共混物

结果表明：共混物的非牛顿指数n

The results showed that the blend 's nop-Newtonian index

IR／CR共混物网络结构评价

Evaluation of Network Structure of IR / CR Blend

用超临界CO2为溶胀剂制备PE/PS共混物

Preparation of PE / PS composites using supercritical CO_2 as swelling agent

双单体熔融接枝PP的制备及其增容PVC/PP共混物的研究

Study on Double-monomer Melt Grafting PP Compatibilizes PVC / PP Blends

ABS/改性PP共混物形态与冲击性能

The morphology and impact property of abs / modified PP blending material

ABS恶唑啉化对PA6/ABS共混物的增容作用研究

Study on Compatibilization of Oxazoline-modified ABS to PA6 / ABS Blends

PVC／EC共混物的研制及其性能表征

Preparation and Characterization of Properties of PVC / EC Blends

PVC共混物在拉伸强度方面呈现加和关系。

HNBR / PVC blends showed an additive property relationship with respect to tensile strength .

SBR／PP共混物的结晶行为和性能

Crystallization behavior and properties of sbr / pp blends

研究了PAN／PU共混物的熔融纺丝工艺。

The melt-spinning technology of PAN / PU blending polymer was also studied .

尼龙1010／PP－g－MAH共混物热行为及力学性能研究

A Study on Thermal Behavior and Mechanical Properties of Nylon-1010 / PP-g-MAH Blend Systems

PE、EVA及LDPE／EVA共混物辐照特性的研究

Studies on the Radiation Behavior of PE , EVA and LDPE / EVA Blends

用DSC结晶曲线研究了共混物、Al（OH）3/PP和改性Al（OH）3/PP复合材料的非等温结晶行为。

The crystallization behavior of PP blends and Al ( OH ) _3 / PP composites were investigated with DSC .

当HDPE含量较高时，PP只能生成尺寸较小的结晶碎片（细化），与此形态对应，可获得高冲击强度的PP/HDPE共混物。

When the content of HDPE was high , PP only formed small crystalline lamellae .

研究了四种不同粒径PP／PA6微粉制备共混物的结构与性能，在2个4%含量下，共混物拉伸强度随粒径增大而增加；

The structure and properties of SBS / different plastic powder blends were studied .

实验结果表明，选择马来酸酐接枝的均聚聚丙烯（PPgMAH）作为增容剂，所制得的动态固化PP/环氧树脂共混物的力学性能较好。

The results show that maleic anhydride grafted PP ( PP-g-MAH ) is a better compatibilizer .

选择较高的加工温度及较低的剪切速率，可以使共混物PP在高组成比时成为分散相。

Higher spinning temperatures and lower shearing rate caused PP to form disperse phase at higher composition ratio .

纳米无机物改性EVA、LLDPE及其共混物的研究

Research on Nanometer Inorganic Modification of EVA , LLDPE and Their Blends

EVA与PE共混物接枝MAH的粘合性能研究

Study on Adhesive Properties that Polyblends of EVA and PE are Grafted with Maleic Anhydride

用J积分的方法表征了PP/PC共混物的断裂韧性。

J integral principle was used to characterized the fracture toughness of PP / PC blends .

尽管共混物含30份的PA，但仍具有优良的耐吸水性；

EPDM / PA blend , including 30 phr PA , gained excellent water resistant property .

ABS含量为60%时，HPVC/ABS共混物的流动性能最好。

The flow properties of HPVC / ABS blends became the best at ABS amount 60 % .

氯化亚锡对BR／CPE共混物自硫化的影响

Self-vulcanization of BR / CPE Blend Accelerated by Stannous Chloride

HIPS/LLDPE中DCP与SBS的协同作用及其共混物性能

Synergism of sbs-dcp in hips / lldpe blends and their property

随EPDM含量增大共混物力学性能提高

And the physical properties of the blend increased as the EPDM proportion increased

用DSC分析不同条件下PA66/TLCP共混物的熔融与结晶行为

Melting and Crystallization Behaviors of TLCP / PA66 Blends Obtained in Different Conditions Based on DSC Analysis

结果表明，共混物的拉伸模量、屈服应力随PMMA含量增加略有增大。

Tensile modulus and yield stress of blends increase with concent ratio n of PMMA .

SEP对PP/PS共混物的增容作用

Effects of SEP on The Compatibilization of PP / PS Blends

EPDM对PP/LDPE共混物力学阻尼及结晶行为的影响

Effect of EPDM on mechanical damping and crystallization behavior of pp / ldpe blends

PEO／EVA共混物的结构研究

Studies on Structure of PEO / EVA Blends