液压传感器

  • 网络Hydraulic sensor;presice;MD-M
液压传感器液压传感器
  1. 基于FBG液压传感器的桥梁挠度监测研究

    Research on Bridge Deflection Monitoring Based on FBG Liquid Pressure Sensors

  2. 矿用频敏型液压传感器的研究

    Study on Hydraulic Sensing Technology of Frequency-sensitive Type of Mine Use

  3. 液压传感器应用中的软件误差补偿及抗干扰

    The Software Methods to Eliminating Disturbance and Offsetting Error for Pressure Sensor

  4. 基于神经网络与虚拟仪器技术的液压传感器设计

    Design of Hydraulic Transducer Based on Technology of Neural Network and Virtual Instruments

  5. 基于蓝牙技术的集成液压传感器设计

    Design of integrated Sensor based on Blue Tooth Protocol

  6. 这个技术员说,“我们有几个液压传感器显示数值低的离谱。”

    The technician said ," We 've had some hydraulic'ducers go off-scale low . "

  7. 系统硬件由PC机、液压传感器、数据采集卡,模拟输出卡、接口电路和油泵、电动球阀组成的油路系统等组成。

    The system hardware is composed of a personal computer , hydraulic sensor , data acquisition card , analog output card , interface circuits and a oil route and so on .

  8. 介绍了新研制的矿用频敏型振弦式液压传感器的结构、工作原理、标定和质量保证措施,并对传感器理论公式进行了修正,达到了较高精度。

    Abstract The paper describes the structure , working principle , calibration and means to assure quality of a newly developed Hydraulic Sensor of Frequency-sensitive and vibrating string type . The theoretical equation of the sensor was modified to attain higher accuracy .

  9. 前冲炮液压速度传感器的设计

    Design of Hydraulic Velocity Sensor of Soft Recoil Mechanism

  10. 主要介绍液压位置传感器的工作原理,以及根据生产中的实际情况,通过电路改进,调整其零点和量程,以达到满足生产的要求。

    Introduces mainly the principle of position sensor , in order to meet the demands of production in practice zero point and measurement range are justified by means of improvement of electric circuit .

  11. AGC系统液压缸位移传感器的软修正

    Modification of displacement sensor of cylinder of AGC system

  12. 工程机械液压系统检测传感器的设计

    Design Of The Triune Sensor In The Hydraulic Detector Engineering Machine

  13. 介绍工程机械液压系统检测传感器的构成及三位一体的设计方法,分析其组成部分的工作原理、结构特点和性能特点。

    The structure and design method of triune sensor of hydraulic system detector is introduced , working principle of each part , the characteristic of structure and performance are also analyzed .

  14. 滑阀机构液压卡紧无传感器诊断方法研究

    Research on Sensor Free Diagnosis Method of Spool Sticking

  15. 液压支架中压力传感器的设计

    Design of Pressure Sensor in Hydraulic Supports

  16. 为此,首先阐述了摊铺机熨平装置的找平原理及影响摊铺平整度的因素,然后对摊铺机自动找平控制系统中的液压系统与超声波传感器做了详细的分析。

    So , firstly the leveling principle of the ironer of paver and the factors that affect the roughness of pavement is presented , and then the hydraulic system and the ultrasonic sensor is analyzed in detail .

  17. 它以谐振弦型液压压力盒为传感器,以单片机为核心构成,具有检测速度快、精度高、稳定可靠等特点,可用于比较恶劣的环境中。

    It has a computerized centre and a resonance wave style hydraulic pressure box as sensor , it can be used in adverse circumstances because of its advantages of high speed measuring , high precision and high stability .

  18. 根据转台的运动指标,选取了电液伺服阀、恒压变量泵、伺服液压缸和位移传感器等的型号,完成了转台液压系统的原理图和实际安装图。

    According to the motion index of the platform , the models of electro-hydraulic servo valve , constant force variable pump , servo pneumatic cylinder , displacement sensor etc are selected , the simplified schematic and installation drawing of hydraulic system of motion platform .

  19. 为此,介绍了由伺服阀控制对称液压缸和位移传感器构成的液压位置闭环控制系统及其工作原理,给出了该系统的频率特性及动态响应数学表达式。

    In this paper , the domination principle of the hydraulic position closed-loop system consisted of the position sensor and symmetrical hydraulic cylinder controlled by the servo valve is introduced . The mathematical models of frequency characteristics and dynamic response of the system are discussed .

  20. 提出了一种原位检测液压系统压力的传感器研制方案,试制了传感器的初样,并在飞机综合测试系统台和装甲车上进行了实地测试。

    A kind of research method of sensor to test the hydraulic system pressure on the outer surface of its tube is presented , the sample of sensor was produced , and the spot a check on comprehensive testing system equipment of aircraft and armoured car was made on .

  21. 以盾构掘进机为背景,阐述了其液压推进系统结构设计中的液压缸设计、分区确定和液压缸位移传感器的选取,着重分析了推进液压缸的结构布置方式。

    Taking the shield tunneler as background , design of hydraulic cylinders , determination of sectioning , selection of cylinder displacement sensors in the structure design of its hydraulic propelling system are expatiated with emphasis on the structural layout mode of propelling cylinders .

  22. 在采煤机工况监测系统中为动态测试采煤机液压系统的压力、流量和温度、研制了矿用本质安全型液压多功能传感器。

    A natured safety type multifunctional hydraulic sensor used in coal mine was developed for the dynamic test of shearer 's hydraulic systems pressure , flow and temperature in the shearer 's working state monitoring system .

  23. 整个液压系统由泵站、蓄能器装置、控制阀台、压下液压缸、压力传感器、位置传感器、压力继电器及连接管路等组成。

    The electro-hydraulic servo system consists of pump groups , accumulators , control valves , hydraulic cylinders , various sensors and relays , pipelines and so on .