输入输出模型

  • 网络input-output model
输入输出模型输入输出模型
  1. 针对预测控制约束不可行和优先级问题,提出了利用混合逻辑动态(MLD)框架处理的混杂方法,并将该方法从状态模型推广到输入输出模型,使得该方法具有更加广泛的适用性。

    A hybrid method using mixed logical dynamical ( MLD ) framework to handle infeasibility and constraint prioritization issues in MPC is introduced and then extended from state model to input-output model .

  2. 基于输入输出模型广义预测控制的并行算法

    Parallel Algorithm for Generalized Predictive Control Based on Input-Output Model

  3. 第一个案例是服务端文件传输,用于验证改进的网络输入输出模型对CPU上下文切换的影响。

    The first case is a file transfer server to verify the improved network input-output model by effect of CPU context switching .

  4. 该方案基于所提出的输入输出模型转化为状态空间模型的定理,使相应的状态空间模型在CARMA模型辨识之后也被辨识。

    Based on the presented theorem of transforming I / O model to state space model , corresponding state space model has been identified by this scheme after CARMA model is identified .

  5. 分布式交互仿真应用系统输入输出模型的研究与实现

    Research on Input-Output Model of Application System in Distributed Interactive Simulation

  6. 关于决策过程,两位学者制作了一个输入输出模型。

    The two scholars made an input-and-output model about the decision-making process .

  7. 基于单元输入输出模型控制系统故障树自动建造的一种方法

    Automatic Generation of Fault Trees for Control Systems Based on Unit I / O Model

  8. 用输入输出模型表示的非线性系统的模糊神经网络滑模自适应控制

    Sliding Adaptive Mode Control Based on Fuzzy Neural Networks for Nonlinear Systems Represented by Input-Output Models

  9. 传统的工业预测控制都是采用输入输出模型,包括参数模型和非参数模型。

    Traditional industrial predictive control uses input / output model , including both parameter and non-parametric ones .

  10. 同时采用人工神经网络的方法,建立了微秒级脉冲电流电化学抛光的网络输入输出模型。

    Simultaneity use the method of artificial Neural-Net , established the net input-output model of u-sec PECP .

  11. 本文分析了系统噪声模型参数估计的优化辅助变量选择问题。给出了交替估计系统的输入输出模型参数与噪声模型参数的精选-优化辅助变量算法。

    In this paper an optimal selection of instrumental variable for the estimation of noise-model parameters is given .

  12. 本文从系统未建模动态和未知有界扰动对控制系统稳定性的影响的角度出发,对一类用输入输出模型表示的非线性系统,采用了一种鲁棒自适应控制方法。

    This paper presents a robust adaptive control scheme for a class of important nonlinearly system represented by input-output models with uncertainties .

  13. 论文研究了一类输入输出模型表示的非线性系统的鲁棒自适应跟踪问题。

    In this paper , the robust adaptive control problem is studied from a class of nonlinear systems represented by an input-output model .

  14. 对基于输入输出模型的一类非线性系统提出了滑模控制方法,解决了一般滑模控制设计需要依赖于系统状态的问题。

    A sliding mode control methodology is presented for nonlinear systems represented by input output models , which does not depend on the state variables .

  15. 通过对系统输入输出模型的分解,将控制器的设计分为两部分,一部分是由滑模控制器实现,另一部分是进行线性反馈控制器的设计。

    There are two parts in the controller design , one is the sliding controller design and the other is the design of linear feedback system .

  16. 然后分析了计算机联锁软件的输入输出模型,并在此基础上构建了基于对比环境的联锁软件测试平台模型;

    Then it analyses input and output fault models of computer interlocking software , on the basis of which this chapter constructs models of interlocking software testing platform which bases on comparing environment .

  17. 对全球生态系统服务价值评估的代表是基于全球静态总平衡输入输出模型的评估和基于全球静态部分平衡模型的评估,中国对区域生态系统服务价值也进行了初步估算。

    To evaluate the global ecosystem services , the input output model of static general equilibrium and partial equilibrium are employed ; then the value of regional ecosystem services has been primarily assessed in China .

