电容补偿

  • 网络capacitance compensation
电容补偿电容补偿
  1. 模拟变压器电抗的电容补偿

    Series - capacitance Compensation to Over - reactance of Imitating Transformer

  2. 关于变电站电容补偿装置配置的探讨

    Research on the Configuration of the Capacitance Compensation Equipment in Substations

  3. 可控串联电容补偿非线性PID控制器

    Simulation of Thyristor Controlled Series Capacitor in Power System A NONLINEAR PID CONTROLLER FOR TCSC

  4. 提出了一种基于时域仿真的可控串联电容补偿(TCSC)及其附加阻尼控制器的参数优化方案。

    The paper presents a parameter optimization scheme of TCSC and its additional damping controller based on time domain simulation .

  5. 大房500kV线路串联电容补偿站接地设计

    Earth Connection Design for Serial Capacitor Compensation Station of Da-Fang 500 kV Transmission Line

  6. 500kV线路加装串联电容补偿装置的施工

    Construction of series capacitor compensation ( SC ) for existing 500 kV transmission lines

  7. 在可控串联电容补偿装置(TCSC)的研究中,用电容、电感、晶闸管、MOV等元件构造TCSC器件模型。

    The power electronic model of thyristor controlled series compensation ( TCSC ) consisting of capacitors , inductors , thyristors , metal oxide varistors ( MOV ) is led into digital simulation .

  8. 建立了三相感应电动机电容补偿起动系统在dq静止坐标系下的数学模型,模型中考虑了转子参数随转速变化的因素。

    This paper established a mathematical model for the capacitor compensation system of three-phase squirrel-cage induction motor in d-q static coordinates , which took into account the rotor parameters varying with the speed .

  9. 在介绍晶闸管控制串联电容补偿(TCSC)的基本概念和工作原理的基础上,对TCSC的基本运行模式作了阐述。

    Based on the introduction of the basic concept and operation principle for the thyristor controlled series com - pensation ( TCSC ) in a power system , the basic operation modes of TCSC are described .

  10. 在介绍晶闸管控制的串联电容补偿的基本概念和工作原理的基础上,对TCSC的基本运行模式、特性曲线、主要参数和额定值等作了综合论述。

    The basic concept , operation principle , basic operation modes , capability characteristic , main parameters and ratings of the Thyristor Controlled Series Compensation ( TCSC ) in a power system are described and explained in a systematic way .

  11. 介绍了一种CMOS全差分两级OTA,第一级为折叠级联放大器,第二级为共源输出增益级,OTA技术采用了级联密勒电容补偿技术和开关电容共模反馈技术。

    An optimal design of CMOS in fully differential two stage OTA is presented in this paper . The OTA contains a folded-cascode input stage and a common-source output gain stage . Cascode compensation technique and switched capacitor common mode feedback technique are used .

  12. 结果发现:不论金属氧化物避雷器(MOV)是否导通,关键的行波波头信息均不受串联电容补偿的影响。

    The results show that the key travelling wave fault information , the wave front information , is unaffected by the series capacitor bank for metal oxide varistors ( MOV ) as well as other capacitor types .

  13. 以提高牵引网电压水平为主要目标的电气化扩能改造中可供使用的常用调压方法有:调压变压器(VRT),串联电容补偿(SCC)和可调并联电容补偿(APCC)。

    Three voltage regulating methods are usually used in enlarging the power supply capacity of electrified railways : voltage regulating transformer ( VRT ), series capacitor compensation ( SCC ), and adjustable parallel capacitor compensation ( APCC ) .

  14. 我国部分500kV大容量、远距离输电线路拟采用串联电容补偿,因此,扭振研究工作,特别是轴系扭振频率实机测试工作在当前更具有实际意义。

    Part of 500 kV large capacity and long distance transmission lines in China are planned to install series capacitor compensation , therefore , the study of the measurement of torsional vibration on turbine shaft is significant .

  15. 根据微带耦合线的准TEM模参数,推导出相同耦合线Marchand巴伦须满足的导纳方程,讨论了改善巴伦性能的方法&电容补偿法。

    An admittance equation which Marchand balun with equal coupled-lines must satisfy is derived , basing on quasi-TEM mode parameters of microstrip coupled-line . Furthermore a technique - adding lumped capacitances at the ends of the coupled line-to improve directivity of microstrip couplers is discussed .

  16. 本文主要讨论在YN,d11牵引变压器的轨地回流线上设置串联电容补偿装置,重点介绍这种电压补偿方式的工作原理、基本参数计算以及主接线形式。

    Discusses the setting of compensation of serial capacitance in track-rail return cable in YD , d11 traction transformer , principally introduces the working principles , calculation of basic parameters and the key forms of wiring of this kind of compensation of serial capacitance .

  17. 牵引变压器轨地回流线的串联电容补偿

    Compensation of Serial Capacitance of Track-rail Return Cable in Traction Transformer

  18. 并联电容补偿装置在施工变电站中的应用

    Application of parallel connection capacitance compensating sets for transformer substation construction

  19. 电容补偿与通用变频器节能原理及合理选用

    Energy-saving fundamentals of capacity compensation and general converter and its selection

  20. 硅铁电弧炉的分布电容补偿分析

    Compensation Analysis of the Ferro-silicon Electric Arc Furnace 's Discrete Capacitor

  21. 带串联电容补偿装置的电力牵引网故障测距研究

    Research on fault locating of power traction system with series compensation

  22. 快脉冲传输线分布电容补偿模型和计算方法

    Distributed Capacitance Compensation Model and Computing Method for Fast-Pulse Transmission Line

  23. PC-Ⅲ型膜片钳放大器自动电容补偿的实现

    Realization of Automatic Capacitance Compensation in PC ⅲ Patch Clamp Amplifier

  24. 串联电容补偿的平行双回线上方向继电器的性能

    Performance of directional relay on Series Capacitor Compensated parallel double-circuit lines

  25. 带串联电容补偿装置的高压输电线路双端故障测距新算法

    A new accurate two-terminal locating algorithm for series compensated line

  26. 电容补偿式轨道电路若干问题的研究

    Study on Some Problems of Track Circuit with Compensating Capacitors

  27. 变电所电容补偿控制方法的研究

    Study of a control method for capacitance compensation at substation

  28. 异步电动机电容补偿起动过程的仿真研究

    Simulation Study on Capacitor Compensation Starting Process of Three Phase Asynchronous Motor

  29. 串联电容补偿系统保护功能与现场应用分析

    Protective Function of Series Capacitor Compensation System and Field Application

  30. 泵站同步电动机电容补偿起动过程的仿真分析

    Compensation analysis for the staring procedure of synchronous motor with paralleled capacitor