输送机

带式输送机停止运转了。

The band conveyor stopped working .

带式输送机施工图CAD系统的设计与实现

Design and implementation of construction drawings CAD system for band conveyor

基于PLC控制的皮带输送机系统的应用

Application based on PLC control in the leather belt transport machine

井下带式输送机PLC煤量测量装置

Device for measuring the belt conveyor coal capacity by PLC under the shaft

带式输送机CAD系统中基于ISO标准的参数计算

Parameter Calculation Based on ISO Standard for Belt Conveyor CAD System

建立DTⅡ系列带式输送机CAD图形库的新方法

A New Method for Establishing DT ⅱ Series Belt Conveyor CAD Drawing Base

基于Delphi编程技术的井下带式输送机地面集中控制系统

Ground Centralized Control System of Rubberized Tape Conveyer in Mine Pit on Basis of Delphi Program Technique

TD改进型带式输送机的防跑偏效果

Protective Effect against Side Running of TD Improved Type Belt Conveyor

CST可控传输系统在长运距带式输送机的应用

The Application of CST Controllable Transport System to Belt Conveyor with Long Distance

在对矿井带式输送机选型设计理论以及CAD技术进行系统分析和研究的基础上，研制开发了DTⅡ型带式输送机计算机辅助设计系统。

CAD system for DT ⅱ belt conveyor is developed on the basis of analysis of selecting design theory for belt conveyor and CAD technology .

在分析多机驱动带式输送机工作原理及控制要求的基础上，设计了基于PLC的多机驱动带式输送机控制系统。

On the basis of the analysis of operation principle and control requirements of the belt conveyor driven by multi-motor , the PLC based control system of the multi-motor driving conveyor is designed .

给出了刮板输送机方案设计及选型信息系统业务流程图和UG模型设计加工流程图。

This paper represents the professional diagram of scraping block conveyor scheme designing and type selecting information system and diagram of UG modern designing and machining .

基于Algor软件对带式输送机输送带模型的模拟分析

Based on Algor Program to Rubber Belt Model Imitate Analysis

结果表明：Hopfield型神经网络算法应用于双运带式输送机主参数的模糊可靠性优化设计十分有效。

The result shows : it is effective that we apply Hopfield neural network algorithm to the fuzzy reliability optimal design on the main parameter of conveyer .

对AQ型软起动联轴器结构、原理、性能特点进行了阐述，分析了适合在大型带式输送机使用的工况。

On Soft Start Introduces the construction , principle , characteristics , analyses conditions for suiting big belt conveyer use .

通过动力学分析，CST具有改善带式输送机性能等特点，特别适用于重载带式输送机。CST运行至今，没有出现过故障，带式输送机起、停平稳。

Through the analysis on dynamics , CST soft start could improve the capability of strap transportation machine , especially the over loading ones .

将计算机辅助设计技术应用于大型带式输送机系统的设计，开发了基于CEMA标准的大型带式输送机设计系统。

Application technology of computer-aided design to long belt conveyor system is presented .

文章结合带式输送机电控系统的应用实例，介绍可编程序控制器（PC）对二进制分级电阻切换控制，侧重阐述PC的软件编制及关键技术。

Practical application example of electric control system for belt conveyor is cited to introduce binary stepwise switching of resistance by a programmable controller ( PC ) . Emphasis is given on software development of PC and related key technology .

MSY·80型移动式脉冲气力输送机的介绍

An Introduction to MSY-80 Type Portable Pulse Pneumatic Conveyer

基于AS-i总线技术的输送机控制系统的设计

Design of AS-i based conveyor control system

DDJ型波状挡边带式输送机的使用及改进

Application and reformation of DDJ-undulated baffle belt conveyor

根据以上分析结论，论文研究了带式输送机变频调速自动控制系统，给出了系统组成框图，并建立了软起动、节能调速和功率平衡的PLc控制程序流程；

According to the above conclusion , the paper studies electric control system of belt conveyor applying with frequency converter , introduces component of system , and studies flow chart of PLC program of soft-start , power saving and balance of power .

选取CST可控软启动和变频控制2种在大功率带式输送机上应用的软启动进行分析，重点对带式输送机传动变频控制方法在中、高压领域的应用进行了详细讨论。

This paper analyses a use of soft starting system for large power belt conveyor , such as controllable start system ( CST ) and converter system .

分析了目前常用的几种带式输送机设计标准，选定CEMA标准作为本文的计算依据。

It analyzes often-used design standards of belt conveyor and chooses CEMA standard as its basis .

GZT型辊子输送机系列设计

Design of GZT series of roller conveyor

带式输送机用DZT型板式缓冲器

Model DZT Plate Buffer on Belt Conveyor Pipe conveyor

多点驱动带式输送机电控系统采用CC-Link开放式现场总线技术，具有推广价值。

Application of CC-Link open field bus technology to the electrical control system of the multi-point driving belt conveyer shows its promotion value in use .

从设计参数、驱动装置、结构设计等方面，对带宽14m可伸缩带式输送机进行了详细说明。

The author gives a specification to belt width 1.4 m accordian belt conveyor for design parameters , drive device , structural design etc.

利用超高相对分子质量聚乙烯（PEUHMW）优越的耐磨性和低的相对摩擦系数特性，制备滑板和托辊在带式输送机上替代钢制托辊。

Sliding plates and idlers for ribbon conveyors were prepared by ultra high molecular weight polyethylene ( PE-UHMW ) with abrasive resistance and lower friction coefficient to substitute those made of steel .

带式输送机监控系统网络接入的OPC-Server开发

Development of OPC-Server Accessed to Koyo Strap Monitor and Control System Network