助材料以及成型工艺做了初步的研究，并进行了讨论。

In this paper , we indicateed some researches on the resin , curing agent , active additive and other materials suitable for phenolic hand lay-up process .

最后，通过手糊成型方法介绍了树脂裱糊过程中的裱糊工艺、合模工艺、脱模工艺、表面处理工艺及其机械加工工艺。

Lastly , presents paperhanging processes , close | mould processes , releasing process , surface treatment process and machining process in course of resin paperhanging by handcraft modeling processes .

介绍超微型汽车玻璃钢车身的研制。根据车身的要求，进行配方设计、结构设计、手糊成型工艺条件确定。

This paper introduces the development of the super-minicar body of glass fibre reinforced plastics , and the formulation and construction design , decision on the forming process according to the requirement of the body .

采用手糊成型工艺制备了经编针织物／不饱和聚脂树脂复合材料板材，以及树脂浇铸体和单向复合材料试样，并测试了材料的基本参数。

The resin casting body , the laminates of unidirectional glass-fiber reinforced composites and warp knitted fabrics / unsaturated polyester resin composites were prepared by hand lay up method . The basic parameters of them were tested .

广泛用于手糊和机械成型产品，如船舶，飞机和汽车部件。家具，运动设施和其他广泛的应用领域。

It is compatible with Polyester , Vinyl ester and Epoxy resin and widely used in hand and machine production , such as boats , vessels , plane and automotive parts , furniture , sports and other areas .