氟硅橡胶

  • 网络fvmq;Fluorosilicone
氟硅橡胶氟硅橡胶
  1. 研究了氟硅橡胶胶粘剂的热空气老化性能和高温粘接性能。

    The thermal ageing properties in air and adhesion at200 ℃ of the heat curing fluorosilicone adhesive were investigated .

  2. 研究了二氧化铈、三氧化二铁和气相法二氧化钛等金属氧化物对共聚氟硅橡胶SKTFT-25耐热性能的影响。

    The effects on the heat resistant properties of the metal oxides , such as ceria , ferric oxide and fumed titania etc , to the copolymerized fluorosilicone rubber SKTFT-25 .

  3. DMTA分析结果表明苯基硅橡胶和共聚氟硅橡胶具有非常优异的低温性能。

    The results of DMTA showed that the rubber based on PVMQ , SKTFT-50 , SKTFT-25 and the copolymer have excellent cold resistance .

  4. 研究羟基封端氟硅橡胶(HFSR)的制备方法。

    Hydroxy-terminated fluorosilicone rubber ( HFSR ) has been prepared by condensation of hydroxy-terminated fluorosilicone oil in presence of various catalysts .

  5. 小型变压器中氟硅橡胶密封圈的设计和应用

    The design and application of fluorine-silicon rubber sealing ring in certain mini-transformer

  6. 热固化铜粉导电胶的研究热硫化型氟硅橡胶胶粘剂的耐热性能

    Study on Thermal Stability of Heat Curing Fluoro silicone Adhesive

  7. 用~1H&NMR法表征氟硅橡胶的结构

    Microstructure characterization of fluorosilicone rubber by ~ 1h-nmr spectroscopy

  8. 氟硅橡胶与聚酯织物的粘接研究

    Vulcanization Bonding of Fluorosilicone Rubber and Polyester Fabric

  9. 快速注压成型氟硅橡胶的研究

    Study on Fast Injection Transfer Curing Fluorosilicone Rubber

  10. 共聚氟硅橡胶耐油性能的研究

    Research on oil resistance of copolymerized fluorosilicone rubber

  11. 端硅氢活性氟硅橡胶的制备及基本性能的研究

    Synthesis and Properties of Terminal Si-H Liquid Fluorosilicone

  12. 新型氟硅橡胶义齿软衬材料吸水性和溶解性的研究

    Water sorption and solubility of a new type of fluorine silicone denture soft lining materials

  13. 研究了不同偶联剂对氟硅橡胶和聚酯织物粘接性的影响,并对粘接机理进行了探讨。

    The bonding between fluorosilicone rubber and polyester fabric is studied over selecting different coupling agents .

  14. 羟基封端氟硅橡胶的制备

    Preparation of Hydroxy Terminated Fluorosilicone Rubber

  15. 国内氟硅橡胶的研究进展

    Development of domestic fluorosilicone rubber

  16. 试验结果表明,氟硅橡胶可以很好地满足二甲醚发动机对橡胶密封件的要求。

    The results indicate that FMQ could well meet the material requirement of seals for DME engines .

  17. 中俄氟硅橡胶生胶性能对比

    Property Comparison of Fluorosilicone Gum

  18. 目的研究国产热固化氟硅橡胶义齿软衬材料对口腔微生物的影响。

    Objective To evaluate the growth of oral microorganisms on a heat-cured fluorine silicone soft lining material .

  19. 热硫化氟硅橡胶

    Heat vulcanizing fluorosilicone rubber

  20. 结果表明,补强剂的种类对氟硅橡胶与各类金属粘接的扯离强度有一定的影响;

    The result showed that the types of active filler affected the tear strength of fluorosilicone rubber at the various rubber-metal interfaces ;

  21. 考查了聚合温度和初始引发剂浓度对热硫化氟硅橡胶聚合动力学的影响,并掌握了相关规律。

    In order to study the polymerization kinetics of HTV fluorosilicone rubber , it is polymerizated at different polymerization temperature and initiator concentration .

  22. 在氟硅橡胶主链中引入二甲基硅氧烷单元,不会对材料性能产生大的影响,但可以有效降低的成本。

    Introducing of the dimethylsiloxane units into the main chain of fluorosilicone rubber would slightly affect the properties of material , while reduce the cost effectively .

  23. A是一种铝镀银微粒填充的硅或氟硅橡胶,它能达到最高的导电性。

    CONSIL-A is the silicon which or the fluorine silica gel one kind of aluminum silver-plating particle fills , it can achieve the highest electrical conductivity .

  24. 将107硅橡胶与氟硅橡胶共混,所制备的义齿软衬材料的耐介质性能明显提高,其拉伸强度增大。

    The medium resistance of denture soft lining materials prepared by blending 107 silicone rubber and fluorosilicone rubber was improved remarkably , and the tensile strength of the product also increased .

  25. 结合广州软质胶布厂桩基施工,试述灰岩地区钻孔灌注桩施工技术的应用氟硅橡胶与聚酯织物的粘接研究

    This paper discusses the application of bored grouting pile technology in limestone based on pile foundation construction in Guangzhou Soft Rubber Fabric factory . Vulcanization Bonding of Fluorosilicone Rubber and Polyester Fabric

  26. 气相白炭黑对氟橡胶/硅橡胶共混胶性能的影响

    Effect of Fumed Silica on Properties of FKM / MVQ Blends

  27. 氟橡胶/硅橡胶共混胶的制备、结构与性能研究

    The Preparation , Structure and Properties of Fluororubber / Silicone Rubber Blends

  28. 在常温工作条件下使用丁腈橡胶,在高温或低温时采用氟橡胶或硅橡胶。

    NBR rubber O-rings provide trouble-free operation at standard temperature ranges . For high and low temperature applications Viton or Silicone .

  29. 普通型:丁晴耐油橡胶。高温,低温的应用场合,使用氟橡胶和硅橡胶。使用相应的润滑剂。

    Common type : nitrile butadiene oil resistant rubber . Fluoroelastomer and silicon rubber are used in applicable situation of high and low temperature . Use relevant lubricant .

  30. 按所用单体的不同,可分为甲基乙烯基硅橡胶,甲基苯基乙烯基硅橡胶、氟硅,腈硅橡胶等。

    Used by the different monomers can be divided into methyl vinyl silicone rubber , methyl phenyl vinyl silicone rubber , fluorosilicone , nitrile rubber and so on .