涂层性能

  • 网络Coating performance;Coating Characteristics
涂层性能涂层性能
  1. 冷喷涂Al涂层性能及沉积行为的分析

    Analysis on depositing behavior and properties of Al coating by cold spraying

  2. 离子束加速电压对真空电弧沉积Ti(C,N)涂层性能的影响

    Influence of ion acceleration voltage on properties of Ti ( C , N ) coating obtained by vacuum arc

  3. 高温SiC/Al2O3复合抗氧化涂层性能的研究

    Study the oxidation-resistent property of SiC / Al_2O_3 composite coat at high temperature

  4. 切削工具的TiN、TiC涂层性能的试验分析

    Test and Analysis of the TiN and TiC Coating Performances of Cutting Tools

  5. 不同氧化物对C/C复合材料SiC涂层性能的影响

    Effect of different oxide additives on the properties of a SiC coating on carbon / carbon composites

  6. 比重及Al(H2PO4)3/SiO2比值对绝缘涂层性能的影响

    Influence of Specific Gravity and Al ( H_2PO_4 ) _3 / SiO_2 Ratio on Performance of Insulation Coating

  7. 火焰喷涂尼龙/纳米TiO2复合涂层性能的研究

    Properties of Flame Sprayed Nylon 1010 / Nano TiO_2 Composite Coating

  8. 钢管热涂EP和热涂PE的工艺特点及涂层性能对比

    Process Characters of Steel Pipe Heat Painting EP and Heat Painting PE , Comparison of Paint Properties

  9. 用扫描电子显微镜(SEM)、划痕仪、显微硬度计、表面粗糙度仪、微磨损试验机等表征了钼涂层性能。

    Molybdenum coating properties were studied by SEM , scratch tester , microhardness tester , surface roughness tester and micro-wear test machine .

  10. 结果显示,采用MC为胶粘剂、较低的裂解升温速度制备的预涂层性能最好;

    The result shows that the precoating has good properties by using MC as adhesive and adopting slow pyrolysis speed ;

  11. Al含量对电弧离子镀共沉积Ti(1-x)AlxN涂层性能的影响

    Effect of Al Content on Properties of Ti_ ( 1-x ) Al_xN Coatings Deposited by Cathodic Arc Evaporation with Independent Ti and Al Targets

  12. TiB2碳胶涂层性能的研究

    Investigation on properties of tib_2 paste coating

  13. WC粉末爆炸喷涂BT-20钛合金的涂层性能研究

    Properties Research on WC Coating on BT-20 by Detonation Gun Spraying

  14. 氧气对316L不锈钢表面等离子体聚合甲基丙烯酸丁酯涂层性能及内皮细胞生长行为的影响

    Effects of oxygen on the properties and behavior of endothelia cells of plasma poly n-butyl methacrylate on 316L stainless steel

  15. 对气体隧道反应室的结构进行了优化,并重点研究了影响制备反应等离子喷涂TiN涂层性能的工艺参数,研究了涂层的力学、摩擦磨损及耐腐蚀等性能,探讨了涂层的形成机理。

    The parameters of reactive plasma spraying TiN coatings have optimized , the mechanical and tribological and corrosion resistant properties of the coatings were investigated , and the formation mechanism was discussed .

  16. 借助于SEM、XRD和粒度分析等手段,研究了将电熔粉碎法中熔块的自然冷却改进为淬冷后对制备的氧化铬粉末和涂层性能的影响。

    The effect of changing natural cooling of clinkers to quenching in fusing and crushing process on the properties of chromium oxide powder and coating was investigated by SEM , XRD and particle size analysis etc.

  17. 镁合金表面冷喷涂快凝Zn-Al合金粉末及涂层性能的研究

    The Research on the Cold Spray Technique for Rapid Solidified Zn-Al Alloy Powder on the Magnesium Alloy and the Property of the Coat

  18. 对E-20进行了填料改性及固化剂配置,并且通过正交试验与极差分析,对涂层性能作了较为深入的研究。

    Orthogonal test and range analysis are used to study the performances of coatings when combined with different modified fillers and curing agents .

  19. 涂层性能测试结果表明,加入经过表面处理的Al2O3后,其耐磨性、附着力明显提高,摩擦质量损失降低了43%。

    The SEM photos demonstrated that the Al_2O_3 powder is well dispersed in resin . The coating testing results showed that the wear resistance and adhesion can be obviously improved and the wear weight loss is decreased by 43 % with the addition of treated Al_2O_3 powder .

  20. 纳米重晶石添加量为1.0%时,涂层性能有较大的提高,T弯从4T改善到2T;耐盐雾时间也由720h增加到1096h,提高了20%以上。

    The performances of composite paint film adding 1.0 % modified nanometer barite were improved largely , the T-bending was improved from 4T to 2T , and the corrosion resistance increased 20 % with its retardation time from 720 ~ 1096h before showing blisters .

  21. 提高耐高温复合涂层性能的研究

    Research on Enhancing Performances of Multilayer Coatings Resistant to High Temperature

  22. 模数对无机富锌涂料和涂层性能的影响

    Influence of Modulus on Inorganic Zinc-Rich Coatings and Its Performance

  23. 以涂塑原纸为纸基的高光喷墨打印纸涂层性能及涂料适性的研究

    The Coat Property and Color Suitability of RC-based High Gloss Ink-jet Paper

  24. 一种新型内孔热喷涂技术及涂层性能研究

    Study on a New Thermal Spray Bore Technology and the Properties of Coating

  25. C/C复合材料抗氧化涂层性能研究

    Capability of Anti-oxidation Coating of C / C Composites

  26. 铝线材喷涂工艺及涂层性能

    Aluminium Wire Spraying Technology and Coat ′ s Behaviours

  27. 高铬镍基合金超音速活性电弧喷涂涂层性能的研究

    Study on the Properties of High Cr-Ni Alloy Coating by Supersonic Arc Spraying

  28. 真空熔结镍基合金涂层性能的研究

    Study on Performance of Vacuum Sintered Ni-based Coating

  29. 陶瓷软线材火焰喷涂距离对涂层性能的影响

    Influence of spraying distance of ceramic soft wire flame spraying on properties of layer

  30. 电熔淬冷制备工艺对氧化铬粉末和涂层性能的影响

    Influence of Fusing and Quenching Process on the Properties of Chromium Oxide Powder and Coating