设备生产率

本文介绍了应用可编程序控制器（简称PLC），结合电磁离合器和电磁制动器来实现改变制灯设备生产率的一种简易方法。

This paper introduces a simple method of applying PLC combining with electromagnetic clutch and electromagnetic arrester to realize changing lamp device 's productivity .

虚工件法&提高柔性制造设备生产率和柔性的一种新方法

Virtual Part-A New Concept for Increasing Productivity and Flexibility of Flexible Machines

浅谈提高小型矿山无轨设备生产率的途径

Brief Discourse on Productivity Improvement Method for Trackless Equipments in Small Mine

提高路用改性沥青成套设备生产率的途径

The Way to Improving Road Modified Bitumen Equipment Productivity

经过应用验证了该设备生产率高、适用性强.采用金刚石铰刀加工阀孔，生产率高，刀具寿命长，表面粗糙度低。

The machining of valve bore with diamond reamer features high productivity , long service life of reamer and lower surface roughness .

对卧式振动沸腾床冷却旧砂的实验结果表明：振动沸腾床的临界流态化速度，随着抛料指数的增大而降低；过共振振动沸腾床，抛料指数与设备生产率有关。

The experimental results of cooling used sand using horizontal vibrating fluidized bed show that the critical fluidized speed is reduced along with increasement of throwing index andover-resonance vibrating fluidized bed and throwing index are related to equipment productivity .

在当今造型设备生产率相当高的情况下，不论是系统控制还是型砂性能在线自动检测，都只有依赖和应用微机才有可能实现。

At present , on the condition of the production rate of molding equipment being considerably high , whether the property of molding sand is systematically controlled or automatically tested in line , it can only be achieved by use of microcomputer .

随着轧机自动化水平的提高，液压AGC系统故障诊断技术已成为现代化轧机的关键技术之一，开展液压AGC系统故障诊断技术的研究对提高轧机设备的生产率、提高设备的维护管理水平具有重要意义。

Along with the improvement of the automation level of rolling mill , fault diagnosis for hydraulic AGC systems becomes one of the key techniques of modem rolling mills . It is highly important to develop such techniques for improving the productivity and the maintenance level of plant .

沥青混合料搅拌设备实测生产率修正系数的确定

Determination of Real Output Correct Coefficient of Asphalt Mixing Plant

生产设备的生产率、安全性、维护性的评价经验。

Production equipment design and remodeling high skill experience .

间歇强制式沥青砼搅拌设备高原生产率及燃油消耗率的修正

Revision of the productivity and consuming rate of fuel of asphalt batch mixer under tableland circumstance

提高设备的生产率，减少库存费用是工业企业关心的问题所在。

Raising the rate production of equipments , reducing the stock expenses is the main problem that the industrial corporation concerns .

一旦出现死锁，系统生产就会出现停顿，从而导致昂贵设备的生产率低下，造成生产企业的经济损失，有时候甚至会造成灾难性的后果。

Once deadlock occurs , the flexible manufacturing system will be halted , resulting in low productivity of expensive equipment , sometimes even cause significant economic losses and catastrophic consequences .

带式输送机作为一种重要的散装物料输送设备，生产率高，优势明显，在各个行业都得到了广泛的应用，尤其是通用带式输送机的运用更为常见。

The belt conveyor as an important bulk materials conveying equipment , high productivity and obvious advantages , has been widely used in various industries , especially in the more extensive use of common belt conveyor .

制造系统的设备布局与生产率和生产成本密切相关，布局设计是制造系统设计者面临的关键问题之一。

The facility layout of manufacturing system is related closely with the production rate and cost , so the layout design is one of the key problems with which the designers must confront .

由于制造系统的设备布局与生产率和生产成本密切相关，所以一个好的布局可以提高制造效率并节省大量的制造成本，因此探讨研究制造系统的设备布局具有重要的理论意义和应用价值。

The layout of manufacturing system is related closely to the production rate and cost and a good placement of facilities contributes to the overall efficiency of operations and can reduce operating expenses , so studies of facility layout design have both theoretic and applicable value .

沥青混凝土搅拌设备验收检测中生产率的确定方法

Determining Method of Output of Bitumen Concrete Mixing Plant During Reception Test

先进的生产工具、机器设备对于提高劳动生产率具有重要作用，但认为物化劳动创造价值是缺乏理论依据的。

The introduction of advanced implements , machines and equipments will improve labor productivity , but to believe materialized labor will create value lacks of academic supports .

飞剪控制是冷连轧带钢生产过程中的重要控制环节，飞剪的正常运行对减少生产设备事故、提高生产率发挥着不可替代的重要作用。

Flying Shear ' Control palys an important role in the process of cold rolling strip production control link , also , the normal operation of flying shear plays an irreplaceable important role for reducing accidents and improving productivity .

通讯设备的日益复杂且需求也越来越多，同时通讯设备的生产率也日益提高，因此，对通讯设备出厂时各种硬件质量的保障提出了更高的要求。

Communication equipments are becoming more and more complicated and requirements to communication is greatly increased , at the same time , the productivity of equipments are increasing , so the guarantee of a variety of hardware quality of communications equipments has faced higher demands in the production process .

整套设备在人工喂入籽棉的条件下，已达到设备的设计生产率。

Because a whole equipment was under artificial feeding unginned cotton condition that it has come to the design productivity about the equipment .

并完成了喷补机的密封设备和孔洞式料位计的相应改进，并推导了自然条件下设备的生产率的计算公式。

At last , the paper completes the advanced design of spray repair equipment and the hole material level detection unit , and deduces the productivity formula under nature conditions .