电镀

diàn dù
  • plating;electroplate;galvanization;electrofacing
电镀电镀
电镀 [diàn dù]
  • [electroplate;galvanization] 电镀:利用电解作用使金属或其它材料制件的表面附着一层金属膜的工艺。可以起到防止腐蚀,提高耐磨性、导电性、反光性及增进美观等作用

电镀[diàn dù]
  1. 基于触摸屏和PLC的电镀控制系统的设计

    Electroplate System Design Based on Touch Screen and PLC

  2. PLC在电镀生产线上的应用

    Application of PLC in Electroplate Production Line

  3. 低氰电镀光亮22K金工艺研究

    Study on low cyanide bright 22K gold plating process

  4. 总结了NiFe合金电镀工艺的优点。

    The advantages of Ni-Fe alloy plating technics were summarized .

  5. 电镀液中Cr(Ⅵ)含量的方波伏安法测定

    Determination of Cr (ⅵ) Ion in Electroplating Solution by Square Wave Voltammetry

  6. 高速电镀锡薄钢板(DI材)用气相缓蚀剂的研究

    Vapor phase corrosion inhibitors used for drawn-and-ironed ( di ) material

  7. 纳米ZrO2在Ni基电镀液中悬浮稳定性的研究

    A Study on Stability of Nano-ZrO_2 in Ni-based Electroplating bath

  8. 电镀添加剂的NMR定量分析

    Quantitative NMR analysis of electroplating additive

  9. 通过电镀法制备了功能梯度Ni-P合金镀层。

    The function gradient Ni-P alloy deposit was prepared by plating .

  10. 将其应用于光亮镀镍电镀溶液中除去微量Cu(2+)杂质,效果良好。

    Their effect of re - moval of trace Cu ~ ( 2 + ) from bright nickel electroplating solution is good .

  11. ICP-AES法测定电镀硫酸铜中杂质元素

    Determination of Trace Element Impurities in Copper Sulphate for Electroplating by ICP - AES

  12. Sn和Sn合金电镀

    Sn and Sn Alloy Electroplating

  13. 电镀CBN珩齿刀工艺的分析与改进

    Analysis and Improvement on the Process of Electroplating CBN Gear-honing-tool

  14. 电镀废水中的Cr(VI)和Cr~(3+)快速测定方法的研究

    Study on Method of Fast Measurement for Cr ( VI ) and Cr ~ ( 3 + ) in Electroplating Wastewater

  15. 直流电镀所得Fe-P非晶态合金镀层很脆,用交直流迭加电流电镀可以使镀层韧性得到很大改善。

    Electrodeposited amorphous Fe-P alloy film by direct current are extremely brittle . The amorphous Fe-P alloy films with significantly enhanced ductility can be obtained by asymmetrical alternating current .

  16. 电镀PDC石油全面钻头及其在油气田中的应用

    Electroplated PDC Bit for Petroleum Full Face Drilling and Its Application in Oil and Gas Fields

  17. 研究了阴极电流密度、微粒浓度、pH值、搅拌方式和表面活性剂种类以及浓度等对镀层沉积速率的影响,为正确制定电镀工艺提供了依据。

    The effects of cathodic current density , concentration of suspended nano-SiO2 powders , pH value , stirring style and concentration of surfactant agent on the deposition rate were studied .

  18. 碱性锌酸盐电镀液中(pH>13)锌离子主要是以四配位体Zn(OH)2-4的形式存在;

    Zinc ions mainly exist in the form of Zn ( OH ) ~ ( 2 - ) _4 in the alkaline zincate bath ( pH > 13 ) .

  19. 针对铌镁酸铅(PMN)基弛豫铁电陶瓷电镀镍后性能失效行为,采用介温谱、绝缘电阻测量及高温退火方法进行了研究。

    Effects of nickel electroplating on the degradation of electrical properties of PMN based ferroelectrics were studied .

  20. 甲烷磺酸电镀Sn-Pb合金添加剂研究

    An Investigation on Additives in Methanesulfonic Acid Tin-Lead Alloy Electroplating

  21. 电流参数对Fe-P非晶态电镀层韧性的影响

    Effect of Current Parameters on Ductility of Electrodeposited Amorphous Fe-P Alloy Films

  22. 珩磨轮悬&埋法电镀CBN工艺自动控制系统的研究与开发

    Research & Development of Automatic Control System on the Process of Electroplating CBN Honer with " Suspension-burying " Method

  23. 输油钢管电镀Zn-Ni合金

    Zn-Ni alloy electroplating of steel oil pipe

  24. PVD法及与电镀复合制备光纤腐蚀传感器的Fe-C合金敏感膜

    PVD and its incorporation with electroplating to fabricate Fe-C alloy film of fiber optical corrosion sensor

  25. HEDP电镀铅锡合金生产情况

    The production of HEDP Pb - Sn alloy plating

  26. 将传统的化学处理法与絮凝技术相结合,配制选择性好的RSL复合絮凝剂对电镀铬废液进行净化处理、纯化等,得到纯度较高的Cr(VI)液;

    Combinating the traditional chemical method with chemical flocculation technology , we found a new complex flocculation to treat the electroplating chromium wastewater .

  27. Zn-Mn合金电镀工艺及其基础理论研究

    A Study on Process and Fundamentals of Zn-Mn Alloy Electrodeposition

  28. Sn-Ag合金系电镀液和电镀工艺

    Sn - Ag Alloy Series Electroplating Solution and Electroplating Process

  29. 重量法分析HEDP电镀溶液成份的原理和方法

    The Theory and Practice of Applying the Weight Method for Analysing the Composition of HEDP Solutions

  30. 铝基电镀Pb-Sn合金工艺及镀层性能研究

    Study on the Technology of Pb-Sn Alloy Electroplating on Aluminium and the Performance of the Coating