板坯

  • 网络slab;cast slab;blank
板坯板坯
  1. 由以单个板坯交换和板坯组交换为核心的禁忌搜索(TS)进一步优化,得到最后的优化结果。

    The third stage is to generate the final results by adopting tabu search ( TS ) based on swaps of single slab and slab group .

  2. 涟钢CSP工作辊发生剥落的主要原因是板坯温度不均、轧辊冷却温度不均和轧制事故。

    The main reasons of CSP work roll flaking in Lianyuan Steel are the uneven slab temperature , uneven roll cooling temperature and the rolling accident .

  3. 热轧厂MES的板坯库管理

    Slab yard management of hot rolling MES

  4. 用连铸板坯劈分法可以实现大规格多品种H型钢的生产,而且这种方法因为投资少节省能源,而获得了广泛应用。

    The large cross-section and multi-variety H-beam is able to be produced by the method of splitting continuous casting slab , moreover , this method has been applied comprehensibly for its small investment and economization of energy .

  5. 此外,含Ni、Cu合金元素板坯在均热炉内加热时会产生很粘的氧化铁皮,影响钢材表面质量。

    Moreover , sheet billet containing Cu , Ni will bring about a layer of viscous iron oxide scale when heated in soaking furnace that resulted in influence on the surface quality of steel product .

  6. ACC实现自动燃烧控制/数据设定;对加热炉内的板坯进行合理加热;

    ACC is used for automatic combustion control and data setting , proper heating of slab , and accurate control of slab temperature and its evenness .

  7. 水平连铸Al-Sn板坯制造铝钢轴瓦

    Horizontal Continuous Casting of Al-Sn Billet for Manufacturing Al-Steel Axle Bushing

  8. 连铸板坯用70t夹钳的研制

    Development of the 70t gripper for continuous casting slab

  9. 1Cr18Ni9Ti不锈钢板坯连铸的生产实践

    Production practices of ! Crl8ni9ti stainless steel CC Slabs

  10. 针对板坯连铸工艺,细化二冷各区的边界条件,应用VISUALBASIC语言设计开发了板坯连铸二次冷却计算机通用仿真软件。

    In allusion to technics of the slab continuous casting , all-purpose computer simulation software for secondry cooling process in slab continuous casting is designed and developed by means of programming language Visual Basic , which has subdivided the boundary condition of every secondary cooling zone .

  11. 应用通用的板坯连铸浇注过程静态仿真软件CCPSOFFLINE,对某钢厂板坯连铸机的二次冷却系统进行了数值仿真。

    Using the general static simulation software of slab continuous casting process , CCPS OFFLINE , the secondary cooling system of No. 4 slab caster in a steel plant has been numerically simulated .

  12. 介绍安钢120t转炉炉卷轧机工程中宽板坯连铸机的工艺、装备及技术特点。

    This paper introduces the process , equipment and technical features of the wide slab caster of the 120t converter - steckel mill project in Anyang Steel .

  13. 根据酒钢目前采用的国际一流的奥地利VAI公司的板坯连铸机,对连铸关键技术结晶器自动调宽控制系统进行研究和设计,具有十分重要的现实意义。

    Jisco has the international first-class slab caster from VAI , so it is necessary to research and design the control system of the crystallizer width adjust .

  14. EMBr对板坯结晶器钢液流动、传热及夹杂物去除的影响不锈钢/普碳钢复合连铸结晶器内流场实验研究

    Effect of EMBr on fluid flow , heat transfer and inclusion removing during CC Experimental Investigation on Flow Field in Continuous Casting Mold for Clad Steel

  15. 结合二热轧板坯库工程施工实例,介绍CFS桩的试桩试验、施工工艺和检测效果。

    The piling tests on the CFS piles , the construction process and results of measurements are described in combination with some examples of the practice in the construction project of the slab storage at the No.

