绝缘结构

  • 网络Insulating structure;insulation system;EIS;Micro Mono-Filament
绝缘结构绝缘结构
  1. 变频电机绝缘结构在工频下局部放电测量的探讨

    Discussion of Electrical Insulation System Used in Variable Freqency Motor Detecting Partial Discharge at Power Frequency

  2. 变频调速电机的绝缘结构设计

    Design of Insulation System of Variable-Frequency Adjustable-Speed Motor

  3. 1.2MV全封闭Marx发生器的绝缘结构设计

    Insulation Design for a 1.2 MV Enclosed Marx Generator

  4. 定子绕组采用F级绝缘结构,并在绕组端部有可靠的固定及绑扎。

    The stator winding is F class insulation structure , the end of winding is fixed and binded reliably .

  5. OCT有如下优点:不含油,尺寸小,绝缘结构简单,不会有安全隐患;

    OCT has the following advantages : oilless , small size , simple insulation structure , no hidden trouble in safety ;

  6. 直流输电±800kV换流变压器的绝缘结构分析

    Insulation Structure Analysis of ± 800kV Converter Transformer for DC Transmission

  7. 10、35kV级变压器主绝缘结构试验研究

    Testing Study of the Main Insulating Structures in 10 、 35kV Power Transformer

  8. 在CMOS工艺完成后,辅以与CMOS工艺兼容的体硅微机械加工工艺,制备微桥形式的热绝缘结构,从而方便地实现了CMOS读出电路与探测器阵列的单片集成。

    After finished the CMOS process , to realize the monolithic integration of CMOS readout circuits with detector arrays , the thermally insulated microbridge structure could be formed by front-end etching of the substrate using TMAH solution compatible with CMOS process .

  9. XEC-788电机用电枢线圈绝缘结构及工艺研究

    Research on an Armature Winding Insulation System and its Production Process of XEC-788 Motor

  10. 同时研究电缆各绝缘结构对电缆热能传导产生的影响,进而推出电力电缆载流量的计算公式。其次,本文设计了一套基于GPRS的电缆载流量预警系统。

    The impact of cable heat conduction produced by cable insulation structure is researched , and the formula of the the current carrying capacity of cable is derived . Secondly , a predict and alarm system for power cable ampacity based on GPRS is designed .

  11. 为了降低500mA直流高压加速管高梯度区的电位梯度,对加速管轴向绝缘结构进行优化设计。

    Axial insulation structure was optimized to reduce potential gradient in DC high-voltage accelerating tubes of 500 mA .

  12. 光学电流互感器(OCT)与传统电流互感器相比,具有抗电磁干扰能力强、动态范围宽、绝缘结构相对简单和易与微机接口的优点,在电力系统中有广阔的发展前景。

    Compared to traditional current transformer , Optical current transformer ( OCT ) has strong anti-electromagnetic interference ability , wide dynamic range , simple insulated structure and easily connected to computer , so , there are broad development prospects in electric power systems .

  13. 近年来.我国的电力变压器业界从国外引进了APG技术的整套设备、配方和配套化工材料,使我国环氧树脂整体绝缘结构的品质有了大幅度的提高。

    Over the years , the overall equipment system , composition and fitting materials of APG were imported by some power companies in China , so that the quality of puring insulating structure was enhanced greatly .

  14. 论述对照日本已经运行的500kVXLPE电缆的绝缘结构参数和绝缘质量控制要求,采用绝缘统计设计方法,按相同可靠性原则作为我国500kVXLPE电缆确定电缆绝缘厚度和绝缘质量控制要求的基础是合理的。

    The philosophy to determine the insulation thickness of 500 kV XLPE cables in terms of statistical design procedures and the quality control requirements in reference to those of 500 kV XLPE cables being operated in Japan is justified .

  15. 简要介绍高压电机少胶VPI绝缘结构的性能评定方法及部分测试结果,阐明国产与进口材料匹配使用的可行性方案。

    This text briefly introduces capability assess methods and some test results of few glue VPI insulation structure in high voltage electromotor . It also clarifies a feasibility project of matching use of internal and import material at present .

  16. 本型电流互感器为半封闭环氧树脂浇注绝缘结构,是在老产品LAJ-10结构基础上加以改进而成。

    This type of current transformer is a semi-enclosed cast resin insulated construction and an improvement based on the construction of the old product LAJ-10 .

  17. 主要介绍低温超导托卡马克HT-7U中磁体的绝缘结构,绝缘材料的特性,绝缘结构形成的工艺,绝缘层的电性能和力学性能等。

    The insulation formation of cryogenic superconducting magnet in Tokamak HT-7U is introduced , and the properties of insulation materials are analyzed . The VPI ( Vacuum Pressure Impregnation ) technology of the magnet coils and the electric and mechanic properties of insulation layers are explained .

  18. 研究了大型发电机的绝缘结构。

    This paper studies the structure of the generator ' insulation .

  19. 散热匝磁极线圈制造及匝间绝缘结构研究

    Manufacturing of Radiating-Heat-Turn Pole Coils and Study of Turn-to-Turn Insulation Construction

  20. 电力变压器主绝缘结构中的角环

    Discussion on Angle Rings in Main Insulation Configurations of Power Transformer

  21. 用遗传算法进行电力变压器纵绝缘结构优化设计

    Optimal graded insulation design of power transformer windings by genetic algorithms

  22. 非制冷热释电薄膜红外探测器热绝缘结构的研制

    Fabrication of Thermal Insulation Structure for Uncooled Pyroelectric Thin Film IR Detector

  23. 它与绝缘结构设计中的其他内容密切相关。

    It is interrelated closely to other contents of insulation construction design .

  24. 超高压变压器线圈分区绝缘结构设计的优化算法

    An Optimization Algorithm for the Graded Insulation Design of EHV Transformer Windings

  25. 电力变压器电场强度和绝缘结构的自动设计

    Automatic design of electric field Intensity and insulation structure in power transformer

  26. 定子线棒快固化主绝缘结构和工艺研究

    Study on Quickly-curing Main Insulation Structure and Insulation Technology for Stator Bars

  27. 从以上试验表明该绝缘结构是稳定可靠的。

    These test proved that the insulation structure is stable and reliable .

  28. 绝缘结构,并创建一个可密封的信封。

    The structure insulates and creates an envelope that can be sealed .

  29. 基于陶瓷-金属焊接的强流二极管绝缘结构设计

    Insulation Structure for a High Current Diode by Ceramic-metal Welding

  30. 电机绝缘结构设计中材料的合理选用

    Rational Choice and Use of Materials in Insulation Construction Design for Electric Machines