税控

  • 网络tax control
税控税控
  1. 但是,原有的网络税控器采用ARM的体系结构,设计较为固定,改动不够灵活,系统生命周期较短。

    However , the existing network of tax control device with ARM architecture , design is more fixed , change is not flexible enough , the system life cycle is shorter .

  2. 本课题采用基于FPGA的SOPC技术设计网络税控器,则能够达到很高的灵活性,避免了设计过时的风险,大大提高了设备的使用周期。

    The subject of FPGA-based SOPC design network technology tax control device , you can achieve high flexibility and avoid the risk of outdated design , greatly improving the equipment life cycle .

  3. 基于FPGA的高速大容量税控智能盘的研究与原型设计

    Research and Prototype Design of High-Speed Large-Capacity Tax Smart Disk Base on FPGA

  4. FPGA被动串行配置方法在税控机中的应用

    FPGA PS Configuration Applied in Fiscal Cash Register

  5. 目前,此开发平台已成功地应用于ATM自动柜员机、嵌入式税控收款机等银税类终端产品的开发。

    Now , the software development platform apply to ATM , POS and so on .

  6. 基于ARM和μClinux的税控收款机的设计与实现

    Design and Implement of the Fiscal Register Based on ARM and μ Clinux

  7. 提出了采用点对点通信方式,通过对Modem及串口通信的控制,实现防伪税控软件接口。

    A new type of software interface , through serial communication with Modem , is proposed in this paper .

  8. 基于TCP/IP和PPP实现税控机网上数据传输

    Communication of Fiscal Cash Register through Internet based on TCP / IP and PPP

  9. 基于uClinux税控系统的数据保护方案设计

    Approach to protect data on tax - controlled system with uClinux

  10. 以此为契机,我们研制和开发了新一代的基于32位ARM处理器的嵌入式系统的税控收款机ZTax,以满足市场的需要。

    So , under this background , we have designed and developed the new-generation of Tax-controlled Cash Register based on embedded system with 32-bit ARM CPU .

  11. 基于SOPC的无线网络税控器架构的研究与原型设计

    Research and Prototype Design of the Architecture of the Wireless Network Tax Controller Based on SOPC

  12. 本文主要介绍的是基于ARM硬件平台的税控POS机Bootloader的设计与实现。

    This paper mainly introduces the design and actualization of Boot Loader of JavaPOS machine based on the ARM processor hardware platform .

  13. 简要介绍了智能卡(IC)原理,并对税控IC卡在税控流程中的应用进行了研究。

    This paper briefly introduces the theory of intelligent card , and then discusses the application of fiscal IC card in the process of tax control .

  14. 基于S698ECR的税控机解决方案

    The Taxing Machine Project Based on S698_ECR

  15. 针对ARMCPU和税控收款机的特点,设计开发了用以实现消费交易功能的磁卡接口平台。

    The platform of magcard that realizes the function of trade is designed and realized in this paper , as to ARM CPU and the fiscal cash register .

  16. 该款金融税控收款仉同时具有收款、金融POS、税控和商品管理功能。

    The POS has many functions , such as selling , financial POS , tax-control and merchandise management .

  17. 接着是网络税控器解决方案的探讨和选取,这包括构建SOPC系统的方案和嵌入式操作系统的方案。

    Then the network tax controller device solutions and selection , including the SOPC system construction program and embedded operating system program .

  18. 税控POS机是国家立项项目,并且该公司对POS机的开发和应用方面在国内首屈一指,有绝对的市场优势。

    The company is the second to none in the development and application of the POS machine and has absolute advantage in the market .

  19. 合理的硬件设计、DES加密以及程序存储器扩展技术使该税控收款机具有成本低、安全可靠、功能强大等优点。

    By rational hardware design , DES encryption and program memory extension , this machine features following virtues : security , credibility , excellent user interface and powerful .

  20. 应用MPI软件对税控收银机外壳制品的浇口位置进行优化设计。

    Moldflow Plastics Insight ( MPI ) was applied to optimize the design of gate location of an injection mould for the face cover of a cash register .

  21. 第四章详细介绍了税控收款机主板的硬件设计,主板包括CPU、LCD液晶驱动、FLASH、串口等常用的外设。

    The forth chapter introduces the mainboard 's hardware design of tax controlled receiver . The mainboard contains common facility , such as CPU , LCD drive , FLASH , serial interface , and so on .

  22. 本文讨论的POS税控盒项目应用于税务行业,主要完成数据的截取、加密、存储和传输等功能。

    The thesis discusses the POS tax box , which is used in the tax department and it could intercept data , encrypt data , store data and transfer data .

  23. 目前基于普通PC的税控收款机有着成本过高、管理不方便等缺点,而网络计算机则具有低成本、可靠性,安全性高、零管理等优势。

    The nowaday fiscal cash register which is based on PC has some disadvantages , such as high cost , managing inconvenience . Compared with PC , network computer has many advantages such as low cost , managing convenience , high safety and reliability etc.

  24. 本文讨论的POS税控盒连接在POS机上,通过公用电话交换网(PSTN)和税务部门的主机进行数据通信,完成税务部门对POS机数据的查询工作。

    In order to finish the data checking , the POS tax box system communicates with PC of tax department through PSTN , it is connected with POS in the other hand .

  25. 发票明细用MAC码加密,且将MAC码保存于税控器和打印在发票上,用于税务局的核对。

    The detail of the invoice is encrypted with MAC technology , and keeps MAC yard in the POS machine and types on the invoice . The MAC yard can be used in the checking of the tax bureau .

  26. 具体实现中,以PKI为安全基础,以CPU卡为安全控制体,以税控器为安全操作平台,结合税控应用系统,保障税控系统的数据安全性。

    In our system , regard PKI as the safe foundation , regard CPU card as the control of the security , regard POS machine as the safe operating platform . Combine the tax-controlled application system to ensure the systematic data security .

  27. μPSD32xx单片机在税控器中的应用

    Application of μ PSD32xx in the fiscal processor

  28. 本课题所开发的项目是嵌入式Modem&青岛海信智能商用有限公司正在开发的税控POS机中用于数据传输的嵌入式调制解调器。

    The developing project of this thesis is an Embedded-Modem , which is used in data transmission of Tax-controlling POS machine developed by QingDao Hisense Intelligence Commerce Inc. The Tax-controlling POS machine is a project set up by the government .

  29. 国家制定了国标GB18240,规定了税控收款机的通用要求、试验方法和检验规则。

    A national standard GB18240 has been made for FCR to define the general specifications , test methods and inspection regulations .

  30. 结合一种税控收款机用户界面的设计,讨论了利用MCS-51单片机在大屏幕液晶显示器上开发人机交互界面程序的方法,并具体给出了资源图标、菜单、进程条等效果的实现原理。

    Combining the user interface design of a Tax Controlled Gathering Machine , discusses several methods of developing interactive user interface program on large screen LCD by means of MCS-51 Single chip , and analyses the realization theory of effects such as icon , menu and progressing bar in detail .