  16. 94t电动式板坯夹钳钳臂产生裂纹的分析及改进措施

    Analysis on arm cracking of a 94t electric steel billet clamp and measures of improvement

  17. 针对传统连铸板坯定尺控制中检测辊存在磨损、打滑等影响定尺精度的问题,采用CCD数字图像边缘检测技术,实现了连铸板坯定尺切割控制和铸机拉速的动态跟踪。

    Such problems were introduced as abrasion and slippage , which existed in the measure-roller of continuous-casting slab length control , and a technology of edge detection for CCD digital image was given which actualized a method of continuous-casting slab length measurement and cutting and casting speed dynamic trace .

  18. DWR-1型一拖三软起动在临钢板坯连铸二冷风机中的应用

    Application of Three dragged by One Soft Start of Type DWR-1 in Secondary Cold Air Blower of Slab Caster

  19. 采用开发的凝固模拟系统对0.07%~0.70%碳钢1500mm×150mm连铸板坯凝固过程进行了模拟。

    The 1 500 mm × 150 mm slab concasting solidification process of 0.07 ~ 0.70 C steel has been simulated by developed solidification simulation system .

  20. 介绍了宝钢集团一钢不锈钢板坯连铸现场采用德国MINIMAX公司的火灾自动报警设备系统的特点,并就该系统安装调试及其注意事项进行了阐述。

    The system characteristics of the automatic fire alarm products from Germany MINIMAX Co. being adopted in the stainless steel slab casting field engineering at the First Steel Plant of Baogang Group were introduced , and precautions about installing and commissioning were expounded .

  21. 该加热炉控制系统采用目前世界上先进的光缆通信、炉子自动燃烧控制模型(ACC),实现对钢温的精确控制,并通过模型中参数的调整,实现对不同规格板坯的优化加热。

    In the system , advanced optical fiber cable communication and automatic combustion control mathematics model are adopted to realize the precise control of slab temperature . Meanwhile , it also can implement the optimum heating of varied specification slab , based on the adjustment of parameters in the model .

  22. 结果表明,在雾化压力0.8~1.0MPa,沉积距离300mm时,采用气动扫描辅助喷嘴,并在200℃预热基板,可得到一最佳效果双金属板坯;

    The experimental results show that the best deposited plate was obtained when the gas atomization pressure is 0.8 ~ 1.0 MPa , the spray distance is 300 mm and the preheating temperature of substrate is 200 ℃ .

  23. 针对1240mm×200mm板坯连铸提出了一种钢水内外复合冷却技术,即在结晶器内设置内冷却器-U形管,起到提高传热效率和改善钢液流动之目的。

    A technology of inner-outer couple cooling of molten steel in mold for 1 () 240 mm × 200 mm slab concasting i.e.to set an inner cooling apparatus-U shape pipes has been advanced to enhance efficiency of heat transfer and improve flow of molten steel .

  24. 介绍了板坯连铸机三台二冷风机共用一台DWR-1型一拖三软起动设备的原理、安装及其使用效果。

    The paper presents the principle , installation and effect of a slab caster with three secondary cold air blowers which uses a set of type DWR-1 soft start equipment with three dragged by one .

  25. 结晶器液位自动控制已经成功应用在铸坯截面为150mm×150mm以上的板坯连铸机上,而在小方坯连铸机(铸坯截面为130mm×130mm)上的应用效果不佳。

    Mold level control has been successfully used in the slab continuous casting machine that cross sectional area is above 150 mm × 150 mm , but effect is not good for the billet caster ( the cross sectional area is 130 mm × 130 mm . ) .

  26. 连铸板坯热轧变形的计算机仿真

    Computer simulation of deformation of continuous casting slab during hot rolling

  27. 热轧厚板及板坯的实用轧制压力公式

    The practical formula of rolling pressures for slabs and hot-rolled plate

  28. 热轧板坯库出库计划编制模型与算法研究

    Research on slab discharge planning model and algorithm for hot-rolling slab-yard

  29. 梅山2号连铸机试生产板坯质量分析

    Analysis on Slab Quality of No.2 CC Machine in Meishan Steel

  30. 板坯连铸铸速的提高及其相关问题的探讨

    Investigation about increasing of slab CC casting speed & related problems