  18. 基于观测器的自感知执行器的理论方法,作者的研究着重于:首先,建立双晶片悬臂梁结构的输入输出模型,通过建立数学模型,确定观测器自感知执行器的实现方法;

    Contents include several aspects as follows , first of all , establish model between inputs and outputs of structure of piezoelectric bimorphs of cantilever beams , basing on model , confirm means of realizing self-sensing ;

  19. 在将一般递归网络空间状态模型转化为输入输出模型的基础上,证明了递归网络在一定条件下可对任意非线性特性实现完全逼近。

    On the basis of the transition from space state model into input / output model of the general recurrent neural networks , we prove that recurrent networks may realize entire approximation to arbitrary non-linear property under some conditions .

  20. 针对用输入输出模型描述的非线性参数系统提出的一种鲁棒自适应输出反馈控制法,不必对系统的未知参数进行估计,也不必通过产生附加动态信号来抑制未建模动态。

    A robust adaptive output feedback control scheme was proposed for nonlinearly parameterized systems represented by input-output models . The scheme does not need to estimate the unknown parameters nor to add a dynamical signal to dominate the effects of unmodeled dynamics .

  21. 目前智能天线的理论分析对象一般是直线阵列天线,而我国的TD-SCDMA系统采一用的是圆环阵列天线,本文对圆环阵列天线进行了分析并建立了圆环阵列天线输入输出信号模型;

    The research of smart antenna at present is usually about theory discussion , and the theory analyzing object is usually linear array antenna , but TD-SCDMA adopt circinal array antenna .

  22. 该算法将基于输入&输出模型双线性系统中的双线性项和线性项合并,建立了一种类似于线性系统的ARIMA模型,并充分利用多步最优预测信息,由递推近似实现多步预测。

    The algorithm combines bilinear and linear terms of I / O bilinear system , and constitutes an ARIMA model analogous to linear system . Fully using optimization predictive information , the algorithm realizes multi-step prediction by recursive approximation .

  23. 在分光型红外气体分析器(DIGA)设计原理基础上,建立了基于热释电探测器的红外气体分析系统输入输出数学模型。

    The input and output mathematical model of DIGA ( Dispersive Infrared Gas Analyzer ) system with pyroelectric detector was established according to the design principle of DIGA .

  24. 结合移动切割点的技巧,我们利用HDMR方法来解决多态多相的高维气溶胶输入输出平衡模型。

    The multi-phase and multi-component aerosol thermodynamic input-output systems are solved by the high dimensional model representation ( HDMR ) method combining with the moving multiple cut points .

  25. 用输入&输出模型描述的非线性系统的分散鲁棒自适应控制

    Decentralized Robust Adaptive Control of Nonlinear Systems Represented by Input-Output Models

  26. 离散型输入输出数学模型应用的研究

    Study on the application of discrete input & output mathematical model

  27. 基于多输入/输出模型的噪声源分离方法研究

    Research on Noise Sources Separation Technique Based on Multi Input / Output

  28. 多输入多输出模型可以用于建立机床热行为数学模型。

    A multi-input and multi-output model can be used to establish a mathematical model of machine 's thermal behaviour .

  29. 构造了钢铁生产单元、生产工序及钢铁生产流程的物质流图,建立了物质流输入-输出模型。

    The material-flow diagrams for a production unit , a process and a production flow are constructed , the material input-output model is established .

  30. 地下水平均滞留时间及储存量计算的多输入单输出模型&以山西临汾龙子祠泉岩溶水系统地下水储量计算为例

    A MULTI-INPUT SINGLE-OUTPUT MODEL FOR CALCULATING THE MEAN RESIDENCE TIME / AND THE RESERVE OF GROUNDWATER . its use in the Dragon Spring Karst Groundwater System , Linfen